Help needed Set Up nearly there Ubuntu/CCcam/smargo

There are 16 replies in this Thread which was already clicked 1,091 times. The last Post () by dabdig.

  • I decided to stop asking for help and do more reding but have now come unstuck


    I have Ubuntu server CCcam Oscam 2_1.3 Smargo reader with white Sxx card 1 internal box connected to bedroom everything seems okay but cannot view channels in bedroom


    Any help with this would be appreciated


    Thanks


    CONFIGURATION


    ==============================================


    CCcam.cfg reads ----->


    SERVER LISTEN PORT : 12000
    ALLOW TELNETINFO: yes
    ALLOW WEBINFO: yes
    WEBINFO USERNAME :admin
    WEBINFO PASSWORD :admin
    TELNETINFO USERNAME :root
    TELNETINFO PASSWORD :dreambox
    TELNETINFO LISTEN PORT : 16000
    WEBINFO LISTEN PORT : 16001
    ZAP OSD TIME :0
    OSD USERNAME :root
    OSD PASSWORD :dreambox
    OSD PORT :80
    SHOW TIMING : yes
    DEBUG : no
    NEWCAMD CONF : no
    SHOW EXTENEDED CLIENT INFO : yes
    MINI OSD : no
    SERIAL READER : /dev/ttyUSB0 smartreader+
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CAID PRIO FILE : /var/etc/CCcam.prio
    LOG WARNINGS : /tmp/warnings.txt
    SOFTKEY FILE : /var/keys/SoftCam.Key
    AUTOROLL FILE : /var/keys/AutoRoll.Key
    STATIC CW FILE : /var/keys/constant.cw
    BOXKEY: /dev/sci0 xx xx xx xx
    PIN : /dev/sci0 1234
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 4800000


    N: 127.0.0.1 10000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
    F: share1 bedroom 2 0 0 { 0:0:0, 0963:0:0, 0961:0:0 }


    ==============================


    CCcam Cline LINE on Bedroom OPENBOX S10 Updated with latest channel List


    C: 192.xxx.x.xxx 12000 share1 xxxxxxx



    ==============================



    In CCcam webinfo



    Welcome to CCcam 2.1.3 server


    Current time 10:02:11
    NodeID: dbbfb18bca73c7ef
    Uptime: 00d 00:05:56
    Connected clients: 1
    Active clients: 0
    Total handled client ecm's: 0
    Total handled client emm's: 0
    Peak load (max queued requests per workerthread):



    Active Clients



    Connected clients: 1
    0 ACTIVE CLIENTS IN LAST 20 SECONDS
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    | Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+


    +---------+---------------------------------------+
    | Username| Shareinfo |
    +---------+---------------------------------------+
    | share1| |
    +---------+---------------------------------------+



    Clents >


    Connected clients: 1
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    | Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
    |share1 |192.168.1.64 |00d 00:12:31|00d 00:12:31|0 (0)|0 (0)| 2.1.4 | | |
    +---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+


    +---------+---------------------------------------+
    | Username| Shareinfo |
    +---------+---------------------------------------+
    | share1| |
    +---------+---------------------------------------+


    Servers >


    Server connections: 1
    +----------------------+------------+-------+--------+----------------+-------+-------------------------------+
    | Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
    +----------------------+------------+-------+--------+----------------+-------+-------------------------------+
    |127.0.0.1:10000 |00d 00:14:46|newcamd| | | 1 | |
    +----------------------+------------+-------+--------+----------------+-------+-------------------------------+



    Shares >


    Available shares: 2


    +----------------------+------------+----+-------+----------+-------+-------+
    | Host | Type |Caid| System| Providers|Uphops | Nodes |
    | | | | | |Maxdown| |
    +----------------------+------------+----+-------+----------+-------+-------+
    |127.0.0.1:10000 |newcamd | 963|nds |0 |0 7 | |
    |/dev/ttyUSB0 |smartreader+| 963|nds |0 |0 11 | |
    +----------------------+------------+----+-------+----------+-------+-------+



    Providers >


    Available providers:


