I am configuring the channels for sat but this morning it is not letting me entering the webinterface
I checked the ip from system/system info and using port : 9981 (192.168.1.64:9981) but the web interface is not opening,
pinging the ip is ok
rebooted box, modem, router just in case, tried uninstalling and reinstalling tvheadend but still :S
I was following this guide :
http://linuxsat-support.com/showthread.php?t=78016
Quotefirst you need install tvheadend http://linuxsat-support.com/showthre...684#post255684 if you have already install it skip this step
with wetek build do you use, can you check if vdr-addon is enable ? if you use tvheadend then must vdr-addon disable
ok managed to find it from
get add-ons
openelec mediacenter os addons
services
vdr-addon
(downloaded and enabled)
dunno how I was able to access it before.... as long as it works now will continue with setting up the stuff :)
dejv did you try to reboot device, as it is strange or maybe browser gone crazy
fixed the issue with the above post.
and have tried with chrome/internet explorer, tried clearing cache of both browsers, rebooted box + laptop. somehow the vdr got disabled :S
update: the adapters are not showing, any ideas ? :S
I am sure mine was the same when I first used tvheadend, I setup a network then they appeared
configured the networks on 13e and 28.2 but still having the tv adapter empty :S
with wetek version are you use
this look like there are 2 servers running
tvheadend and vdr-addon are servers if vdr is runnen then see tvheadend no dvb card because vdr-addon use the card
OpenELEC/microSD/OE-Kodi-15-Isengard version have standard enable vdr-addon that is why i asked with version are you using
update: rebooted box and tuner came up.
now getting:
I have 2 lmbs LMB1 - 13e and LMB2-28.2e
I'm not sure if this will make a difference but when you were configuring the DVB-S networks have you selected the correct satellites in the 'Pre-defined muxes' drop down menu.
From your screenshots it looks as though you haven't. Try doing so and see if that fixes the problem you're having
