Hello,
When doing a blind scan I use the default symbol rate of 0002000000 to 0045000000 is this OK or is there a better range to set ?
TTfn
G :)
Hello,
When doing a blind scan I use the default symbol rate of 0002000000 to 0045000000 is this OK or is there a better range to set ?
TTfn
G :)
seems to be the "norm"...
I just found this info from a duo user( javier007 ):
scan start frequency 0950000000 = should be frequency 9500 and so if the feed is 12300 for example then it would be=1230000000
scan start symbolrate 0002000000=2000 so if the feed was sr 6100 it would be=0006100000 and if it is sr 14400 it would be 0014400000
If time permits I´m going to give it a try the weekend ..
lets know your results ;)
I have an older version of vix but can't even find a blind scan option, is it not available on vix or only on newer versions?
Dont know shamonemf as i'm running BH 1.6.4, sorry.
Thanks for that cazuela :)
TTfn
G:)
Sorry to hijack but updated the software and still cant see the option to blindscan?
Cheers
Hello,
Try, menu button>plugins>blindscan
TTfn
G :)
Not showing there, must need to add it first but don't know where from.
Found it, it needed installing from system plugins.
Got me stumped wont even find known active signals.
Any update grizz??
Have you checked to make sure you are on the satellite, second one down, use the < > on the remoteto change
TTfn
G:)
can you upload some captures grizz ,please?
Yes mate scanned all 28.2e whilst on tha sat and nothing, as caz says screen grabs and a tut would be brillant.
shamonemf-- you wont find feeds on 28º ..you need to go to 10ºe or 30ºw,, for example..
I did it on 28.2 as well as others just to see if it picked anything up, I scanned the whole band but noting.
28.2e does have feeds evry so often btw.
Nice may need to put bh back on and give it a go, unless its just for uno??
Do me a screen grab of the settings page before you scan so I can see I'm setting it up right.
Can anybody else using a duo or solo please confirm you also have this working please, is it a uno thing only??
Don’t have an account yet? Register yourself now and be a part of our community!