    +----+----------+--------------+-----+
    |Caid| Provider | Provider Name| System|
    +----+----------+--------------+-----+
    | 963| |xxx UK (28E) |nds |
    +----+----------+--------------+-----+



    Entitlements >


    card reader /dev/ttyUSB0
    handled 0(0) ecms and 0(0) emms
    Nds card xxxxxxx


    Entitlement info
    003 27-06-2014
    00b 27-06-2014
    0010 27-06-2014
    001d 27-06-2014
    0057 27-06-2014
    30e1 08-07-2014
    30e2 08-07-2014
    b732 27-06-2014
    b736 27-06-2014
    b765 27-06-2014
    b766 27-06-2014
    b772 27-06-2014
    b773 27-06-2014
    b846 27-06-2014
    b848 27-06-2014
    b860 27-06-2014
    b8d2 27-06-2014
    b968 27-06-2014





    ====================================================




    In Oscam


    =====================================================



    oscam.cnfg


    [global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    preferlocalcards = 1
    saveinithistory = 1


    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = admin
    httpallowed = 127.0.0.1,192.168.0.0-192.168.254.254
    httprefresh = 15


    [newcamd]
    port = 10000@0963:000000
    key = 0102030405060708091011121314
    keepalive = 1
    ------------------------------------------------------


    oscam.server


    Blank


    ------------------------------------------------------


    oscam.server.bak


    Blank



    ------------------------------------------------------


    oscam.user


    [account]
    user = xxxxx
    pwd = xxxxx
    monlevel = 0
    uniq = 0
    group = 1,2
    au = 1


    -------------------------------------------------------

  • Quote

    I decided to stop asking for help and do more reding but have now come unstuck


    I have Ubuntu server CCcam Oscam 2_1.3 Smargo reader with white Sxx card 1 internal box connected to bedroom everything seems okay but cannot view channels in bedroom


    What is oscam doing in this setup if cccam is reading & sharing your card?


    A normal OScam/CCcam setup would have oscam reading card & sharing it to cccam which would be the server..


    From what you have posted, you could use a CCcam only setup..


    So before we start looking at your configs, decide what setup you want?


    CCcam only
    OScam only
    or
    OScam/CCcam


    I would recomend oscam only card reading server & cccam only on all the client box's




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

    Edited 2 times, last by thatfellow ().

  • I am trying to get oscam to read card server & use cccam on all my box's


    At the moment cccam webinfo is showing entitlements but when i go to readers on oscam webinfo it shows nothing unless i have below in oscam.server file


    [reader]
    label = ***uk
    protocol = smartreader
    detect = cd
    device = 003:002
    emmcache = 1,3,2
    caid = 0963
    boxid = xxxxxxxx
    blockemm-u = 0
    blockemm-s = 0
    blockemm-g = 1
    blockemm-unknown = 1
    mhz = 600
    cardmhz = 600
    ident = 0963:000000
    group = 1


    When i add text in Oscam.server 003 002 it stops showing entitlements is that normal ?
    it also says that ttyUSB0 not recognised or card not inserted

  • All you need to do is copy the configs from the oscam section and set the reader in oscam to the right device at the moment cccam is reading the card you'll find working configs for all packages then put your flies in cccam for each box you want setup , if you want to share external portforward a port of your choice on the router to your pc and register a dns account , can't help much more as at work on the phone hope this helps

  • dabdig


    There seems to be a lot of confusion here...


    You sound like you want both CCcam & OScam to read your card simultaneously?
    This cannot be done.
    You will have to choose one cam to be your card reader..


    When you make that choice, we will discuss configs & settings..




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

  • For oscam to read the card, try with these settings:


    oscam.server


    Check 003:002 by rinning lsusb from terminal
    No need for boxid for this card in oscam..



    then hash out these lines in cccam.cfg


    Code
    #SERIAL READER : /dev/ttyUSB0 smartreader+
    #BOXKEY: /dev/sci0 xx xx xx xx
    #PIN : /dev/sci0 1234
    #SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 4800000


    & restart server


    Also, has this card been paired to an official SlyUK box or is it a new Card?




