Posts by dabdig

dabdig · May 13th 2014

will have a rummage in shed I think I Still have an old thomson HD box

dabdig · May 13th 2014

Reciever is DRX 890-C

Model Number of box is xxxxxxxxxxxxxxxxxxxxxx

Card has been in box all the time only out last couple of weeks when playing works fine in slybox

OScam Log start up log Reads =======================================

2014/05/13 18:18:09 8868908 r slyuk [smartreader] Calculated work ETU is 17.42 us reader mhz = 534
2014/05/13 18:18:09 8868908 r slyuk [smartreader] autospeed = 1
2014/05/13 18:18:09 8868908 r slyuk [smartreader] Effective reader settings mhz =534 F= 372 D= 4 N=2 T=0 inv=1 parity=ODD
2014/05/13 18:18:09 8868908 r slyuk [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/05/13 18:18:11 8868908 r slyuk [smartreader] Card type: SYAV
2014/05/13 18:18:11 8868908 r slyuk [smartreader] Rom version: 40LF
2014/05/13 18:18:11 8868908 r slyuk [smartreader] Credit available on card: 35 euro
2014/05/13 18:18:11 8868908 r slyuk [smartreader] Region Code: xxxx
2014/05/13 18:18:12 8868908 r slyuk [smartreader] Pincode read: 1234
2014/05/13 18:18:12 8868908 r slyuk [smartreader] PCB settings: FF FF FF 0
2014/05/13 18:18:12 8868908 r slyuk [smartreader] type: ********** BslyB (0963), caid: 0963
2014/05/13 18:18:12 8868908 r slyuk [smartreader] serial: ########, BoxID: ########, baseyear: 1997
2014/05/13 18:18:12 8868908 r slyuk [smartreader] ready for requests
2014/05/13 18:18:12 8868908 r slyuk [smartreader] found card system ***********
2014/05/13 18:18:12 8868908 r slyuk [***********] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/05/13 18:18:12 8868908 r slyuk [***********] card detected
2014/05/13 18:18:12 8868908 r slyuk [***********] type: ********** BslyB (0963)
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 0003, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 000b, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 0010, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 001d, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 0057, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 30e1, expiry date: 2014/07/08-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: 30e2, expiry date: 2014/07/08-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b732, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b736, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b765, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b766, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b772, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b773, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b846, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b848, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b860, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b8d2, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:12 8868908 r slyuk [***********] tier: b968, expiry date: 2014/06/27-01:00:00
2014/05/13 18:18:19 0 s init for all local cards done
2014/05/13 18:18:19 0 s anti cascading disabled
2014/05/13 18:18:34 8889A70 c client connected to 10000 port
2014/05/13 18:18:34 8889A70 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=auto (1 reader))
2014/05/13 18:18:34 8889A70 c user cccam authenticated successfully (CCcam)
2014/05/13 18:18:34 8889A70 c AU enabled for user cccam on reader slyuk

dabdig · May 13th 2014

Yes paired with box over phone sly sent me new box about 8 months ago had card about 2 years

dabdig · May 13th 2014

Hi

Change settings on ccam.cfg and osacm.server but still not working

Should I have entitlements in CCcam web info

dabdig · May 13th 2014

Will give this a go Card is paired with HD box

dabdig · May 13th 2014

Sorry getting a bit confused I would like oscam to read card

dabdig · May 13th 2014

I am trying to get oscam to read card server & use cccam on all my box's

At the moment cccam webinfo is showing entitlements but when i go to readers on oscam webinfo it shows nothing unless i have below in oscam.server file

[reader]
label = ***uk
protocol = smartreader
detect = cd
device = 003:002
emmcache = 1,3,2
caid = 0963
boxid = xxxxxxxx
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
mhz = 600
cardmhz = 600
ident = 0963:000000
group = 1

When i add text in Oscam.server 003 002 it stops showing entitlements is that normal ?
it also says that ttyUSB0 not recognised or card not inserted

dabdig · May 13th 2014

I decided to stop asking for help and do more reding but have now come unstuck

I have Ubuntu server CCcam Oscam 2_1.3 Smargo reader with white Sxx card 1 internal box connected to bedroom everything seems okay but cannot view channels in bedroom

Any help with this would be appreciated

Thanks

CONFIGURATION

==============================================

CCcam.cfg reads ----->

SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :admin
WEBINFO PASSWORD :admin
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
SERIAL READER : /dev/ttyUSB0 smartreader+
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
BOXKEY: /dev/sci0 xx xx xx xx
PIN : /dev/sci0 1234
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 4800000

N: 127.0.0.1 10000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
F: share1 bedroom 2 0 0 { 0:0:0, 0963:0:0, 0961:0:0 }

==============================

CCcam Cline LINE on Bedroom OPENBOX S10 Updated with latest channel List

C: 192.xxx.x.xxx 12000 share1 xxxxxxx

==============================

In CCcam webinfo

Welcome to CCcam 2.1.3 server

Current time 10:02:11
NodeID: dbbfb18bca73c7ef
Uptime: 00d 00:05:56
Connected clients: 1
Active clients: 0
Total handled client ecm's: 0
Total handled client emm's: 0
Peak load (max queued requests per workerthread):

Active Clients

+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
| share1| |
+---------+---------------------------------------+

Clents >

Connected clients: 1
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
|share1 |192.168.1.64 |00d 00:12:31|00d 00:12:31|0 (0)|0 (0)| 2.1.4 | | |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+

+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
| share1| |
+---------+---------------------------------------+

