Today i had to reload everything on my box but i cant seem to work the turner out,
i have the twin one and want it set up to uk channels can anyone help me to what it should be set up as?
Today i had to reload everything on my box but i cant seem to work the turner out,
i have the twin one and want it set up to uk channels can anyone help me to what it should be set up as?
what image and version buddy?
Fixed dish to UK??
Blackhole. Yea fixed uk dish
Two channel record and watch
Twin tuner setup on vu+duo help
FTP the catseye ipk into var/volatile/tmp.
then TELNET:
Quoteopkg install -force-overwrite /tmp/*.ipk
reboot box.
Menu-setup-service sewarching-AutoBouquets (28.2E)
Set it up for your region ,etc....
Green to start.
job done
i have the channels and everything set up on one, but i cant seem to set both up right to watch and record etc
i have the channel list etc all set up,
will this still fix that problem?
also my harddrive always dropped out is this a normal problem
If you have your tuner configuration setup correctly then you should be able to watch one channel & record another.... are you using your own card or a share to view premium channels? if your using a CCcam as your emulator then you need to be using version 2.3.0 with the newer images.
Is the hard drive mounted correctly??? blue button twice on the remote and then select devices manager, press red for mountpoints and then choose media/hdd to mount the hdd correctly.... full restart required after that.
i can only record one channel and not watch anything else using a share with ccam
- - - Updated - - -
also i dont have anything in mountpoints
How exactly are the tuners setup??? please post what configuration you are using on tuner A & B..... they should be identical.
Are you using CCcam 2.3.0 ???
Yea ccam 2.3.0.
If i set tuner a to the same as B i dont get any signal or channel from a.
If you don´t get anything in A then it begs the question ..have you got two cables running from lnb to both tuners?
Why have you got B as the main tuner?
i would have set A up first then B..
Have you tried all the config modes?? i.e: " B equal to A " ??
Just set a as the same as b. But then check the signal and its jumping between 0 and 20%
If you have a fixed dish on 28e bud then you just set the configuration mode to "simple" then single, on both tuners......
Think i sorted both now. Thanks for your help.
What do i do about the harddrive
Think i sorted both now. Thanks for your help.
What do i do about the harddrive
Follow the advice I gave you in post #6
I try that but their was nothin in the mountain point
Have you tried initializing the HHD first before you mount it???
Press menu/system/hard drive/initialization.....
Don’t have an account yet? Register yourself now and be a part of our community!