oscam softcam.key with openpli 4.0/dreambox 800se?

There are 12 replies in this Thread which was already clicked 10,776 times. The last Post () by moshe2go.

    Hi,


    I am working with openpli 4.0 on dreambox 800se and now adding oscam svn 9077-r0 (the only one available in the plugins downloads) -
    oscam seems working - I can connect via webserver and no errors after starting it from the console. However it does not open the channels -
    probably, something is missing so please advise the right process - where to put the keys file and with what name, the right reader and etc?
    I put the files: SoftCam.Key and constant.cw in /usr/keys.
    Hope following info may help to figure out the problem -
    oscam.server:


    [reader]
    label = card
    enable = 1
    protocol = internal
    device = /dev/sci0
    detect = cd
    group = 1
    emmcache = 1,3,15
    audisabled = 0
    mhz = 2700
    cardmhz = -1


    [reader]
    label = emu_constant.cw
    enable = 1
    protocol = constcw
    device = /usr/keys/SoftCam.Key
    group = 1


    oscam.conf:


    [global]
    disablelog = 1
    disableuserfile = 1
    usrfileflag = 0
    maxlogsize = 10
    preferlocalcards = 1
    saveinithistory = 1
    lb_mode = 0
    unlock_parental = 1


    [webif]
    httpport = 8081
    httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1


    #[dvbapi]
    #enabled = 1
    #au = 1
    #user = dvbapiau
    #request_mode = 0



    [dvbapi]
    enabled = 1
    au = 1
    user = dvbapiau
    boxtype = dreambox


    osca.user:


    #[account]
    #user = dvbapiau
    #pwd =
    #disabled = 0
    #group = 1
    #au = 1



    [account]
    user = dvbapiau
    au = 1
    group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
    cccmaxhops = 3


    status (sorry for the not nice output):


    hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
    Hide 0xa78e88 s 0 root 127.0.0.1 0 server 11.09.14 14:41:56 00:15:39 0000:0000 00:15:39 OK
    Hide 0x76800468 h 1 root 127.0.0.1 0 http 11.09.14 14:41:56 00:15:39 0000:0000 00:00:00 OK
    Readers 0/1
    Hide Restart r 1 card ON OFF 127.0.0.1 0 internal 0000:0000 no data 00:15:39 OFF (no entitlements)
    Proxies 1/1
    Hide Restart p 1 emu_constant.cw ON OFF 0.0.0.0 0 constcw 11.09.14 14:41:56 00:15:39 0500:29E5 no data 00:00:01 CONNECTED
    Clients 1/1 (1 with ECM within last 25 seconds)
    Hide Kill c 1 dvbapiau ON OFF 0.0.0.0 0 dvbapi 11.09.14 14:41:57 00:15:38 1813:29E5 by not found (1ms) 00:00:00 OK


    log:


    2014/09/11 15:00:01 A8DA58 p [CONSTCW] find controlword for CAID 0604 PROVID 000000 SRVID 29E5 VPID 007D ECMPID 00A5
    2014/09/11 15:00:01 A9BC50 c dvbapiau (0604&000000/0000/29E5/A4:89792584F4D0708831C398238B8C49D1): rejected reader sid (13 ms) by emu_constant.cw
    2014/09/11 15:00:01 A8DA58 p [CONSTCW] find controlword for CAID 0604 PROVID 000000 SRVID 29E5 VPID 007D ECMPID 00A5
    2014/09/11 15:00:01 A9BC50 c dvbapiau (0604&000000/0014/29E5/44:F46EF7E9EC6FD96D70101FA9B8E32D25): rejected reader sid (13 ms) by emu_constant.cw
    2014/09/11 15:00:01 A8DA58 p [CONSTCW] find controlword for CAID 0604 PROVID 000000 SRVID 29E5 VPID 007D ECMPID 00A5
    2014/09/11 15:00:01 A9BC50 c dvbapiau (0604&000000/0016/29E5/44:E5815CDEAF905BD243A1197A64DE5F6E): rejected reader sid (12 ms) by emu_constant.cw
    2014/09/11 15:00:01 A8DA58 p [CONSTCW] find controlword for CAID 0604 PROVID 000000 SRVID 29E5 VPID 007D ECMPID 00A5
    2014/09/11 15:00:01 A9BC50 c dvbapiau (0604&000000/00CF/29E5/44:274BE13A0B02D1FAFB4C4D016B10CD9D): rejected reader sid (12 ms) by emu_constant.cw
    2014/09/11 15:00:01 A8DA58 p [CONSTCW] find controlword for CAID 0604 PROVID 000000 SRVID 29E5 VPID 007D ECMPID 00A5
    2014/09/11 15:00:01 A9BC50 c dvbapiau (0604&000000/009D/29E5/44:5156DE69252322906224ACC7F8911B99): rejected reader sid (12 ms) by emu_constant.cw

    You need to change
    Mhz = 450
    cardmhz = 2700


    I would also update the oscam to a newer one.


    Sent from my SM-N9005 using Tapatalk

    alom,
    Thanks for your response!
    Should I change, what you suggested, to the first reader or both?
    Can you give me a link to a newer oscam that suiteable for my image and receiver:
    openpli 4.0 & Dreambox 800se clone?

    • Official Post
    Quote from moshe2go


    Can you give me a link to a newer oscam that suiteable for my image and receiver:
    openpli 4.0 & Dreambox 800se clone?


    Try the attached file and this config. You could try with oscam ymod or OSCam-emu instead..


