can you use mgcamd on HDMU?

can you use mgcamd on HDMU? im trying ever so hard to get this to work. I've put the HDMU softcam control.pyo in to /usr/lib/enigma2/python I'm guessing it goes there because there are other pyo files there.

i'm pretty sure my mg_camd is configured correctly. may someone point me in the right direction please? Using Amniko ALIEN 8900 flashed with the following HDMU_11361_E2_spark_211_git_5519_nodebug_gst_Flash. Another thing I've noticed which shouldn't really be an issue is that the network test shows the IP Address as unconfirmed. I know its working as I can ftp to the box and I can access their plugins list on their server but keep coming across okpg needs to be updated? spark side works fine with mg_camd.

Someone please help

Thanks

Quote from fyusuf1

can you use mgcamd on HDMU? im trying ever so hard to get this to work. I've put the HDMU softcam control.pyo in to /usr/lib/enigma2/python I'm guessing it goes there because there are other pyo files there.

i'm pretty sure my mg_camd is configured correctly. may someone point me in the right direction please? Using Amniko ALIEN 8900 flashed with the following HDMU_11361_E2_spark_211_git_5519_nodebug_gst_Flash. Another thing I've noticed which shouldn't really be an issue is that the network test shows the IP Address as unconfirmed. I know its working as I can ftp to the box and I can access their plugins list on their server but keep coming across okpg needs to be updated? spark side works fine with mg_camd.

Someone please help

Thanks

Display More

Would like to add, softcam menu within HDMU I can only click the blue button. the softcam is never active :| I can add pics if that helps?

cd96e2c6.jpg2992037c800a2bbc01577dbac.jpg

Quote from fyusuf1

Would like to add, softcam menu within HDMU I can only click the blue button. the softcam is never active :| I can add pics if that helps?

Here is how my camd is set:

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 03 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 02 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 01 } root newcs

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
ff878.jpg

hope this helps?

Is your network test showing up all fine? my IP address keeps showing unconfirmed. I am even now connecting directly with router. was using power plugs before. I'm stumped. may give the image version you mentioned a try. I haven't got anything but FTA working.

Quote from fyusuf1

Is your network test showing up all fine? my IP address keeps showing unconfirmed. I am even now connecting directly with router. was using power plugs before. I'm stumped. may give the image version you mentioned a try. I haven't got anything but FTA working.

I know internet is working because it's telling me there are two updates available :|

I really think its a bug on the image now. I am that convinced.

where did you grab the HDMU 11482 image from? I've installed the 11361...the bane of my life! haha.

It turned out to be the image..tried khans image...network connection was fine, trasferred over oscam. all worked a treat.. 2 whole days wasted on the HDMU 11361 build...i just went along with the poll and doubted my own abilities because the poll suggested HDMU is one of the most stable images out there. Maybe i'll give Build 11482 a go...but not anytime soon. Managed to mess up the spark side of things think i need to add the cam configurations again as adding the plugin pack overwrote everything that was on there already which needs to be imporved.

Thanks Puma, it was your comments which edged me to try an alternative image.