help needed here to get oscam to read the card

2011/05/03 20:31:40 B74EBB70 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/05/03 20:31:40 B74EBB70 r recompile with SmartReader support.
2011/05/03 20:31:40 B74EBB70 r Cannot open device: 002:004
2011/05/03 20:31:55 B74BEB70 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/05/03 20:31:55 B74BEB70 r recompile with SmartReader support.
2011/05/03 20:31:55 B74BEB70 r Cannot open device: 004:002 ------ you will have to change this.goto part 11.
2011/05/03 20:32:18 0 exit with signal 15
2011/05/03 20:32:18 B74EBB70 r exit with signal 15
2011/05/03 20:32:18 B74EBB70 r thread B74EBB70 ended!
2011/05/03 20:32:18 B74EBB70 r ERROR ICC_Async_Close: unknow reader type 7

Here is my oscam.server log
[reader]
label = ***uk
protocol = smartreader
detect = cd
device = 002:004
emmcache = 1,3,2
caid = 0963
boxid = xx xx xx xx
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
mhz = 600
cardmhz = 600
ident = 0963:000000
group = 1

I have a smartreader usb card reader and its coming in on the 002:004 ...
Am new at this and it cracking me up..
Have it running on a Ubuntu server
Any help would be brill

hi
DId as you said and many thanks
Restarted the oscam and here is some of the errors i am getting...
I am using Ubuntu 10.4
Some learning curve this.. Thanks a million for the previous bit of help

2011/05/03 22:22:31 B75E56C0 s newcamd: Bind request failed, waiting another 9 seconds
2011/05/03 22:22:32 B75E56C0 s newcamd: Bind request failed, waiting another 8 seconds
2011/05/03 22:22:33 B75E56C0 s newcamd: Bind request failed, waiting another 7 seconds
2011/05/03 22:22:34 B75E56C0 s newcamd: Bind request failed, waiting another 6 seconds
2011/05/03 22:22:35 B75E56C0 s newcamd: Bind request failed, waiting another 5 seconds
2011/05/03 22:22:36 B75E56C0 s newcamd: Bind request failed, waiting another 4 seconds
2011/05/03 22:22:37 B75E56C0 s newcamd: Bind request failed, waiting another 3 seconds
2011/05/03 22:22:38 B73EEB70 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/05/03 22:22:38 B73EEB70 r recompile with SmartReader support.
2011/05/03 22:22:38 B73EEB70 r Cannot open device: 002:005
2011/05/03 22:22:38 B75E56C0 s newcamd: Bind request failed, waiting another 2 seconds
2011/05/03 22:22:39 B75E56C0 s newcamd: Bind request failed, waiting another 1 seconds
2011/05/03 22:22:40 B75E56C0 s newcamd: Bind request failed, giving up
2011/05/03 22:22:40 B75E56C0 s radegast: disabled
2011/05/03 22:22:40 B75E56C0 s http thread started
2011/05/03 22:22:40 B75E56C0 s creating thread for device 002:005
2011/05/03 22:22:40 B75E4280 h HTTP Server couldn't bind on port 8888 (errno=98 Address already in use). Not starting HTTP!
2011/05/03 22:22:40 B75E56C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/05/03 22:22:40 B75E56C0 s waiting for local card init
2011/05/03 22:22:40 B75C9B70 r reader thread started (thread=B75C9B70, label=***uk, device=002:005, detect=cd, mhz=600, cardmhz=600)
2011/05/03 22:22:40 B75C9B70 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/05/03 22:22:40 B75C9B70 r recompile with SmartReader support.
2011/05/03 22:22:40 B75C9B70 r Cannot open device: 002:005
2011/05/03 22:23:38 B73EEB70 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/05/03 22:23:38 B73EEB70 r recompile with SmartReader support.
2011/05/03 22:23:38 B73EEB70 r Cannot open device: 002:005
2011/05/03 22:23:40 B75C9B70 r ERROR, you have specified 'protocol = smartreader' in oscam.server,

i have done all that now ... Checked it all out and restarted the oscam... No errors thank god...Checked the log.. More reading to be done... Thanks a million. Great help

do you know much about the cccam.cfg setup.. I put in the N line for it to connect into the oscam.server file with the port 15000 open in each...
I then put in the F line for me to connect my dreambox 500 and changed the file C line to see the F line on the server....
Do i need to fill in anymore stuff... Just picked this cccam.cfg file off the web as an example...

I know this is a example for a dreambox and if you could point me in the right direction it would be brill

SERVER LISTEN PORT : 12000
WEBINFO USERNAME : root
WEBINFO PASSWORD : dreambox
TELNETINFO USERNAME : root
TELNETINFO PASSWORD : dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 3
OSD USERNAME : root
OSD PASSWORD : dreambox
OSD PORT : 80
SHOW TIMING : yes
MINI OSD : yes
DEBUG : yes
NEWCAMD CONF : yes
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
#SOFTKEY FILE : /var/keys/SoftCam.Key
#AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
MINIMUM CLIENT VERSION : 1.7.0
MINIMUM DOWNHOPS: 1