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

    Edited once, last by thatfellow ().

    • Official Post

    Sorry getting a bit confused I would like oscam to read card


    Add the [reader] back into oscam.server.. This will allow oscam to read your card.. You don`t need boxid in this config either, oscam can read it without that parameter..



    Delete oscam.server.bak..


    Remove these lines from the CCcam.cfg..

    Code
    BOXKEY: /dev/sci0 xx xx xx xx
    PIN : /dev/sci0 1234
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 4800000


    Reboot your server, then check to see if everything is working..

  • Will give this a go Card is paired with HD box


    Did you do the new pairing where you had to ring Sly with Receiver ID, Box Serial number etc?
    If the answer to above question is no, how long have you had this card?


    TF




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

    • Official Post

    Hi


    Change settings on ccam.cfg and osacm.server but still not working


    Should I have entitlements in CCcam web info


    There won`t be entitlements in CCcam Info because oscam is cardreader..

    How To See Your Card Entitlements When Using Oscam


    We would need to see an oscam log from start up and after zapping some channels. Its likely your card has been paired that`s why you cannot use it outside of the official HD receiver.. Which make and model is the HD receiver ? When was the last time it was in this receiver ?

  • Reciever is DRX 890-C


    Model Number of box is xxxxxxxxxxxxxxxxxxxxxx


    Card has been in box all the time only out last couple of weeks when playing works fine in slybox



    OScam Log start up log Reads =======================================




    2014/05/13 18:18:09 8868908 r slyuk [smartreader] Calculated work ETU is 17.42 us reader mhz = 534
    2014/05/13 18:18:09 8868908 r slyuk [smartreader] autospeed = 1
    2014/05/13 18:18:09 8868908 r slyuk [smartreader] Effective reader settings mhz =534 F= 372 D= 4 N=2 T=0 inv=1 parity=ODD
    2014/05/13 18:18:09 8868908 r slyuk [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
    2014/05/13 18:18:11 8868908 r slyuk [smartreader] Card type: SYAV
    2014/05/13 18:18:11 8868908 r slyuk [smartreader] Rom version: 40LF
    2014/05/13 18:18:11 8868908 r slyuk [smartreader] Credit available on card: 35 euro
    2014/05/13 18:18:11 8868908 r slyuk [smartreader] Region Code: xxxx
    2014/05/13 18:18:12 8868908 r slyuk [smartreader] Pincode read: 1234
    2014/05/13 18:18:12 8868908 r slyuk [smartreader] PCB settings: FF FF FF 0
    2014/05/13 18:18:12 8868908 r slyuk [smartreader] type: ********** BslyB (0963), caid: 0963
    2014/05/13 18:18:12 8868908 r slyuk [smartreader] serial: ########, BoxID: ########, baseyear: 1997
    2014/05/13 18:18:12 8868908 r slyuk [smartreader] ready for requests
    2014/05/13 18:18:12 8868908 r slyuk [smartreader] found card system ***********
    2014/05/13 18:18:12 8868908 r slyuk [***********] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
    2014/05/13 18:18:12 8868908 r slyuk [***********] card detected
    2014/05/13 18:18:12 8868908 r slyuk [***********] type: ********** BslyB (0963)
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 0003, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 000b, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 0010, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 001d, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 0057, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 30e1, expiry date: 2014/07/08-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 30e2, expiry date: 2014/07/08-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b732, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b736, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b765, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b766, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b772, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b773, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b846, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b848, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b860, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b8d2, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b968, expiry date: 2014/06/27-01:00:00
    2014/05/13 18:18:19 0 s init for all local cards done
    2014/05/13 18:18:19 0 s anti cascading disabled
    2014/05/13 18:18:34 8889A70 c client connected to 10000 port
    2014/05/13 18:18:34 8889A70 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=auto (1 reader))
    2014/05/13 18:18:34 8889A70 c user cccam authenticated successfully (CCcam)
    2014/05/13 18:18:34 8889A70 c AU enabled for user cccam on reader slyuk

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!