Hi, I have AutoBouquets E2 (Version:20/10/13) and it is set to Grampain HD as area.
Firstly I do not seem to get getting the correct channel listing for Grampain. It seems to give me UTV instead of STV and also 117 which was STV HD seems to also now be missing.
In addition to this the auto update is set for 0300H every morning and causes the system to crash. Below is the crash log. Can anyone advise how to resolve both these issues?
Thanks
XML
<?xml version="1.0" encoding="utf-8"?>
<opendreambox>
<enigma2>
<crashdate>Sat Dec 14 03:22:52 2013</crashdate>
<compiledate>Nov 15 2013</compiledate>
<contactemail>crashlog</contactemail>
<!-- Please email this crashlog to above address -->
<skin>skin.xml</skin>
<sourcedate>2013-11-15</sourcedate>
<branch>master</branch>
<rev>0751e0d</rev>
<version>3.0.0</version>
</enigma2>
<image>
<dreamboxmodel>dm8000</dreamboxmodel>
<kernelcmdline>bmem=112M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
version=1000201310251647
]]>
</imageversion>
<imageissue>
<![CDATA[
BlackHole 2.0.7 %h
]]>
</imageissue>
</image>
<software>
<enigma2software>
<!-- Cannot allocate memory -->
</enigma2software>
<dreamboxsoftware>
<!-- Cannot allocate memory -->
</dreamboxsoftware>
<gstreamersoftware>
<!-- Cannot allocate memory -->
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<![CDATA[
SEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f3
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12560000 Pol 0 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1960 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f3
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12560000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1960 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 1
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12603000 Pol 1 SR 3095000 INV 2 FEC 0 orbpos 282 system 1 modulation 1 pilot 2, rolloff 0
no valid fec for DVB-S2 set.. abort !!
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12607000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2007 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12607000 Pol 0 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2007 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 2
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f3
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 6401936 bytes for cache used
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12643000 Pol 0 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2043 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f3
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12643000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2043 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 1
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12685000 Pol 1 SR 7200000 INV 2 FEC 8 orbpos 282 system 1 modulation 1 pilot 2, rolloff 0
tuning to 2085 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 20000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
It's now Sat Dec 14 03:20:22 2013
[timer.py] next activation: 1386991322 (in 99998 ms)
It's now Sat Dec 14 03:20:40 2013
next real activation is Sat Dec 14 19:58:40 2013
[timer.py] next activation: 1386991340 (in 99998 ms)
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12704000 Pol 1 SR 6111000 INV 2 FEC 3 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2104 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 20000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12713000 Pol 1 SR 3300000 INV 2 FEC 5 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2113 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 20000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 6401936 bytes for cache used
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12720000 Pol 1 SR 3300000 INV 2 FEC 5 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2120 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 20000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12731000 Pol 1 SR 6666000 INV 2 FEC 5 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2131 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 20000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
It's now Sat Dec 14 03:22:02 2013
[timer.py] next activation: 1386991422 (in 99998 ms)
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12734000 Pol 0 SR 2963000 INV 2 FEC 3 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2134 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 2
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f3
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 20000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 6401918 bytes for cache used
It's now Sat Dec 14 03:22:20 2013
next real activation is Sat Dec 14 19:58:40 2013
[timer.py] next activation: 1386991440 (in 99997 ms)
OURSTATE: failed
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12740000 Pol 1 SR 6111000 INV 2 FEC 3 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2140 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 1
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 20000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
OURSTATE: failed
no channels left to scan.
78 channels scanned, 37 were unavailable.
78 channels in database.