Is this correct as i am just a beginner

root@ubuntu:~# tail -f /var/log/oscam.log
2011/05/04 14:57:27 B73FF6C0 s newcamd: initialized (fd=8, port=150000, crypted)
2011/05/04 14:57:27 B73FF6C0 s CAID: 096C
2011/05/04 14:57:27 B73FF6C0 s provid #0: 000000
2011/05/04 14:57:27 B73FF6C0 s radegast: disabled
2011/05/04 14:57:27 B73FF6C0 s http thread started
2011/05/04 14:57:27 B73FF6C0 s creating thread for device /dev/ttyUSB0
2011/05/04 14:57:27 B73FE280 h HTTP Server listening on port 8888
2011/05/04 14:57:27 B73FF6C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/05/04 14:57:27 B73FF6C0 s waiting for local card init
2011/05/04 14:57:27 B73E3B70 r reader thread started (thread=B73E3B70, label=slyuk, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2011/05/04 14:57:31 B73FF6C0 s init for all local cards done
2011/05/04 14:57:31 B73FF6C0 s anti cascading disabled

Thanks

hi again
This is driving me mental

here is my oscam file
2011/05/04 19:51:33 B75256C0 s newcamd: Bind request failed, waiting another 3 seconds
2011/05/04 19:51:34 B75256C0 s newcamd: Bind request failed, waiting another 2 seconds
2011/05/04 19:51:35 B6CFC280 c client connected to 10000 port
2011/05/04 19:51:35 B75256C0 s newcamd: Bind request failed, waiting another 1 seconds
2011/05/04 19:51:35 B6CFC280 c user test1 is trying to connect but doesnt exist ! (CCcam)
2011/05/04 19:51:35 B6CFC280 c plain newcamd-client 127.0.0.1 rejected (no such user)
2011/05/04 19:51:35 B6CFC280 c thread B6CFC280 ended!
2011/05/04 19:51:36 B75256C0 s newcamd: Bind request failed, giving up
2011/05/04 19:51:36 B75256C0 s radegast: disabled
2011/05/04 19:51:36 B75256C0 s http thread started
2011/05/04 19:51:36 B75256C0 s creating thread for device /dev/ttyUSB0
2011/05/04 19:51:36 B7524280 h HTTP Server couldn't bind on port 8888 (errno=98 Address already in use). Not starting HTTP!
2011/05/04 19:51:36 B75256C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/05/04 19:51:36 B75256C0 s waiting for local card init
2011/05/04 19:51:36 B73FFB70 r reader thread started (thread=B73FFB70, label=***uk, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/05/04 19:51:38 B6CFC280 c client connected to 10000 port
2011/05/04 19:51:39 B75256C0 s init for all local cards done
2011/05/04 19:51:39 B75256C0 s anti cascading disabled
2011/05/04 19:51:43 B6CFC280 c Connection closed to client
2011/05/04 19:51:43 B6CFC280 c thread B6CFC280 ended!
2011/05/04 19:51:45 B6CFC280 c client connected to 10000 port
2011/05/04 19:51:45 B6CFC280 c user test1 is trying to connect but doesnt exist ! (CCcam)
2011/05/04 19:51:45 B6CFC280 c plain newcamd-client 127.0.0.1 rejected (no such user)
2011/05/04 19:51:45 B6CFC280 c thread B6CFC280 ended!
2011/05/04 19:51:53 B6CFC280 c client connected to 10000 port
2011/05/04 19:51:56 B7511280 c client connected to 10000 port
2011/05/04 19:51:56 B7511280 c user test1 is trying to connect but doesnt exist ! (CCcam)
2011/05/04 19:51:56 B7511280 c plain newcamd-client 127.0.0.1 rejected (no such user)
2011/05/04 19:51:56 B7511280 c thread B7511280 ended!
2011/05/04 19:51:58 B6CFC280 c Connection closed to client
2011/05/04 19:51:58 B6CFC280 c thread B6CFC280 ended!
2011/05/04 19:52:06 B6CFC280 c client connected to 10000 port
2011/05/04 19:52:06 B6CFC280 c user test1 is trying to connect but doesnt exist ! (CCcam)
2011/05/04 19:52:06 B6CFC280 c plain newcamd-client 127.0.0.1 rejected (no such user)
2011/05/04 19:52:06 B6CFC280 c thread B6CFC280 ended!

What am i doing wrong... I think all the ports are set right

Here is my CCcam.cfg file

N: 127.0.0.1 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14

f: password password

SERIAL READER : /dev/ttyUSB0 smartreader+
BOXKEY: /dev/ttyUSB0 xxxxxxxx
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000

SERVER LISTEN PORT : 10000

Here is my oscam.conf

[global]

nice = -1

WaitForCards = 1

pidfile = /var/run/oscam.pid

logfile = /var/log/oscam.log

usrfile = /var/log/oscamuser.log

cwlogdir = /var/log/cw

maxlogsize = 10000

[newcamd]

port = 10000@096C:000000

key = 0102030405060708091011121314

[webif]

httpport = 8888

httpuser = user

httppwd = pass

httprefresh = 0

httpallowed = 127.0.0.1,192.168.1.1-192.168.1.254

httphideidleclients = 0

httpreadonly = 0

Here is my oscam.server file

[reader]
label = ***uk
protocol = mouse
detect = cd
device = /dev/ttyUSB0
emmcache = 1,3,2
caid = 0963
boxid = xxxxxxxx all have been kept together
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
mhz = 357
cardmhz = 357
ident = 0963:000000
group = 1

And finally my oscam.user file

user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1,2
au = s*yuk
caid = 0963

user = password
pwd = password
monlevel = 0
uniq = 0
group = 1,2
au = s*yuk
caid - 0963

On my dreambox inside at home i have put

C: my ip 10000 password password

Everything i try is taking me under...

I am using a Ubuntu Server and never touched Linux in my life up until a week ago... Massive setup.. But this is really cracking me up
Any help would be really helpfull