Vu+ Solo 2 - Cccam and Canal Digital Norway (Nordic)

There are 30 replies in this Thread which was already clicked 11,678 times. The last Post () by yurgh.

    Quote from stevejo

    Im not 100% sure about that budd , but im sure i saw something and with the issues you are having i might be right ,Have a look on streamboard , but i see you tried cccam Im sure you must NOT have spaces in the boxkey, also you should not post it online as you can be seen that way


    Quote from stevejo

    I thought these cards were paired now im sure ive seen something on streamboard about not being able to read them ?


    no canal digital is not paired ,but viasat is. you can use it on any box. I´m using it on VU+Solo and no problem.

    Quote from darius

    no canal digital is not paired ,but viasat is. you can use it on any box. I´m using it on VU+Solo and no problem.


    Ive tried with all kind of different settings, but still no luck, how have you configured it? it works fine as soon as i put it in my orginal CD tuner, but when in VU+ it doesnt work.


    Ive tried using both CCCAM and OSCAM, but dont get any pictures. Maybe you can share you config with me?

    what way are you putting the card in the box?


    - - - Updated - - -


    /dev/sci0 is bottom slot chip down /dev/sci1 is top slot chip down


    - - - Updated - - -


    I see nothing about the card except detected what means its in can still not be right

    Newer cd card does not work with CCcam, it is only oscam that works!


    Use the attached files, it is something that works 100%.


    -contains an ipk. file that you first installs.
    -start oscam.
    -overwrite all files in etc/tuxBox/config with attached files.
    -file named oscam.service deleted.
    - Restart oscam again and your card will work.


    - - - Updated - - -


    (it's the same config to /dev/sci0 and /dev/sci1 so it does not matter where you insert the card)


    Thanks a lot!!! This worked!! Finally!!

    Hello. Does the config files work on other linux receivers/images also, or only vu+ /blackhole. I´m asking because i have tried replacing default oscam configs with the ones uploaded in this thread with no luck. I am on latest openATV image.


    Thank you in advance

    buenso
    All config files should work on any box and image,
    But ipk.fil is in the package is only for Black Hole!


    -Are not familiar with openATV image, you are sure that files located in etc/tuxBox/config and not only in etc?
    -Have you remembered to restart oscam after files placed?


    -Which edition of oscam and what appears in your log?

    Quote from hacked

    buenso
    All config files should work on any box and image,
    But ipk.fil is in the package is only for Black Hole!


    -Are not familiar with openATV image, you are sure that files located in etc/tuxBox/config and not only in etc?
    -Have you remembered to restart oscam after files placed?


    -Which edition of oscam and what appears in your log?


    Hello and thank you very much for your reply. There is no config folder in etc/tuxbox but the config files are in etc as you say. (i have replaced them with the ones posted) oscam restarted without luck(also tried restarting interface and power on/off)
    About the version of oscam i have tried all availible versions in tspanel
    Should i create a config folder in etc/tuxbox manually and move them there?
    How and where do i activate the log?

    HackeD: OpenATV apparently has a different file structure than blackhole and openvix. I ended up flashing openvix. Thanks for the config package


    - - - Updated - - -


    Last question: Is it possible to assign a specific emu to one channel or package in openvix?

    Hi there.
    I have a problem reading my card.
    can anyone here see whats wrong?



    2015/11/19 00:02:23 76D00690 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0B00 PROVID 000000 ECMPID 0064 PMTPID 0260 (NO MATCHING READER)
    2015/11/19 00:02:23 76D00690 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 1 ecmpids!
    2015/11/19 00:02:23 76D00690 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
    2015/11/19 00:02:24 76D00690 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0B00 PROVID 000000 ECMPID 0064 PMTPID 0260 (NO MATCHING READER)
    2015/11/19 00:02:24 76D00690 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 1 ecmpids!
    2015/11/19 00:02:24 76D00690 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
    2015/11/19 00:02:25 76D00690 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0B00 PROVID 000000 ECMPID 0064 PMTPID 0260 (NO MATCHING READER)
    2015/11/19 00:02:25 76D00690 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 1 ecmpids!
    2015/11/19 00:02:25 76D00690 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
    2015/11/19 00:02:26 76D00690 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0B00 PROVID 000000 ECMPID 0064 PMTPID 0260 (NO MATCHING READER)
    2015/11/19 00:02:26 76D00690 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 1 ecmpids!
    2015/11/19 00:02:26 76D00690 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
    2015/11/19 00:02:26 76D00690 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0B00 PROVID 000000 ECMPID 0064 PMTPID 0260 (NO MATCHING READER)
    2015/11/19 00:02:27 76D00690 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 1 ecmpids!
    2015/11/19 00:02:27 76D00690 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
    2015/11/19 00:02:27 76D00690 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0B00 PROVID 000000 ECMPID 0064 PMTPID 0260 (NO MATCHING READER)
    2015/11/19 00:02:28 76D00690 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 1 ecmpids!
    2015/11/19 00:02:28 76D00690 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
    2015/11/19 00:02:28 76D00690 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0B00 PROVID 000000 ECMPID 0064 PMTPID 0260 (NO MATCHING READER)
    2015/11/19 00:02:29 76D00690 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 1 ecmpids!
    2015/11/19 00:02:29 76D00690 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
    2015/11/19 00:02:29 76D00690 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0B00 PROVID 000000 ECMPID 0064 PMTPID 0260 (NO MATCHING READER)
    2015/11/19 00:02:29 76D00690 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 1 ecmpids!

CCcam Support Forum

Configs, discussion, downloads and guides for CCcam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login