remove 011a0000 0002 07d1
remove 011a0000 0002 07d3
remove 011a0000 0002 07d4
remove 011a0000 0002 07d5
remove 011a0000 0002 07d6
remove 011a0000 0002 07d7
remove 011a0000 0002 07d8
remove 011a0000 0002 07d9
remove 011a0000 0002 07da
remove 011a0000 0002 07db
remove 011a0000 0002 07dc
remove 011a0000 0002 07df
remove 011a0000 0002 07e0
remove 011a0000 0002 07e1
remove 011a0000 0002 07e2
remove 011a0000 0002 07e4
remove 011a0000 0002 07e5
remove 011a0000 0002 07e7
remove 011a0000 0002 07e8
remove 011a0000 0002 07e9
remove 011a0000 0002 07ea
remove 011a0000 0002 07eb
remove 011a0000 0002 07ec
remove 011a0000 0002 07ed
remove 011a0000 0002 07ee
remove 011a0000 0002 07ef
remove 011a0000 0002 07f0
remove 011a0000 0002 07f1
remove 011a0000 0002 07f2
remove 011a0000 0002 07f3
remove 011a0000 0002 07f4
remove 011a0000 0002 07f7
remove 011a0000 0002 07f8
remove 011a0000 0002 07f9
remove 011a0000 0002 07fa
remove 011a0000 0002 07fb
remove 011a0000 0002 07fc
remove 011a0000 0002 07fd
remove 011a0000 0002 07fe
remove 011a0000 0002 07ff
remove 011a0000 0002 0800
remove 011a0000 0002 0801
remove 011a0000 0002 0802
remove 011a0000 0002 0803
remove 011a0000 0002 0804
remove 011a0000 0002 0805
remove 011a0000 0002 0806
remove 011a0000 0002 0807
remove 011a0000 0002 0808
remove 011a0000 0002 0809
remove 011a0000 0002 080d
remove 011a0000 0002 080f
remove 011a0000 0002 0814
remove 011a0000 0002 0819
remove 011a0000 0002 081a
remove 011a0000 0002 081b
remove 011a0000 0002 081c
remove 011a0000 0002 081d
remove 011a0000 0002 081e
remove 011a0000 0002 081f
remove 011a0000 0002 0820
remove 011a0000 0002 0821
remove 011a0000 0002 0822
remove 011a0000 0002 0823
remove 011a0000 0002 0824
remove 011a0000 0002 08fd
remove 011a0000 0002 08fe
remove 011a0000 0002 08ff
remove 011a0000 0002 0900
remove 011a0000 0002 0902
remove 011a0000 0002 0907
remove 011a0000 0002 0908
remove 011a0000 0002 0909
remove 011a0000 0002 090a
remove 011a0000 0002 090b
remove 011a0000 0002 090c
remove 011a0000 003b 090b
remove 011a2f26 0002 07e3
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- saving lame channel db
saved 78 channels and 955 services!
scan done!
playing service..
start release channel timer
not pauseable.
RemovePopup, id = ZapError
(found in current notifications)
[eDVBCAService] remove channel 0x317e4a0
[eDVBLocalTimerHandler] remove channel 0x317e4a0
[eEPGCache] remove channel 0x317e4a0
allocate channel.. 0814:0002
[eDVBCAService] new channel 0x724d10b0!
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11126500 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1376 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:52D0:814:2:11A0000:0:0:0::104 = Channel 4 HD
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
[AutoBouquets] fallback to default translation for AutoBouquets E2 for 28.2E
[AutoBouquets] script will first initialize your system!
[AutoBouquets] fallback to default translation for AutoBouquets E2 for 28.2E
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 201, in processDelay
callback(*retval)
File "/usr/lib/enigma2/python/Plugins/Extensions/AutoBouquets/plugin.py", line 660, in finished_cb
self.go()
File "/usr/lib/enigma2/python/Plugins/Extensions/AutoBouquets/plugin.py", line 686, in go
self.doScan()
File "/usr/lib/enigma2/python/Plugins/Extensions/AutoBouquets/plugin.py", line 723, in doScan
self.shcom(com)
File "/usr/lib/enigma2/python/Plugins/Extensions/AutoBouquets/plugin.py", line 727, in shcom
self.session.openWithCallback(self.scancomplete,Console,_("AutoBouquets E2 for 28.2E"), ['%s' % com], closeOnSuccess=True)
File "/usr/lib/enigma2/python/mytest.py", line 302, in openWithCallback
dlg = self.open(screen, *arguments, **kwargs)
File "/usr/lib/enigma2/python/mytest.py", line 308, in open
raise RuntimeError("modal open are allowed only from a screen which is modal!")
RuntimeError: modal open are allowed only from a screen which is modal!
(PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0x1fc52d8>>,()) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
]]>
</enigma2crashlog>
<pythonMD5sum>
<!-- Cannot allocate memory -->
</pythonMD5sum>
</crashlogs>
</opendreambox>
