card reader error

There are 4 replies in this Thread which was already clicked 892 times. The last Post () by okverd.

  • hi guys,


    do these errors mean that there is something wrong with my viewing card or is it that my card reader is not configured correct??


    Reader slyuk restarted by WebIF from 192.168.1.72
    2014/02/12 22:38:56 B7103690 r slyuk [mouse] Error activating card.
    2014/02/12 22:38:57 B7103690 r slyuk [mouse] card initializing error
    2014/02/12 22:38:58 B7103690 r slyuk [mouse] creating thread for device /dev/ttyUSB0
    2014/02/12 22:38:58 B7100D00 r slyuk [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
    2014/02/12 22:38:58 B7100D00 r slyuk [mouse] card detected
    2014/02/12 22:39:02 B7100D00 r slyuk [mouse] Error activating card.
    2014/02/12 22:39:10 0 --- Skipped 2 duplicated log lines ---
    2014/02/12 22:39:10 B7100D00 r slyuk [mouse] card initializing error



    any help much appreciated

  • the setup is a linus server i followd that fellows tut on that and it worked a treat am now having problems with the card reader its a TBS3102 5 Crystal Phoenix/Smartmouse Card Reader, i can make changes to the config of the reader through oscam but what ever settings i do i have no look


    any ideas would be appreciated


    thanks

  • I would buy a reader who no doubt works. I bought a Smago and it worked immediately.
    Otherwise, try to compare your files with those in the thread I link to, and / or post your own.

  • Im using same 4x smartmouse/Phenix readers last 3 years.
    First you need to manualy change settings - the 4 switches on the reader:
    switch 1: 3.3V
    switch 2: Phoenix
    switch 3: -->
    switch : Y5
    =
    Use this best card settings for 0963:
    protocol = mouse
    device = /dev/ttyUSB0
    autospeed = 0
    detect = cd
    mhz = 1200
    cardmhz = 357

    Edited once, last by okverd ().

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!