OSCAM/CCCam ECM OK BUT NO VIDEO

Hi all i've configured a linux server with oscam and 2 client cccam.
The client access the server successfully and the server found the ecm in 200ms but on the client there is no video.

PLEASE HELP ME !! :72:

LINUX SERVER
Oscam 1.20 Build9063
Triple card reader powered with a usb hub (powered)

Client Vu+ Solo2
CCCam 2.3.0

Client DM800HD
CCCam 2.3.0

oscam.conf

[global]
logfile = /usr/local/etc/oscam.log
fallbacktimeout = 2600
nice = -1
maxlogsize = 512
preferlocalcards = 1
failbantime = 5

[cache]

[newcamd]
port = 30000@09CD:000000
key = 0102030405060708091011121314

[cccam]
port = 18069
nodeid = F203A4AA104514CC
version = 2.3.0
reshare = 1
stealth = 1

[webif]
httpport = 16002
httptpl = /usr/local/etc/Carbon/IC_CARBON.tpl/
httphelplang = it
httprefresh = 30
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.100,192.168.1.2-192.168.1.254
hideclient_to = 15

oscam.user

[account]
user = xxxxxx
pwd = yyyyyy
hostname = 192.168.0.12
caid = 09CD
uniq = 1
au = ***Italia
group = 1
ident = 09CD:000000

oscam.server

[reader]
label = ***Italia
protocol = smartreader
device = TripleP1;Serial:000007f4
caid = 09CD
boxid = 23456789
ins7e11 = 15
ecmwhitelist = 09CD:B7
ecmheaderwhitelist = 8070B4000001,8170B4000001
detect = cd
ident = 09CD:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1

The client access the server with a C line

Hi diovedeeprovvede I know that S have changed for hd channels but my problem persist also in SD.
I only see free channel

The problem may be the high ECM ?

Thanks for your oscam setting.
I try it but no effect in video on my receiver

I show you the result of client cccam request:
2013/12/04 18:31:30 174AE50 c Vittorio (09CD&000000/046C/2B7C/B7:A438F2ABC2FDC8F0F7119BC38284612E): cache3 (229 ms) by ***Italia
2013/12/04 18:31:40 174AE50 c Vittorio (09CD&000000/046C/2B7C/B7:4B8F306A2C875D757190FB5A35B94DAF): cache3 (228 ms) by ***Italia
2013/12/04 18:31:50 174AE50 c Vittorio (09CD&000000/046C/2B7C/B7:780D5AF05B8E41BB0EB7513188D018BB): cache3 (228 ms) by ***Italia
2013/12/04 18:32:00 174AE50 c Vittorio (09CD&000000/046C/2B7C/B7:0F1B0B44FF0591DC7808FBEE8DD425F8): cache3 (228 ms) by ***Italia
2013/12/04 18:32:10 174AE50 c Vittorio (09CD&000000/046C/2B7C/B7:CE9EA72B7062AB34EA654B9D1BBA5D33): cache3 (228 ms) by ***Italia
2013/12/04 18:32:20 174AE50 c Vittorio (09CD&000000/046C/2B7C/B7:F3ACC3BD57CAE9B543BD291283099A6D): cache3 (228 ms) by ***Italia
2013/12/04 18:32:30 174AE50 c Vittorio (09CD&000000/046C/2B7C/B7:800D31FC60204DAFAE20B2F970D0B96F): cache3 (228 ms) by ***Italia
2013/12/04 18:32:40 174AE50 c Vittorio (09CD&000000/046C/2B7C/B7:BD9F72045C3243FBCA88DD077C823F84): cache3 (229 ms) by ***Italia

It seems that the card and the oscam reply correctly but for some reason the screen on my tv is black :-(

Any idea ?

I don't tell before but the card in the original box works perfectly.

I try a lot of variations of settings but i've the impression that the proble is on the cccam of the client.
When the oscam give the ECM to cccam what kind of work is still to do ?