Servers >

Shares >

Available shares: 2

+----------------------+------------+----+-------+----------+-------+-------+
| Host | Type |Caid| System| Providers|Uphops | Nodes |
| | | | | |Maxdown| |
+----------------------+------------+----+-------+----------+-------+-------+
|127.0.0.1:10000 |newcamd | 963|nds |0 |0 7 | |
|/dev/ttyUSB0 |smartreader+| 963|nds |0 |0 11 | |
+----------------------+------------+----+-------+----------+-------+-------+

Providers >

Available providers:

+----+----------+--------------+-----+
|Caid| Provider | Provider Name| System|
+----+----------+--------------+-----+
| 963| |xxx UK (28E) |nds |
+----+----------+--------------+-----+

Entitlements >

card reader /dev/ttyUSB0
handled 0(0) ecms and 0(0) emms
Nds card xxxxxxx

Entitlement info
003 27-06-2014
00b 27-06-2014
0010 27-06-2014
001d 27-06-2014
0057 27-06-2014
30e1 08-07-2014
30e2 08-07-2014
b732 27-06-2014
b736 27-06-2014
b765 27-06-2014
b766 27-06-2014
b772 27-06-2014
b773 27-06-2014
b846 27-06-2014
b848 27-06-2014
b860 27-06-2014
b8d2 27-06-2014
b968 27-06-2014

====================================================

In Oscam

=====================================================

oscam.cnfg

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.254.254
httprefresh = 15

[newcamd]
port = 10000@0963:000000
key = 0102030405060708091011121314
keepalive = 1
------------------------------------------------------

oscam.server

Blank

------------------------------------------------------

oscam.server.bak

Blank

------------------------------------------------------

oscam.user

[account]
user = xxxxx
pwd = xxxxx
monlevel = 0
uniq = 0
group = 1,2
au = 1

-------------------------------------------------------

dabdig · May 11th 2014

Hi Have managed at last to set up server to enable me to watch Sxx on openbox s10 in bedrooms

Everything seems okay but nothing will clear on s10

When i view Oscam Live Log it is showing

014/05/11 16:05:05 8AD0908 c client connected to 10000 port
2014/05/11 16:05:05 8AD0908 c user cccam is trying to connect but doesnt exist ! (CCcam)
2014/05/11 16:05:05 8AD0908 c plain newcamd-client 127.0.0.1 rejected (no such user)
2014/05/11 16:05:05 8AD0908 c anonymous disconnected from 127.0.0.1

am i missing Something my CCconfig is

SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :admin
WEBINFO PASSWORD :admin
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : yes
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
BOXKEY: /dev/sci0 xx xx xx xx
PIN : /dev/sci0 1234
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3580000

N: 127.0.0.1 10000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
F: mybox1 12345678 3 0 0 { 0:0:2, 0963:0:0, 0961:0:0 }

In CCcam webinfo

Current time 16:15:40
NodeID: 4a40b31199192feb
Uptime: 00d 02:15:45
Connected clients: 1
Active clients: 0
Total handled client ecm's: 0
Total handled client emm's: 0
Peak load (max queued requests per workerthread):

What am I doing wrong

dabdig · May 10th 2014

Thanks Will give it a go

also :: I have looked at a lot of posts for CCcam settings and was wondering why I do not a have a CCcam x86 which is mentioned a lot (n Bin I have CCcam_2.1.3)

I have tried to access using several other ftp still wont let me connect

dabdig · May 10th 2014

Hi Thanks

I have use both my Serveres IP Address and dyn address and the same loging deatils I use for putty and winSCP (root - password) path is /var/etc/

When I click on download CFG I get a box come up saying connection failed

I have not tried other ftp as i thought it woiuld be easier to use thios to get lines for my box to test if it connects

Completely new to this and very stuck

dabdig · May 10th 2014

Hi I have set up ubuntu server as by tutorial every as should be i think I have just installed Easy CCconfig but it wont connect to my server

Could I have set something up wrong ?

Thanks

dabdig · May 8th 2014

On to the nest level sorry : Why do I need a dyn account and which one should I get is it just for remote access

dabdig · May 8th 2014

Thanks : I was putting IP address:8888 in as well as :16001 but still nothing downloaded chrome and Mozilla and it's fine in both browsers must have been a Internet explorer thing.

Dave

dabdig · May 8th 2014

Hi Great Guide especially for a newbie like me but unfortunately help is needed Have completed Ubuntu install and CCcam and oscam but when I put my servers ip address in internet explorer I was just get connecting message just had an update on windows to IE 11 and now it just shows bing results ???
Thanks

Posts by dabdig

Help needed Set Up nearly there Ubuntu/CCcam/smargo

Help needed Set Up nearly there Ubuntu/CCcam/smargo

Help needed Set Up nearly there Ubuntu/CCcam/smargo

Help needed Set Up nearly there Ubuntu/CCcam/smargo

Help needed Set Up nearly there Ubuntu/CCcam/smargo

Help needed Set Up nearly there Ubuntu/CCcam/smargo

Help needed Set Up nearly there Ubuntu/CCcam/smargo

Help needed Set Up nearly there Ubuntu/CCcam/smargo

Help No Channels Ubuntu/CCcam.Smargo

Easy CCconfig 2.3 not connecting

Easy CCconfig 2.3 not connecting

Easy CCconfig 2.3 not connecting

Tutorial - Ubuntu Server 11.10, 12.xx, 13.04 x32/x64 - Auto Oscam/CCcam 2.1.3 Install

Tutorial - Ubuntu Server 11.10, 12.xx, 13.04 x32/x64 - Auto Oscam/CCcam 2.1.3 Install

Tutorial - Ubuntu Server 11.10, 12.xx, 13.04 x32/x64 - Auto Oscam/CCcam 2.1.3 Install