oscam config

**busman** · Sep 5th 2014

having trouble with oscam config for bt sport & tring cards its shows no connection for both
bt sport on its own works fine any idea guys oscam v 9584

Code

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
logfile = /var/log/oscam.log
usrfile = /var/log/oscam.log
cwlogdir = /opt/oscam/cw




[monitor]
port= 988
nocrypt = 127.0.0.1
aulow = 120
monlevel = 1




[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httprefresh = 10




[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000
keepalive = 1










[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
logfile = /usr/local/etc/oscam.log




[newcamd]
Key = 0102030405060708091011121314
Port = 10001@0BAA:000000




[webif]
httpport = 9999
httpuser = adim
httppwd = admin
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255







[reader]
label = ***uk
enable = 1
protocol = smartreader
device = 006:002
detect = cd
mhz= 400 
cardmhz = 357
cardmhz = 600
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963
ident = 0963:000000
















[reader]
label = Tring
Protocol = smartreader
detect = CD
device = 008:002
Group = 1
EMMCache = 1,3,2
PinCode = 1234
caid = 0BAA
ident = 0BAA:000000[reader]










[account]
user = user
pwd = pass
group = 1
uniq = 2
monlevel = 1
au = ***uk
caid = 0963
ident = 0963:000000













[account]
user = tring
pwd =  pass
group = 1
au = Tring

Display More

many thanks

**master G** · Sep 5th 2014

In telnet type lsusb and press enter. Copy the output to here.. There are a number of things wrong with the configs, but before i alter anything tell me if you are using oscam or oscam & CCcam..

**busman** · Sep 5th 2014

M.G oscam / CCAM

Code

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      iProduct 2 EHCI Host Controller
      iSerial 1 0000:00:1d.7
Bus 008 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
      iProduct 0
      iSerial 0
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      iProduct 2 UHCI Host Controller
      iSerial 1 0000:00:1d.2
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      iProduct 2 UHCI Host Controller
      iSerial 1 0000:00:1d.1
Bus 006 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
      iProduct 0
      iSerial 0
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      iProduct 2 UHCI Host Controller
      iSerial 1 0000:00:1d.0
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      iProduct 2 EHCI Host Controller
      iSerial 1 0000:00:1a.7
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      iProduct 2 UHCI Host Controller
      iSerial 1 0000:00:1a.2
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      iProduct 2 UHCI Host Controller
      iSerial 1 0000:00:1a.1
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      iProduct 2 UHCI Host Controller
      iSerial 1 0000:00:1a.0

Display More

**master G** · Sep 5th 2014

Try these configs buddy..

Code

####oscam.conf####




[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1




[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.254.254
httprefresh = 15




[newcamd]
port = 10001@0963:000000;10002@0BAA:000000
key = 0102030405060708091011121314
keepalive = 1




####oscam.server####




[reader]
label = uk
protocol = smartreader
device = 006:002
caid = 0963
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1




[reader]
label = Tring
protocol = smartreader
detect = cd
device = 008:002
group = 2
emmcache = 1,3,2
pincode = 1234
caid = 0BAA
ident = 0BAA:000000




####oscam.user####




[account]
user = linuxsat
pwd = support
group = 1
au = uk




[account]
user = linuxsat1
pwd = support1
group = 2
au = Tring




####CCcam.cfg####




N: 127.0.0.1 10001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 10002 linuxsat1 support1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Display More

**busman** · Sep 6th 2014

master g i got it working on its own but the screen is black still maybe it need update its prepayed here is log