Hi guys thanks a lot for your help.
I try all the configurations posted in the previews thread but the result is the same:

2013/12/06 01:49:54 975E268 c Vittorio (09CD&000000/046C/2B7C/B7:85F21F64377463270E7B31046556FDD2): found (229 ms) by ***Italia - Disney Junior
2013/12/06 01:50:04 975E268 c Vittorio (09CD&000000/046C/2B7C/B7:74275147C32925B0C4924AB5C7E083C3): found (228 ms) by ***Italia - Disney Junior
2013/12/06 01:50:14 975E268 c Vittorio (09CD&000000/046C/2B7C/B7:6275127EA4ED35344A2C8A2F2F6293A6): found (228 ms) by ***Italia - Disney Junior
2013/12/06 01:50:24 975E268 c Vittorio (09CD&000000/046C/2B7C/B7:31879A6380B0D2D57E83E35A50359452): found (228 ms) by ***Italia - Disney Junior
2013/12/06 01:50:34 975E268 c Vittorio (09CD&000000/046C/2B7C/B7:E4FAFBDC8234D0BB3285089B127FDAE0): found (229 ms) by ***Italia - Disney Junior

but on my solo2 it's all black with 3Ccam or Mgcamd (the oscam recognize mgcamd as 3Ccam).
So I try to reinstall my xubuntu but it's the same.
It's my beginner opinion that the problem is on my 2 receiver cam or config.

:23_002:

I'm using oscam to give the C line to cccam clients

I better explain my situation:
I've successfully used oscam sharing C line to my 2 cccam receiver (Vu+ Solo2 and DM800HD) for 8 months without any problem.
Then I upgrade my linux xubuntu x64 server with new CPU MOBO and RAM.
I backup my config files and my oscam program and when i replace into new xubuntu doesn't work.
So I upgrade oscam to latest version ( oscam-svn9072-x86_64-pc-linux-webif-Distribution.tar.gz ) and the result was that the oscam show the cccam request and reply (slowly) but the client show no video.
I try all the variations you suggested without results.

I'm planning to start again with new config files from zero.

Could anyone help me to reconfigure all ?
:06:

Hi all, i've made in these days some test and I notice that if I use the Vu Solo2 for sharing the card with the Oscam package of the RRPlugin it works perfectly but not if I use the same config in my triple reader linux system.
I also notice that the ecm time using the Vu solo2 as server are about 400ms on my DM800HD Client !!!

I have no idea why it works and why the ecm time are so high!

The Vu solo2 config:

OSCAM.CONF
# oscam.conf generated automatically by Streamboard OSCAM 0.99.4svn build #2925
# Read more: http://streamboard.gmc.to/osca…on/doc/txt/oscam.conf.txt

[global]
logfile = /dev/null
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0

[newcamd]
port = xxxxx@09CD:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[dvbapi]
enabled = 1
au = 0
boxtype = none
user =
pmt_mode = 0

[webif]
httpport = 16002
httpuser = xxxxx
httppwd = xxxxx
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0

OSCAM.USER
oscam.user generated automatically by Streamboard OSCAM 0.99.4svn build #2925
# Read more: http://streamboard.gmc.to/osca…on/doc/txt/oscam.user.txt

[account]
user = xxxxx
pwd = xxxxx
disabled = 0
expdate =
group = 1
hostname = 127.0.0.1
uniq = 1
sleep = 0
monlevel = 0
au = 1
services =
caid = 09CD
betatunnel =
ident = 09CD:000000
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

OSCAM.SERVER
[reader]
label = ***IT
protocol = internal
device = /dev/sci0
Detect = CD
Fallback = 0
group = 1
CAID = 09CD
ident: = 09CD:000000
boxid = 12345678
mhz = 357
cardmhz = 357
emmcache = 1,3,2
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
blocknano = all
blockemm-bylen = 183,81

I check the DM800 config and i correct some problem so my ecm are about 85ms.

It still remains to solve why the oscam doesn't work on my linux server :72: