Mgcamd + Oscam sky uk

Ok I tried the above and I'm not having any luck, here are my settings:

global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[newcamd]
port = 21000@0963:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1

[cccam]
port = #####
version = 2.2.1
reshare = 1

[webif]
httpport =
httpuser =
httppwd =
httprefresh = 15
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255

[monitor]
appendchaninfo = 1

###########################################################################

[reader]
label = UK
protocol = Mouse
device = /dev/ttyUSB0
emmcache = 1,3,2
group = 1
caid = 0963
ident = 0963:000000

###################################################################

[account]
user = Mon######
pass = May~~~~~~
group = 1
caid = 0963
ident = 0963:000000
au = UK

###########################################################################

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 03 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

######################################################################

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = Ubuntu IP here 34001 Mon##### May~~~~~~ 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs

############################################################################

Where am I going wrong please?

Does everything else look ok? Changed the 00 to 06, still no luck, picture not clearing. I'm assuming I use mgcamd 1.35 as the softcam on my receiver then too?

What about the DVB=Api? Do I need to add that anywhere? If so how?

Unfortunately still no luck, made the above changes and it's still not clearing. :-(
I don't need to open any ports do I as was mentioned earlier. Wonder what it is?

Ok I get the entitlements bit under reader, I know how to check that, not sure where and how to add an Nline...not done that before on Oscam

I replaced the CWS line with the N: as shown above

Still not clearing...

No errors in the log and shows me as offline

Done the above but no mgcamd.log in that folder. It's not in there. I don't think the softcam is running? no log.

Should I try deleting old softcams off the receiver? I use to run oscam and cccam on my receiver before I switched to Ubuntu, old files still on the receiver?

Deleted Oscam files, deleted the softcam. Mgcamd still not clearing channels. Would you like me to send all files or specific files again?

Do I need the ECMwhitelist in the reader section? Also the boxid? I honestly have done everything that you said in this thread. I have an option to d/l mgcamd with newcs softcam, not the latest mgcamd softcam you said, thats not in the list mate. my newcamd list looks like this:

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
N: 192.168.1.112 34001 Mon#### May###### 01 02 03 04 05 06 07 08 09 10 11 12 13 14

my oscam.server file looks like this :
global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[newcamd]
port = 34001@0963:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1

[cccam]
port = #####
version = 2.2.1
reshare = 1

[webif]
httpport =
httpuser =
httppwd =
httprefresh = 15
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255

[monitor]
appendchaninfo = 1

Ok so I used exactly the same files you posted, saw this in the oscam log, not sure what it means, but looks interesting ...
2012/05/26 01:35:15 9265378 r reader: uk ecm: 9197 real time: 109 ms
2012/05/26 01:35:15 9265378 r add client job action 24
2012/05/26 01:35:15 B7504F40 c poll wakeup
2012/05/26 01:35:15 B7504F40 c ecm answer from reader uk for ecm 9197 rc=0
2012/05/26 01:35:15 9265378 r ending thread
2012/05/26 01:46:59 B7504F40 c request_cw stage=2 to reader uk ecm=88F1
2012/05/26 01:46:59 B7504F40 c start reader thread action 5
2012/05/26 01:46:59 9265378 r data from add_job action=5 client r uk
2012/05/26 01:46:59 9265378 r ecm:
2012/05/26 01:46:59 9265378 80 70 5F 00 00 01 11 B8 1A 05 DD FF FF 00 81 01
2012/05/26 01:46:59 9265378 21 20 01 00 01 00 00 89 49 7E 0A 40 4C 86 EA B8
2012/05/26 01:46:59 9265378 A7 76 88 32 51 90 3B C0 04 1C 73 A0 BD B5 F1 D4
2012/05/26 01:46:59 9265378 45 A3 6A F1 CD 58 97 80 73 51 BF B3 5A 94 90 E3
2012/05/26 01:46:59 9265378 C6 B8 1C 6A B4 BF 30 29 38 F4 99 03 39 F0 A4 6F
2012/05/26 01:46:59 9265378 60 F1 AF 7C 38 85 08 17 D3 55 24 2E 18 D7 2B 1C
2012/05/26 01:46:59 9265378 77 B2
2012/05/26 01:46:59 9265378 r reader: uk ecm: 88F1 real time: 107 ms
2012/05/26 01:46:59 9265378 r add client job action 24

Mgcamd on my receiver not clearing channels...the log on the receiver mgstatinfo shows this:

Sat May 26 01:47:40 2012
mg uptime 4529d 00h 46m 05s, service changes: 1, ecm processed: 0, lost cw warnings: 0

Newcamd:
Host/port Recon. Emm out Ecm out Cw in Avg. ecm time
192.168.1.112 :34001 0 0 0 0 0

Box: uptime = 960s, CPU load: 1 min 7232 / 5 min 7200 / 15 min 8960
RAM in bytes: total 148824064 / free 56147968 / shared 0 / buffers = 159744
mgcamd: total memory allocated by malloc, in bytes: 135168 (132kb), chunks 8552

Hope this helps mate, off to bed now, try again in the morning :-(