DM500HD & Newnigma2 > no webinterface !

There are 4 replies in this Thread which was already clicked 4,809 times. The last Post () by soevel.

    Hello All,


    My DM500HD clone works 100 % fine but no webinterface is possible.
    I have image Newnigma2 rel. 2011-01-22.


    I can reach the box via DCC and Dreamedit. Furthermore I can reach the CCcam server via 192.168.x.x:16001


    In the configuration I have enabled the Webinterface, I also changed several parameters but nu result.
    I also downloaded a new webinterface with the built in downloader, again no results.


    I am a little afraid to flash a new image and possibly come in (bricked) problems.


    Can you give me tips?


    Thanks in advance,


    Ko

    • Official Post

    Hi, i found this on the newnigma website. Give it a try


    have a look at:
    Menue->Extentions->WEB Interface


    allow https access yes
    allow http acces (only yes, if your box is not connected to internet, like access via dyndns, otherwise no)


    In your browser (PC) try:
    https://<IP of your box>:443


    If that won't work, try:
    cmd console on your PC an enter:
    telnet <IP of your box> 443


    If you get an error message your web-Interface has a problem, or your firewall is blocking the traffic. If you get no error message (and nothing at all) everything is fine with your web-interface.

    Thanks Ten Below quick reply,


    I already tried http(s) <ipaddress>:443 with no result. I have to try with yes/no web access.


    I am out of my home until saturday, then I give it a try and give feedback.


    "to be continued"

    Back home I tried with webaccess settings yes/no


    https <ip> 443
    http <ip>:80


    Same I tried with telnet which gave error "cannot connect to <ip>:*""


    http:<ip> to CCcam server on port 16001 works well!


    I also switched off the firewall and repeated the tests


    Now I am :26_002:


    Please comment on this?


    regards Ko

    I had the exact same problem. I flashed a new image (ferrari_dm500HD) and problem was solved.
    You can PM me for furter assistance later on if you want


Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login