I am hopeing someone can help me here. Been at this all day with no joy. Trying to get movies SD channels opened in my vu+ ultimo. I know i have no chance with the HD channels but i didnt think the sd channels were gone as well. I also got btsprts and it wont open either? If someone could point me in the right direction to get this fixed i would be very grateful.
Cant get movies SD working
-
- Videoguard2 Cards OSCam
- meekatr0n
- Thread is marked as Resolved.
-
-
Ok what image and cams are you using??? do you use your own card or a share??? has this problem only occurred since you changed anything??? the more info we get the better buddy...
-
I'm using black hole image.
OSCAM: 1.20-unstable_svn Build: r9564
oscam.server =
[reader]
label = ***uk
description = local
protocol = internal
enable = 1
device = /dev/sci0
BoxID = 00 00 00 00
caid = 0963
detect = cd
ident = 0963:000000
pincode = 3929
blockemm-u = 0
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1This is my own card with all premium channels
got the boxid from a guide i found "17 digit number on back of reciever, take first 6 digits off then last digit, then convert remaining to hex"
Pin is put in because you must enter the pin every time, even on official reciever, when switching to movie channel, i called them today about this and they told me no way it can be removed. -
A quick copy from oscam log looks like this after trying to go to moviesSD
2014/07/12 22:40:13 77608550 CD 5A 90 3B C0 04 4C 85 48 97 DC 6F AE C6 8F BA
2014/07/12 22:40:13 77608550 CE D8 C6 8F BA 5F 9E CC 5F 12 FF 1D 1E 83 B5 54
2014/07/12 22:40:13 77608550 E4 03 23 DF B9 9B 89 61 05 82 03 6E A0 D6 58 6A
2014/07/12 22:40:13 77608550 A6 1B B5 C9 A1 96 9B 2F F1 2C 52 6C 8C 75 77
2014/07/12 22:40:13 77608550 c [GET_CW] wait_time 0 caid 0963 prov 000000 srvid 1612 rc 100 cacheex cl mode 0 ex1rdr 0
2014/07/12 22:40:13 77608550 c request_cw stage=2 to reader ***uk ecm hash=802050C5AED89A0C68195DEEB878760D
2014/07/12 22:40:13 77608550 c start reader thread action 5
2014/07/12 22:40:13 776066C8 r data from add_job action=5 client r ***uk
2014/07/12 22:40:13 776066C8 r start client thread action 32
2014/07/12 22:40:13 77608550 c data from add_job action=32 client c dreambox
2014/07/12 22:40:13 77608550 c dreambox (0963&000000/FFFF/1612/5F:802050C5AED89A0C68195DEEB878760D): not found (14 ms) by ***uk -
The boxid parameter is not needed, oscam reads the boxkey by itself.. Remove that line and restart oscam. The attached configs are tried and tested.
If it still doesn`t work after trying the attached configs we will need to see an oscam log from start up and after zapping some premium channels..
Has your card been inserted in an official receiver recently ?
-
Ok still no joy. i can get "Atlantic and other *** channels just not the movies or sports on sd ? Tried to get the best of the log file copied over for you to have a look at.
Oh and yes the card was in the *** reciever recently but this happened before this. -
If the card has been in an official receiver it will be paired, you won`t be able to use it in any other receiver now.. Which make and model is the official receiver ?
The oscam configs are working fine, your card has been hit with sly`s new anti cs pairing method..
-
drx890w is the only model number i see.Seems to be branded by ***. Will the option of using an older box on multiroom still work, or have they stopped that as well? Damm ***! taking off the SD channels is madness even btsprts wont work.
Looking at my oscam log file your are right but, it is throwing the same errors for both SD and HD movie channels. -
You could try re pairing the card to an old sd receiver.. Not sure if sly will allow it, but only one way to find out buddy..
-
no probs. Cheers for your help and time. Hopefully I will get it sorted. I will keep you posted if i find a solution.
-
you can dump the key i have been told not sure if it works never had to but they used same method on the cable
-
I have same problem and like budd131 said it happened before it went back in the receiver been trying for a week now to get it sorted no joy,I thought it was CCcam not clearing so i changed to OScam and still the same
-
Well I have managed to get movie channels back up and running on my VU+ box. I had to register a new card on an thompson HD reciever. It took a lot of phone calls to get it working but eventually did. I was told a new reciever was needed which they did offer to replace for free, but I managed to keep my old one. All I can say is good luck to anyone trying this method, you will need some good excuses to keep your old reciever. Big thanks goes out to Master G and Rami for helping me out with this and putting up with all my questions.
-
Similar problem. I cannot open premium channels at present. Everything was working fine using oscam and local card. I didnt get an entitlement update so i used their website activate my channels . .com
This got the entitlement updated but its killed the prmium channels. The white card is paired with a hd box but hasnt been insterted in the hd box for years.
I've got an old sd box. is there something i can do with the sd box? does the model of the sd box matter - its not thomson
-
You need to pair your card to the old sd box to get the premium channels back...... any sd sly box will do.
-
Can I pair it using their website to activate channels? The serial number on the system details screen is 10 digits. Do I insert a zero at the start to make it 11 digits?
-
Can I pair it using their website to activate channels? The serial number on the system details screen is 10 digits. Do I insert a zero at the start to make it 11 digits?
You need to phone them
- - - Updated - - -
you could always try the box connected to the phone line and use the engineers menu to pair it
-
Can I pair it using their website to activate channels? The serial number on the system details screen is 10 digits. Do I insert a zero at the start to make it 11 digits?
Use the live chat on the sly website...... does the same job as calling them and a lot easier to use as well.
-
Thanks I will report back...
-
Hi All,
I think Sly have started blocking the premium channels on old Thompson SD box. I have that I've been using for over a year now. Currently all premium channels are working fine in that box but not clearing in my server. I updated my oscam to the latest version 10085 this evening and stiil no joy. Anyone experience the same issues?
Thank you
Fulgas
pairing
Similar problem. I cannot open premium channels at present. Everything was working fine using oscam and local card. I didnt get an entitlement update so i used their website activate my channels . .com
This got the entitlement updated but its killed the prmium channels. The white card is paired with a hd box but hasnt been insterted in the hd box for years.
I've got an old sd box. is there something i can do with the sd box? does the model of the sd box matter - its not thomson
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!