Code

2014/09/06 17:46:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9584 (i686-linux-gnu-libusb-pcsc)
2014/09/06 17:46:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 942
2014/09/06 17:46:02 0 s services reloaded: 0 services freed, 25 services loaded, rejected 0
2014/09/06 17:46:02 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/09/06 17:46:02 0 s signal handling initialized
2014/09/06 17:46:02 0 s 887 service-id's loaded in 2ms
2014/09/06 17:46:02 0 s newcamd: initialized (fd=5, port=10000)
2014/09/06 17:46:02 0 s -> CAID: 0BAA PROVID: 000000
2014/09/06 17:46:02 0 s Tring [smartreader] creating thread for device 002:002
2014/09/06 17:46:02 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/06 17:46:02 0 s waiting for local card init
2014/09/06 17:46:02 9925840 r Tring [smartreader] De SR_init
2014/09/06 17:46:02 9925840 r Tring [smartreader] initing smargo type SR
2014/09/06 17:46:02 9925840 r Tring [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/09/06 17:46:02 9925840 r Found smartreader device 002:002
2014/09/06 17:46:02 99275C8 h webif: decompressed 144090 bytes back into 351512 bytes
2014/09/06 17:46:02 99275C8 h HTTP Server running. ip=0.0.0.0 port=8888
2014/09/06 17:46:02 9925840 r Tring [smartreader] Creating smartreader thread.
2014/09/06 17:46:02 9925840 r Tring [smartreader] clocking for smartreader with smartreader protocol
2014/09/06 17:46:02 9925840 r Tring [smartreader] Reader initialized (device=002:002, detect=cd, mhz= AUTO, cardmhz=369)
2014/09/06 17:46:03 9925840 r Tring [smartreader] card detected
2014/09/06 17:46:03 9925840 r Tring [smartreader] init card at 369 mhz
2014/09/06 17:46:04 9925840 r Tring [smartreader] ATR: 3B 34 94 00 30 42 30 30
2014/09/06 17:46:04 9925840 r Tring [smartreader] Init card protocol T0, FI=9, F=512, D=8, N=0
2014/09/06 17:46:04 9925840 r Tring [smartreader] Calculated work ETU is 11.99 us reader mhz = 534
2014/09/06 17:46:04 9925840 r Tring [smartreader] autospeed = 1
2014/09/06 17:46:04 9925840 r Tring [smartreader] Effective reader settings mhz =534 F= 512 D= 8 N=0 T=0 inv=0 parity=EVEN
2014/09/06 17:46:05 9925840 r Tring [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/09/06 17:46:06 9925840 r Tring [smartreader] type: Conax, caid: 0BAA, serial: ##########, hex serial: ########, card: v64
2014/09/06 17:46:06 9925840 r Tring [smartreader] Providers: 1
2014/09/06 17:46:06 9925840 r Tring [smartreader] Provider: 1 Provider-Id: 000000
2014/09/06 17:46:06 9925840 r Tring [smartreader] Provider: 1 SharedAddress: ########
2014/09/06 17:46:06 9925840 r Tring [smartreader] found card system conax
2014/09/06 17:46:06 9925840 r Tring [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/09/06 17:46:06 9925840 r Tring [conax] Package: 1, id: 1111, classes: 01000FFF, date: 2014/01/12 - 2014/01/22, name: Preview
2014/09/06 17:46:06 9925840 r Tring [conax] Package: 2, id: 1111, classes: 01000FFF, date: 1990/01/01 - 1990/01/01, name: Preview
2014/09/06 17:46:06 9925840 r Tring [conax] PPV-Event: 1, id: 1001, date: 2014/01/06 - 2015/01/06, name: Paket e Plote 12 mua
2014/09/06 17:46:06 9925840 r Tring [conax] ready for requests
2014/09/06 17:46:07 0 s init for all local cards done
2014/09/06 17:46:07 0 s anti cascading disabled
2014/09/06 17:46:32 994AA78 c client connected to 10000 port
2014/09/06 17:46:32 994AA78 c encrypted newcamd:10000-client 127.0.0.1 granted (tring, au=on (1 reader))
2014/09/06 17:46:32 994AA78 c user tring authenticated successfully (CCcam)
2014/09/06 17:46:32 994AA78 c AU enabled for user tring on reader Tring
Switch Debug from 0 to   0   1   2   4   8   16   32   64

Display More

**master G** · Sep 6th 2014

Check the tring card has recent entitlements.. How To See Your Card Entitlements When Using Oscam..

This card doesn`t update in oscam alone, you need oscam & mgcamd, or a receiver that has a conax embedded card reader or a conax cam.

rimpywala · Sep 14th 2014

good sharing thnx

please tell me anyone ... how can i conf.... osccam.... italysat image ....in cloud i box ii plus clone

**kennboy** · Sep 22nd 2014

Quote from master G

Try these configs buddy..

Code

####oscam.conf####




[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1




[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.254.254
httprefresh = 15




[newcamd]
port = 10001@0963:000000;10002@0BAA:000000
key = 0102030405060708091011121314
keepalive = 1




####oscam.server####




[reader]
label = uk
protocol = smartreader
device = 006:002
caid = 0963
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1




[reader]
label = Tring
protocol = smartreader
detect = cd
device = 008:002
group = 2
emmcache = 1,3,2
pincode = 1234
caid = 0BAA
ident = 0BAA:000000




####oscam.user####




[account]
user = linuxsat
pwd = support
group = 1
au = uk




[account]
user = linuxsat1
pwd = support1
group = 2
au = Tring




####CCcam.cfg####




N: 127.0.0.1 10001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 10002 linuxsat1 support1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Display More

master g will these configs work with a sly uk hd card, if i left the tring bit out, if so how do i change it to work with my card and cccam, do i use ccam 2.1.3 i see 256 in config thanks.

this aswell protocol = smartreader what should this be. solo2 vu+ bh 2.1.1

**master G** · Sep 22nd 2014

Quote from kennboy

master g will these configs work with a sly uk hd card, if i left the tring bit out, if so how do i change it to work with my card and cccam, do i use ccam 2.1.3 i see 256 in config thanks.

this aswell protocol = smartreader what should this be. solo2 vu+ bh 2.1.1

The latest oscam from here has the configs for UK card included m8, its set to use the internal card reader, not smargo => Oscam svn-9842 For BlackHole

oscam config

OSCam Support Forum

Participate now!

Share

Similar Threads

Oscam server ,cccam client :cannot receive a certain card but with cccam is ok

OSCAM No config files found please setup oscam first in etc/tuxbox/config

Please, help me to fix my config

add to oscam config for powervu

Tags