I have a white sly card that has sports enabled and I am looking to put it into a prismcube, prismcube has bh image 1.7.3 and Oscam-129r9753 installed. what else do I need and is there a tutorial?
using a white sly card with prismcube
- darnit73
- Thread is marked as Resolved.
-
-
This will get you up & running buddy: How-To: Oscam or Oscam & CCcam For SLY UK CAID 0963
-
thanks for the oscam files loaded , but this may seem a stupid question were do I put the ipk files? and do I need to restart box rescan afterwards?
-
You don`t need the .ipk, just the configs.. Download the attached file and extract..
Oscam configs for UK card are in folder mnt/hdd0/program/tuxbox/config/
Send these configs to the same folder on the prismcube and restart oscam..
-
I have made the latest version of oscam with uk configs included.. I have no way of testing this so your feedback would be appreciated buddy..
-
I added the latest oscam 9764 to tmp folder , went to bh addons and it wasn't found so unable to say if it is any good. I also put the oscam files in folder mnt/hdd0/program/tuxbox/config/ restarted oscam still no joy. I really don't know what im doing wrong
-
Connect to the oscam webinterface in your browser like this ==> http://ip.address.of.prismcube:8888
Restart oscam then copy and paste the log here so we can see what errors there are..
-
2014/06/17 13:25:58 0 s cccam: Bind request failed (Address already in use), waiting another 5 seconds
2014/06/17 13:25:59 0 s cccam: Bind request failed (Address already in use), waiting another 4 seconds
2014/06/17 13:26:00 0 s cccam: Bind request failed (Address already in use), waiting another 3 seconds
2014/06/17 13:26:01 0 s cccam: Bind request failed (Address already in use), waiting another 2 seconds
2014/06/17 13:26:02 0 s cccam: Bind request failed (Address already in use), waiting another 1 seconds
2014/06/17 13:26:03 0 s cccam: Bind request failed (Address already in use), giving up
2014/06/17 13:26:03 0 s ***UK [internal] creating thread for device /dev/sci0
2014/06/17 13:26:03 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/17 13:26:03 0 s waiting for local card init
2014/06/17 13:26:03 2AD5FD18 r [Cool_Init:46] cnxt_smc_enable_flow_control: API ERROR 3 (CNXT_STATUS_INTERNAL_ERROR)
2014/06/17 13:26:03 2AD5FD18 r ***UK [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2014/06/17 13:26:03 2AD5FD18 r ***UK [internal] card detected
2014/06/17 13:26:03 2AD5FD18 r [Cool_SetClockrate:75] cnxt_smc_set_clock_freq: API ERROR 3 (CNXT_STATUS_INTERNAL_ERROR)
2014/06/17 13:26:03 30102470 h webif: decompressed 151324 bytes back into 360528 bytes
2014/06/17 13:26:03 30102470 h HTTP Server running. ip=0.0.0.0 port=8888
2014/06/17 13:26:03 2AD5FD18 r [Cool_FastReset:64] cnxt_smc_get_atr: API ERROR 3 (CNXT_STATUS_INTERNAL_ERROR)
2014/06/17 13:26:04 2AD5FD18 r [Cool_Reset:137] cnxt_smc_get_atr: API ERROR 3 (CNXT_STATUS_INTERNAL_ERROR)
2014/06/17 13:26:04 2AD5FD18 r ***UK [internal] ATR: 00 00
2014/06/17 13:26:04 2AD5FD18 r ***UK [internal] ERROR: Could not read reader->convention
2014/06/17 13:26:04 2AD5FD18 r ***UK [internal] Error activating card.
2014/06/17 13:26:04 2AD5FD18 r [Cool_SetClockrate:75] cnxt_smc_set_clock_freq: API ERROR 3 (CNXT_STATUS_INTERNAL_ERROR)
2014/06/17 13:26:04 2AD5FD18 r [Cool_FastReset:64] cnxt_smc_get_atr: API ERROR 3 (CNXT_STATUS_INTERNAL_ERROR)
2014/06/17 13:26:04 2AD5FD18 r [Cool_Reset:137] cnxt_smc_get_atr: API ERROR 3 (CNXT_STATUS_INTERNAL_ERROR)
2014/06/17 13:26:04 2AD5FD18 r ***UK [internal] ATR: 00 00
2014/06/17 13:26:04 2AD5FD18 r ***UK [internal] ERROR: Could not read reader->convention
2014/06/17 13:26:04 2AD5FD18 r ***UK [internal] Error activating card.
2014/06/17 13:26:05 2AD5FD18 r [Cool_SetClockrate:75] cnxt_smc_set_clock_freq: API ERROR 3 (CNXT_STATUS_INTERNAL_ERROR)
2014/06/17 13:26:05 2AD5FD18 r [Cool_FastReset:64] cnxt_smc_get_atr: API ERROR 3 (CNXT_STATUS_INTERNAL_ERROR)
2014/06/17 13:26:05 2AD5FD18 r [Cool_Reset:137] cnxt_smc_get_atr: API ERROR 3 (CNXT_STATUS_INTERNAL_ERROR)
2014/06/17 13:26:05 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9753 (arm-cortex-linux-gnueabi-su980-libusb)
2014/06/17 13:26:05 2AD5FD18 r ***UK [internal] ATR: 00 00
2014/06/17 13:26:05 2AD5FD18 r ***UK [internal] ERROR: Could not read reader->convention
2014/06/17 13:26:05 2AD5FD18 r ***UK [internal] Error activating card.
2014/06/17 13:26:06 2AD5FD18 r ***UK [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/06/17 13:26:06 2AD5FD18 r ***UK [internal] card initializing error
2014/06/17 13:26:06 0 s init for all local cards done
2014/06/17 13:26:06 0 s anti cascading disabled
2014/06/17 13:26:06 2ADA5430 c plain dvbapi-client granted (linuxsatsupport, au=on (1 reader))
2014/06/17 13:26:06 2ADA5430 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 -
Try the attached version, see if it will install plz buddy..
-
righr I ftp this to tmp folder , open bh addons, install local bhp package. it doesn't recognise this format (tar.gz) it wants bhp.tz format
-
-
or do I extract and install the files manually?
-
righr I ftp this to tmp folder , open bh addons, install local bhp package. it doesn't recognise this format (tar.gz) it wants bhp.tz format
Can you rename it to bhp.tz, does that make any difference ?
-
yep, its installed now but still can't access any scrambled channels
-
yep, its installed now but still can't access any scrambled channels
Can you show us another oscam log plz..
-
its asking for a username and password to access the server
-
its asking for a username and password to access the server
Look in oscam.conf for [webif] login details..
-
user and password don't work, these are what is listed in conf file
-
any further thoughts on what I could do next
-
Can you edit the oscam.conf file and change the default user & password? when done ftp the file back over to the box then do a restart.... oscam is working if it's asking you for the username & password to view the webif
Firmware, downloads and support for PrismCube Ruby.
Your community resource for the PrismCube Ruby satellite receiver — firmware images, channel lists, plugins and setup help.
