Oscam need of CCcam config for Viasat 093E ?

**bluepirre** · Sep 6th 2011

Hi,

Have tried a bit getting my smartreader to work with my 800se, but have a few questions. First of all, do I need to use/change anything in the cccam config when I use Oscam?

I know I have to change some in the oscam.config, server, and user right? Just have to figure out what.

I have configured the smargo smart reader and the dreambox recognises it in device manager.

Im using Newnigma latest image.

Please advise

Sincerely Pierre

**master G** · Sep 6th 2011

Quote

First of all, do I need to use/change anything in the cccam config when I use Oscam?

Delete or # out anything related to cardreader in CCcam.cfg, add an N line or L line to CCcam.cfg depending on what protocol you use in oscam.

Quote

I know I have to change some in the oscam.config, server, and user right? Just have to figure out what.

Tell us what card you are trying to configure and we will find and modify the configs for smargo cardreader.

Quote

Im using Newnigma latest image.

Is oscam+CCcam2.1.3 installed as a combo or separate cams ?

**bluepirre** · Sep 6th 2011

Great, I have the Viasat 093e card.

Right now I´m trying with the CCcam 2.1.4-Oscam combo.
At the moment I´m the only user, do I have to use N or L line in the configs now?
In the future I´ve plans of sharing my card (with my bedroom box:))

**master G** · Sep 6th 2011

Quote

Right now I´m trying with the CCcam 2.1.4-Oscam combo.

If you want to continue using CCcam to control your server you will need to use CCcam2.1.3 and versions below to show the card as HOP0, all other vesions show HOP10.

Quote

At the moment I´m the only user, do I have to use N or L line in the configs now?

Oscam is the cardreader and CCcam controls the server, so the N line or L line will connect the two cams.

You will be able to create C and F lines as normal within CCcam for your peers.

**bluepirre** · Sep 6th 2011

Ok, I´ve read that CCcam isn´t that optimal to use so I rather use another one. Do you know the best cam combo to use for my card?

Further, could you give me an example how the two lines should look in the conf to connect to eachother.

**master G** · Sep 6th 2011

Oscam.conf

Code

global]
usrfile                       = /emu/log/oscamuser.log
logfile                       = /var/log/oscam.log
disablelog                    = 0
disableuserfile               = 1
fallbacktimeout               = 2500
nice                          = -1
maxlogsize                    = 200
preferlocalcards              = 1
saveinithistory               = 1




[monitor]
port                          = 988
nocrypt                       = 
aulow                         = 120
hideclient_to                 = 0
monlevel                      = 0
appendchaninfo                = 0




[newcamd]
port                          = 44445@093E:000000
key                           = 0102030405060708091011121314
allowed                       = 
keepalive                     = 1
mgclient                      = 0




# logging
#pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
maxlogsize = 1000




[webif]
httpport                      = 8080
httpuser                      = username
httppwd                       = password
httprefresh                   = 0
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients           = 0
httpreadonly                  = 0
httpsavefullcfg               = 0

Display More

Oscam.server

Code

[reader]
Label                          = Viasat
enable                         = 1
Protocol                       = mouse
Device                         = /dev/ttyUSB0
services                       =
reconnecttimeout               = 30
CAID                           = 093E
ident                          = 093E:000000
Group                          = 1
EMMCache                       = 1,1,2
ecmcache                       = 1
blockemm-unknown               = 1
lb_weight                      = 200
audisabled                     = 1

Display More

oscam.user

Code

[account]
user                          = user
pwd                           = pass
group                         = 1
au                            = viasat
caid                          = 093E
ident                         = 093E:000000

Here is the N line put it in CCcam.cfg.

N: 127.0.0.1 44445 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

You don`t need to open a port for oscam if you are sharing internally and using as cardreader.

**bluepirre** · Sep 6th 2011

Ok, I will try it these confs within an hour when I get home and let you know how it turns out.

Don´t I need to input the boxid in the server file when using 093e card?

**master G** · Sep 6th 2011

Oscam will read the boxkey on its own, but if you have the line BoxID= in oscam.server you will need to add your boxkey.

Thats why i have removed BoxID so it will read automatically.

When you are testing later view oscam webinfo or log files to see if there are any errors, will help us help you better.

If you dont know how to do this buddy just let us know.

