I've done all this and still no luck
Tutorial - Ubuntu Server 11.10, 12.xx, 13.04 x32/x64 - Auto Oscam/CCcam 2.1.3 Install
-
- Article
- thatfellow
- Thread is marked as Resolved.
-
-
Thank you very much for all your efforts. Very clear howto
-
Quote
Is your setup on a local PC or VPS?
-
It's on a local PC
-
how much overclocking is possible on these cards readers? OMNIKEY CardMan 3021
it is possible to get even lower ecm time without destroying cards?Do these settings currently in oscam:
[reader]
label = conax
protocol = pcsc
device = 0
autospeed = 0
caid = 0B00
detect = cd
mhz = 600
ident = 0B00:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1[reader]
label = nds
protocol = pcsc
device = 1
autospeed = 0
caid = 093E
boxid = xxxxxxxx
detect = cd
mhz = 600
ident = 093E:000000
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1 -
Quote
Overclocking OMNIKEY CardMan 3021 USB on ubuntu.
how much overclocking is possible on these cards readers? OMNIKEY CardMan 3021
it is possible to get even lower ecm time without destroying cards?Do these settings currently in oscam:
Cardman 3021 cant be overclocked m8
So this will surfice..Code
Display More[reader] label = conax protocol = pcsc device = 0 caid = 0B00 detect = cd ident = 0B00:000000 group = 1 emmcache = 1,3,2 blockemm-unknown = 1 [COLOR='#FF0000']blockemm-u = 1[/COLOR] blockemm-g = 1 [reader] label = nds protocol = pcsc device = 1 caid = 093E boxid = xxxxxxxx detect = cd ident = 093E:000000 group = 2 emmcache = 1,3,2 blockemm-unknown = 1 blockemm-s = 1
Also m8, not familiar with the conax card but you are blocking unique EMMs, is that correct?
-
Cardman 3021 cant be overclocked m8
So this will surfice..Code
Display More[reader] label = conax protocol = pcsc device = 0 caid = 0B00 detect = cd ident = 0B00:000000 group = 1 emmcache = 1,3,2 blockemm-unknown = 1 [COLOR='#FF0000']blockemm-u = 1[/COLOR] blockemm-g = 1 [reader] label = nds protocol = pcsc device = 1 caid = 093E boxid = xxxxxxxx detect = cd ident = 093E:000000 group = 2 emmcache = 1,3,2 blockemm-unknown = 1 blockemm-s = 1
Also m8, not familiar with the conax card but you are blocking unique EMMs, is that correct?
Shared is the emm you are after with conax cards so that is correct mate...
hacked as said by thatfellow omnikeys run at 5mz so if anyone is going to set card mhz to anything with omnikeys it should be set at = 500
If you really want to overclock your card to say 6mhz then i would recommend an ftdi reader...tbh tho omnikey readers are great and your omnikey is already overclocking your card so no real need to buy another reader.
Below is my reader for a conax card...the emmcache i am using is required for the particular caid i am sharing so you might want to try that too
[reader]
label = npoland
description = npoland
protocol = mouse
device = /dev/ttyUSB0
pincode = 1234
services = !orf,!***_link,npoland
cacheex_allow_request = 0
caid = 0B01
rsakey = XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
ecmwhitelist = 0B01:6C,76
detect = cd
mhz = 600
ident = 0B01:000000
group = 3
emmcache = 1,3,-1
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
saveemm-s = 1
auprovid = 000B01 -
Quote
Also m8, not familiar with the conax card but you are blocking unique EMMs, is that correct?
my conax card needs no unique emm.
The card is updated only with shared emm.setting emmcache = 1,3, -1, I have not tried. Have always used emmcache = 1,3.2 for Viasat and Canal Digital, and can of course try your example.
My main problem is really that ecm time varies widely, even on a local user on my network. ecm time may vary from 200ms to 1500ms. But maybe it should be so in oscam? -
my conax card needs no unique emm.
The card is updated only with shared emm.setting emmcache = 1,3, -1, I have not tried. Have always used emmcache = 1,3.2 for Viasat and Canal Digital, and can of course try your example.
My main problem is really that ecm time varies widely, even on a local user on my network. ecm time may vary from 200ms to 1500ms. But maybe it should be so in oscam?emmcache is really only for updating emms so thats just a suggestion for future updating of your conax cards entitlements... varying ecm times with conax cards does happen..i seen mine go up and down like a barmaids knickers but it is never a problem freezing wise...i am not sure if canal are upto something mind you....
Viasat is ofcourse nds...in an earlier post i spotted you were not blocking global..not an immediate issue but are you experiencing high ecm times with this card too?
As a test run your problem card/s in a linux box to determine whether you have server issues or not.
-
No problem with nds card, also tried swapping readers but get the same result. Have no problem with freezing though ecm time varies conax and leave it at that.
Thanks for the input. -
Hi Great Guide especially for a newbie like me but unfortunately help is needed Have completed Ubuntu install and CCcam and oscam but when I put my servers ip address in internet explorer I was just get connecting message just had an update on windows to IE 11 and now it just shows bing results ???
Thanks -
Quote
Hi Great Guide especially for a newbie like me but unfortunately help is needed Have completed Ubuntu install and CCcam and oscam but when I put my servers ip address in internet explorer I was just get connecting message just had an update on windows to IE 11 and now it just shows bing results ???
ThanksYou will need to use:
ip_address:webif_port_noe.g.
192.168.1.100:8888 -
newbie need a bit of help, (great tutorial easy to follow) have the server up and running with a infnity usb phoenic with a uk sly white card.
smartcard clock frequency is set to 3570000. it working and have tested on a dreambox but entertainment channels work but movies are still locked out,
is it sly stopping it at there end or do i need to update oscam or cccam. all help willl be great thx's guys,,,,,,,,, #80) -
Thanks : I was putting IP address:8888 in as well as :16001 but still nothing downloaded chrome and Mozilla and it's fine in both browsers must have been a Internet explorer thing.
Dave
-
On to the nest level sorry : Why do I need a dyn account and which one should I get is it just for remote access
-
hi i installed all works but then after a minute or so all freezes up then comes back on again then freezes up again is it because the oscam is unstable? anyhelp welcome on this the channel does show but then scrambles then comes back on for a minute or so then scrambles again
-
Quote
hi i installed all works but then after a minute or so all freezes up then comes back on again then freezes up again is it because the oscam is unstable? anyhelp welcome on this the channel does show but then scrambles then comes back on for a minute or so then scrambles again
No, nothing to do with oscam unstable build. All current oscam builds are marked unstable.. Can you post oscam log for this period please...
-
I tried to install oscam in ubuntu server 14.04lts, but I can not.
of me always error.Anyone know what to do to resolve this and get osacm in ubuntu 14.04lts
thanks
-
2014-03-25 - cccam-oscam Ubuntu x32-x64 (1).rar trying to do a frsh install i am not getting the two files only getting this one any ideas
Ignore tweet zip vanished
-
Var/etc/cccam.cfg is missing but cccam webinfo is loading up where is cccam.cfg located at
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!