Hi,
I've just bought a ZGemma Star 2S box, am I right in thinking it's similar to a Cloud ibox 2? I've tried downloading the OpenViz image from zgemma.tv and putting the extracted folder on an 8gb dongle, stuck it in the back and booted up, nothing happens though I get the Open ATV splash screen and no more.
What am I missing here?
Sorry if this has been posted before, but I can't find much info about the ZGemma unit.
Thanks,
Hopefully the attached pdf will help buddy.
ZGemma H1 & ZGemma Star 2S Update Steps..
Thanks for the help, I'm still having problems... hit by the first hurdle.
I've got an 8GB USB stick which I've formatted to FAT32, using both the quick and the slow format methods.
I've downloaded a few OpenVIZ images from zgemma.tv, unzipped and copied the folder over to the USB, then stuck it in the back of the box, it says boot, then counts up to 100 with the Open ATV splash screen it never once say's USB on the display, I've even tried a different USB and different images, still the same.
I know the USB stick and port must be working, because it puts a few folders in there once I've booted it up, Timeshift and something else.
Can you help me, I'm really struggling with this!
- - - Updated - - -
I've read somewhere that I can try and flash with the bootloader from the zgemma tv site, because tspanel can sometimes mess things up?
You need to hold the power on/off button for 3-4 seconds once it loads 100 percent to detect USB and start loading the image.
You dont need to hold the power button in at all, place the USB stick with image on in the rear USB slot switch the receiver on with the little white rear power switch the display will read -USB- now press the power button just once and then the display should read FLSH if it does not then there is a problem with either your USB stick or the Image
I have the same problem :-) Did you find the solution?
You dont need to hold the power button in at all, place the USB stick with image on in the rear USB slot switch the receiver on with the little white rear power switch the display will read -USB- now press the power button just once and then the display should read FLSH if it does not then there is a problem with either your USB stick or the Image
I had the same problem and this is the solution. Thanks a lot :)
Some usb sticks when flashing these boxes don't work for some reason...
Some usb sticks when flashing these boxes don't work for some reason...
Use sticks less than 4gb in size and use a good name brand. Personally found the maplins own brand sticks bullet proof.
I have just bought zgemma-star 2s box and there is no usb on the back of the box only on the front having trouble trying to get a gift on it must be easy if you know how to do it any help would be welcome
millybot1
pps yes there is a usb on the back message to me put your glasses on
millybot
If you mean by a GIFT a service from a payserver then i doubt you will get help
If you mean by a GIFT a service from a payserver then i doubt you will get help
Yep thats exactly right bud...... @ millybot1 please read the forum rules for your own benefit buddy. We don't offer support to anyone that uses a Payserver or Gift.
ive tried 3 usb sticks and it still will not load from usb
Try kingston or sandisk I flashed one and used a kingston and it flashed no problem -are you using rear USB port
Hi,
I don't know if this matters or not but the folder named zgemma needs to go on the usb stick.
Try kingston or sandisk I flashed one and used a kingston and it flashed no problem -are you using rear USB port
kingston worked in mine :)