**bluepirre** · Sep 6th 2011

Hey again,

Posting my oscam.log file cause theres no picture yet

---
OSCam cardserver started at Tue Sep 6 17:46:18 2011
-------------------------------------------------------------------------------
2011/09/06 17:46:18 2AAC6C10 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4842 (mipsel-oe-linux)
2011/09/06 17:46:18 2AAC6C10 s version=1.00-unstable_svn, build #4842, system=mipsel-oe-linux, nice=-1
2011/09/06 17:46:18 2AAC6C10 s client max. idle=120 sec, debug level=0
2011/09/06 17:46:18 2AAC6C10 s max. logsize=200 Kb
2011/09/06 17:46:18 2AAC6C10 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/09/06 17:46:18 2AAC6C10 s couldn't open statistics file: /emu/log/oscamuser.log
2011/09/06 17:46:18 2AAC6C10 s auth size=4976
2011/09/06 17:46:18 2AAC6C10 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2)
2011/09/06 17:46:18 2AAC6C10 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/09/06 17:46:18 2AAC6C10 s signal handling initialized (type=sysv)
2011/09/06 17:46:18 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/09/06 17:46:18 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/09/06 17:46:18 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/09/06 17:46:18 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/09/06 17:46:18 2AAC6C10 s monitor: initialized (fd=7, port=988)
2011/09/06 17:46:18 2AAC6C10 s camd33: disabled
2011/09/06 17:46:18 2AAC6C10 s camd35: disabled
2011/09/06 17:46:18 2AAC6C10 s cs378x: disabled
2011/09/06 17:46:18 2AAC6C10 s newcamd: initialized (fd=8, port=44445, crypted)
2011/09/06 17:46:18 2AAC6C10 s CAID: 093E
2011/09/06 17:46:18 2AAC6C10 s provid #0: 000000
2011/09/06 17:46:18 2AAC6C10 s cccam: disabled
2011/09/06 17:46:18 2AAC6C10 s radegast: disabled
2011/09/06 17:46:18 2AAC6C10 s http thread started
2011/09/06 17:46:18 2AAC6C10 s creating thread for device /dev/ttyUSB0
2011/09/06 17:46:18 2AAC6C10 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/06 17:46:18 2AAC6C10 s waiting for local card init
2011/09/06 17:46:18 2C6334B0 r reader thread started (thread=2C6334B0, label=viasat, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/09/06 17:46:18 2BE334B0 h HTTP Server listening on port 8080
2011/09/06 17:46:20 2AAC6C10 s init for all local cards done
2011/09/06 17:46:20 2AAC6C10 s anti cascading disabled

Please advise

**master G** · Sep 6th 2011

There are no errors to correct, can't open file is nothing to worry about as those oscam files are not needed to connect to CCcam.

Have you added the N line to CCcam.cfg and removed anything relating to cardreader ( boxkey & smartcard clock frequency ) ?

**bluepirre** · Sep 6th 2011

The only things allowed in cccam config below

#N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)> <stealth mode (default: 0)>
#
# example:
#
N: 127.0.0.1 44445 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
#
# add a newcamd card, give it an offset of 2 hops, in the share list
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2
#
# stealthy login on newcamd server:
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1
#
# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic

# uper slot with newcs
N: 127.0.0.1 34001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
# lower slot with newcs
N: 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
# mpcs for 1833to1702
N: 127.0.0.1 15000 mpcs dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

and

#SERIAL READER : /dev/tts/0

#Smargo USB Support
SERIAL READER : /dev/usb/tts/0 smartreader+
#SERIAL READER : /dev/usb/tts/1 smartreader+

**master G** · Sep 6th 2011

Quote

SERIAL READER : /dev/usb/tts/0 smartreader+

# out this line and restart the cam.

In CCcaminfo can you see then N line active like this ? ( port 10000 will be yours 44445 )

**bluepirre** · Sep 6th 2011

Sorry, but where do I find the cccam info details, I've installed the plugin and all but cant find where to access it.

**master G** · Sep 6th 2011

In CCcam.cfg allow these;

ALLOW WEBINFO: yes
WEBINFO USERNAME :root #( change to your own )
WEBINFO PASSWORD :dreambox #( change to your own )

Try using CSstudio, its a much better tool for CCcam.

**bluepirre** · Sep 6th 2011

Yes I did like this:

#ALLOW TELNETINFO: no
ALLOW WEBINFO: yes

# Show extended client info when showing client list
# default is yes
#
#SHOW EXTENEDED CLIENT INFO : no

# The webinfo service can be protected with a username and password.
# This is switched off by default
#
WEBINFO USERNAME : xxxxx
WEBINFO PASSWORD : xxxxx

And installed CS studio,

But this is what I get:
1 0.0% 127.0.0.1:44445 <> ? -- OFFLINE -- - -
2 0.0% 127.0.0.1:34001 <> ? -- OFFLINE -- - -
3 0.0% 127.0.0.1:34000 <> ? -- OFFLINE -- - -
4 0.0% 127.0.0.1:15000 <> ? -- OFFLINE -- - -

**master G** · Sep 6th 2011

Have you setup the smargo with the windows tool that came with it to dreambox mode ?

**bluepirre** · Sep 6th 2011

Yes I have and my box finds it under "Devicemanager"

Mode:Autoswitch
Kernel: Dreambox
Device: ttyUSB0
Firmvare v1.3
nan Mhz

What was new that happend on the screen now is that up on the left corner says: I S N V CO BC CW DCNDS with NDS highlighted.

Oscam need of CCcam config for Viasat 093E ?

master G May 3rd 2020

OSCam Support Forum

Participate now!

Share

Tags