    Code
    [reader]
label     = myconstantcw
protocol  = constcw
device    = /usr/keys/constant.cw
mhz       = 450
cardmhz   = 2700
group     = 7

    Master G,


    I tried your attached file with the config and it is not working.
    I tried also to change the config to group = 1 - still not ok.
    Where can I get oscam ymod or OSCam-emu suitable for my dreambox 800se/openpli 4.0?


    Thanks

    • Official Post

    For oscam-ymod, place the oscam.keys file in /etc/tuxbox/config/oscam


    oscam-emu doesn`t require a SoftCam.Key file as it`s patched into oscam, though it will make use of one if present (extra SoftCam.Key file added)..

    Quote from master G

    For oscam-ymod, place the oscam.keys file in /etc/tuxbox/config/oscam


    oscam-emu doesn`t require a SoftCam.Key file as it`s patched into oscam, though it will make use of one if present (extra SoftCam.Key file added)..


    Dear master G:


    First, Thanks for your files!
    However, still not working -


    oscam-ymod: Can not even connect through web - though I changed to the proper IP addreses range in oscam.conf.
    I'm getting the following errors while trying to start it from console (do not know how to put here 'codes'...):
    root@dm800se:/usr/bin# ./oscam
    Cannot open config file '/etc/tuxbox/config/oscam.conf' (errno=2)
    Cannot open config file '/etc/tuxbox/config/oscam.conf' (errno=2)
    Cannot open config file '/var/tuxbox/config/oscam.conf' (errno=2)
    Cannot open config file '/usr/tuxbox/config/oscam.conf' (errno=2)
    Cannot open config file '/var/etc/oscam.conf' (errno=2)
    Cannot open config file '/var/keys/oscam.conf' (errno=2)
    Cannot open config file '/usr/local/etc/oscam.conf' (errno=2)
    Cannot open config file '/usr/local/oscam/oscam.conf' (errno=2)
    Cannot open config file '/usr/oscam/oscam.conf' (errno=2)
    Cannot open config file '/etc/oscam/oscam.conf' (errno=2)
    Cannot open config file '/var/oscam/oscam.conf' (errno=2)
    Cannot open config file '/oscam/oscam.conf' (errno=2)
    Cannot open config file '/tmp/oscam.conf' (errno=2)
    Cannot open config file '/tmp/oscam/oscam.conf' (errno=2)
    Cannot open config file './oscam.conf' (errno=2)
    No config file './oscam.conf' found -> setting defaults
    Default config dir '/etc/tuxbox/config/'


    oscam-emu: I can connect through web but still something is missing.
    EDIT: During installation of oscam_emu I get this massage:
    'cat: can't open '/tmp/oscam.pid': No such file or directory' -
    Is it normal?


    Please let me know if I need only to install these files with 'opkg install'
    or should I change or add any reader or something to oscam.server or other files?
    Please advise!


    Thanks

    Edited 3 times, last by moshe2go ().

    Additional info -
    Here is the log of oscam_emu during trying to open channel: MEZZO in 13e.


    2014/09/14 09:44:17 0 --- Skipped 1 duplicated log lines ---
    2014/09/14 09:44:17 588978 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 8 ecmpids!
    2014/09/14 09:44:17 588978 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 0500 PROVID 007400 ECMPID 00A6 ANY CHID PMTPID 0073 VPID 007D
    2014/09/14 09:44:17 588978 c linuxsatsupport (0500&007400/08E2/29E5/2A:00000000000000000000000000000000): rejected caid (0 ms) (invalid caid 0x0500)
    2014/09/14 09:44:17 0 --- Skipped 1 duplicated log lines ---
    2014/09/14 09:44:17 588978 c [DVBAPI] Demuxer #0 trying to descramble PID #6 CAID 0604 PROVID 000000 ECMPID 00A5 ANY CHID PMTPID 0073 VPID 007D
    2014/09/14 09:44:18 588978 c linuxsatsupport (0604&000000/0000/29E5/A4:00000000000000000000000000000000): rejected caid (1 ms) (invalid caid 0x0604)

    Any one has any idea?? It seems that just a little thing is missing.
    Can the above log messages help to figure out what is wrong?
    Maybe the keys file is not in the right format?
    Ymod not working at all...
    If someone has the same setup as mine – please attach here oscam file.
    Frustrating... :09:

    Quote from canthackit

    Oscam from the top of the page, select your option from the dropdown list.


    they work perfectly ok on your setup.


    regards: canthackit


    I get no response from this link -
    If someone can get oscam dowloads, please attach here the oscam file.

    Somehow I managed to work out oscam and I want to share here my conclusions,
    but quite wird, I do not find out how to insert 'codes' part to the post here???

    I have been told how to add codes with "#" key...
    OK - Finally I managed to work out oscam-emu (the file attached by master G in this thread) so I am sharing my conclusions, for two reasons:
    Help future users facing the same problem, and also to ask for short explanation in order to figure out more deeply –
    I understand in general what I have done, but not what exactly solved the problem.
    Here are the changes have done -


    I added user=user1 in [dvbapi] section to oscam.conf as you can see here:


    Then I added [account] with the same user1 of group=1 to oscam.user:


    Here is oscam.server:


    Here is the status of oscam:


    And log lines:


    I am not sure that all the content of the above files is needed, so I would appreciate short explanation,
    in order to understand the rule of each parameter.
    Regarding oscam-ymod: It did not work at all, without connecting through web, and when I tried to start it from console,
    I got the messages (see in previous post), that indicate on configuration issue -
    'Cannot open config file '/etc/tuxbox/config/oscam.conf' (errno=2)' – While after installation the files are placed in /etc/tuxbox/config/oscam/ directory -
    but not /etc/tuxbox/config/???


    Thanks

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login