almost there a few issues

Hi guys have spent the last few days wrestling with OScam on a debian server with smargo and am nearly there. I have it up and running and the web i/f working it sees my card and entitlements. I used the oscam configs for all packages section and used the oscam sly uk configs updating entitlements config. I have added the N: line in the CCcam config on my dreambox but am getting errors in the web i/f This is what I get....

2011/07/19 10:57:01 9CF0808 c client connected to 15366 port
2011/07/19 10:57:06 9CF0808 c WARNING: invalid client tcp_conn_close()
2011/07/19 10:57:06 9CF0808 c anonymous disconnected from 192.168.0.11
2011/07/19 10:57:06 9CF0808 c thread B7549B70 ended!
2011/07/19 10:57:15 9CF0808 c client connected to 15366 port
2011/07/19 10:57:20 9CF0808 c WARNING: invalid client tcp_conn_close()
2011/07/19 10:57:20 9CF0808 c anonymous disconnected from 192.168.0.11
2011/07/19 10:57:20 9CF0808 c thread B7549B70 ended!

Can anybody give me some pointers please. I can post config files if needed. One other question I have come across a OScam services file is this needed as I never see it in any of the configs If it is are there any examples to use.I have it sitting in my usr/local/etc along with my other three config files. Again cheers guys. Hope I can crack it today

yep done that new can I post my files here for you to look at for me I will obviously edit the important bits

Thanks for looking New

Oscam config
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols

[newcamd]
key = 0102030405060708091011121314
port = 15366@0963:000000;10001@0963:000000

Oscam server

[reader]
label = *** UK
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 0963:000000
# 0963 is *** UK.
boxid = ********
# Oscam can read a *** card i.d, but you can also put this
# in manually
detect = cd
cardmhz = 357
# this helps the card run more smootly
group = 1
# Oscam has the concept of groups. Only users in group 1 can
# use this reader. I'm only using one group.
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-g = 1
# these ensure smooth decrypting
lb_weight = 101
# for load balancing - can be commented out.

Oscam user

account]
user = dreambox1
description = for local mgcamd or DVBAPI
pwd = lounge
disabled = 0
uniq = 1
group = 1
au = lower card
caid = 0963:000000

N line in dreambox cccam.cfg

N: 127.0.0.1 15366 dreambox1 lounge 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

ok New,
Sorry about delay vermin media woz on phone for my "not so super hub" kicking them into touch next week and going bt infinity. Never has worked properly since april. Anyway the bracket woz a cut and paste error on my part but I updated the other entry to show the same as server as suggested. stopped and restarted oscam dreambox still offline

PS oh and added # to the line u suggested

Thanks ten Below just cut and pasted it. from config files I will engage brain next time will change it and give it a go cheers

Whooopeee! this forum is the dogs!! I have sly movies on one dm800. Ok just need to setup the accounts for the others so each user account needs a separate N line in cccam I assume. I then need to read up on card updating as it just happened on cccam not sure on this so need to get mind around that.
Again thanks to all that helped on my server setup and oscam setup. It pays to poke around as I have a much better understanding of oscam now

All up and running