Hello
I just received a Danish Canal Digital card, and updated my DM7020HD V2 to Newnigma v4.0.12 and installed CCcam 2.3.0. But I can not get the card to work is there anything I need to change in CCcam.
Canal Digital
-
- Various Support
- zz2011
- Thread is marked as Resolved.
-
-
Convert the serial number from the official receiver to get the box key, then add to CCcam.cfg..
Use this tool to convert the box key => Dreambox Config Creator
-
HI
Thanks for reply
It will not work
Now my CCcam,cfg looks like this, what am I doing wrong, are there other files that will have to be changed.Code
Display More#This config was created using the Dreambox Config Creator. #Designed & Written by B16MCC SERVER LISTEN PORT : 12000 ALLOW TELNETINFO: yes ALLOW WEBINFO: yes WEBINFO USERNAME :root WEBINFO PASSWORD :dreambox WEBINFO LISTEN PORT : 16001 TELNETINFO USERNAME :root TELNETINFO PASSWORD :dreambox TELNETINFO LISTEN PORT : 16000 ZAP OSD TIME :0 OSD USERNAME :root OSD PASSWORD :dreambox OSD PORT :80 SHOW TIMING : yes DEBUG : yes NEWCAMD CONF : no #DISABLE EMM : yes #EXTRA EMM LEVEL : yes SHOW EXTENEDED CLIENT INFO : yes MINI OSD : no #MINIMUM DOWNHOPS: 1 CHANNELINFO FILE : /var/etc/CCcam.channelinfo PROVIDERINFO FILE : /var/etc/CCcam.providers CAID PRIO FILE : /var/etc/CCcam.prio LOG WARNINGS : /var/log/warnings.txt SOFTKEY FILE : /var/keys/SoftCam.Key AUTOROLL FILE : /var/keys/AutoRoll.Key STATIC CW FILE : /var/keys/constant.cw SMARTCARD CLOCK FREQUENCY : /dev/sci1 3430000 SMARTCARD CLOCK FREQUENCY : /dev/sci0 3430000 BOXKEY : /dev/sci1 xx xx xx xx BOXKEY : /dev/sci0 xx xx xx xx
-
CCcam.cfg looks good, you don`t need anything else configured there..
Connect to CCcamInfo in a browser window like this http://ip.address.of.7020hd:16001
Click on the entitlements tab > Is the card being read and do you have valid entitlements ?
We could try oscam next if you want buddy..
-
Do you picture when the card is in the original box?
Is it active?
What say CCcam when you look at 192.168.x.xxx:16001?
More says you should stay away from v 2.3I agree, OScam works much better, try it. Complete files to CD is here, I know they work because I have shared mine.
-
There are fine picture on when the card is in original box.
CCcam say when 192.168.x.xxx:16001
card reader /dev/sci0
handled 0(0) ecms and 0(0) emmsConax card
Caid b00
id name date
6010 6010 20.01.15-07.02.15
01.01.90-01.01.90
6020 6020 20.01.15-07.02.15
01.01.90-01.01.90
6030 6030 20.01.15-07.02.15
01.01.90-01.01.90
6040 6040 20.01.15-07.02.15
01.01.90-01.01.90
6050 6050 20.01.15-07.02.15
01.01.90-01.01.90
6060 6060 20.01.15-07.02.15
01.01.90-01.01.90
6070 6070 20.01.15-07.02.15
01.01.90-01.01.90
6080 6080 20.01.15-07.02.15
01.01.90-01.01.90
8010 8010 20.01.15-07.02.15
01.01.15-31.01.15
8011 8011 20.01.15-07.02.15
01.01.15-31.01.15
8012 8012 20.01.15-07.02.15
01.01.90-01.01.90
8013 8013 20.01.15-07.02.15
01.01.90-01.01.90card reader /dev/sci1
no or unknown card inserted -
Hi,
Check CCcam 192.168.x.xxx:16001, -> Shares (Jeg er fra Denmark)Mvh
Arsha -
Hej Arsha
Is it this line
/dev/sci0 |sci | b00|conax |0 |0 11 |
-
Do you watch TV from the DM7020HD V2 or must share with others?
If it's the one you should see, I do not think you get started CCcam, select it from cam`s under "blue button" menu.
Otherwise, try another version, or even better with Oscam
-
I watch TV from the DM7020HD no share.
I have started CCcam from the Blue button.
Available shares: 1
+----------------------+--------+----+-------+----------+-------+-------+
| Host | Type |Caid| System| Providers|Uphops | Nodes |
| | | | | |Maxdown| |
+----------------------+--------+----+-------+----------+-------+-------+
|/dev/sci0 |sci | b00|conax |0 |0 11 | |
+----------------------+--------+----+-------+----------+-------+-------+
CCcam Support Forum
Configs, discussion, downloads and guides for CCcam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!