After installing the image using filezilla and Putty telnet using this command : cd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot, the dm booted right up. I then did a channel search on 0.8W. Everything went well until I wanted to do a reboot after hiding "Games" in the settings menu.
Now it won't reboot. After a while it turns itself off. Also, I tried to connect with filezilla before it got a chance to turn itself off but connection was not found.
I also pulled the power plug for 30 minutes and tried to reboot -but with the same result.
Now what??
Any ideas
HELP! My DM500S won't reboot after installing Commando 15.0d
- BadBlake
- Thread is marked as Resolved.
-
Try flashing image with dreamup
Using null(232) cable
Preferably using an old desktop PC, as laptops with USB/232 cables are very temperamental m8 -
If you don't have any communication with the receiver over the network, your only option is to reflash an image with dreamup and a rs232/null modem cable.
-
master G
Moved the thread from forum DM500 - DM500s Support to forum Enigma1 Support.
Your dedicated resource for Enigma1 Dreambox support.
Access downloads and troubleshooting for the DM500, DM600, and DM7020 legacy models. Support and downloads for classic Dreamboxes. Keep your DM500, DM600, or DM7020 running with Enigma1 software and community help.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
