No longer reading 0963 card

There are 10 replies in this Thread which was already clicked 1,872 times. The last Post () by stevejo.

    My card is no longer read in oscam r1124.


    Start up log & reader config below if anyone can see whats wrong or offer any help


    Tested card still working in DRX890 ??


    015/03/11 21:49:49 56E818 r ***UK [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
    2015/03/11 21:49:49 56E818 r ***UK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
    2015/03/11 21:49:49 56E818 r ***UK [internal] Calculated work ETU is 26.87 us reader mhz = 450
    2015/03/11 21:49:49 56E818 r ***UK [internal] ATR Fsmax is 5 MHz, clocking card to 4.50 (specified in reader->mhz)


    2015/03/11 21:49:51 56E818 r ***UK [internal] card system not supported
    2015/03/11 21:49:51 56E818 r ***UK [internal] Normal mode failed, reverting to Deprecated Mode
    2015/03/11 21:49:52 56E818 r ***UK [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
    2015/03/11 21:49:52 56E818 r ***UK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
    2015/03/11 21:49:52 56E818 r ***UK [internal] Calculated work ETU is 107.47 us reader mhz = 450
    2015/03/11 21:49:52 56E818 r ***UK [internal] ATR Fsmax is 5 MHz, clocking card to 4.50 (specified in reader->mhz)
    2015/03/11 21:49:56 56E818 r ***UK [internal] card system not supported
    2015/03/11 21:49:56 56E818 r ***UK [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
    2015/03/11 21:49:56 56E818 r ***UK [internal] card initializing error
    2015/03/11 21:49:57 0 s init for all local cards done
    2015/03/11 21:49:57 0 s anti cascading disabled
    2015/03/11 21:49:57 5F0950 c plain dvbapi-client granted (linuxsatsupport, au=off)
    2015/03/11 21:49:57 5F0950 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
    2015/03/11 21:49:57 5F0950 c [ADD PID 0] CAID: 0963 ECM_PID: 0501 PROVID: 000000
    2015/03/11 21:49:57 5F0950 c [ADD PID 1] CAID: 0961 ECM_PID: 0501 PROVID: 000000
    2015/03/11 21:49:57 5F0950 c [ADD PID 2] CAID: 0960 ECM_PID: 0501 PROVID: 000000
    2015/03/11 21:49:57 5F0950 c [ADD STREAM 0] CAID: 0963 ECM_PID: 0501 PROVID: 000000
    2015/03/11 21:49:57 5F0950 c [ADD STREAM 1] CAID: 0961 ECM_PID: 0501 PROVID: 000000
    2015/03/11 21:49:57 5F0950 c [ADD STREAM 2] CAID: 0960 ECM_PID: 0501 PROVID: 000000
    2015/03/11 21:49:57 5F0950 c Found 3 ECMpids and 1 STREAMpids in PMT
    2015/03/11 21:49:57 5F0950 c [DVBAPI] Receiver wants to demux srvid D017 on adapter 0000 camask 0008 index 0003 pmtpid 010C
    2015/03/11 21:49:57 5F0950 c New program number: D017 (Sony Entertainment +1 UK) [pmt_list_management 3]
    2015/03/11 21:49:57 5F0950 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 0963 PROVID 000000 ECMPID 0501 ANY CHID PMTPID 010C VPID 0935



    [reader]
    label = ***UK
    protocol = internal
    device = /dev/sci0
    services = *** digital (uk)
    caid = 0963
    detect = cd
    mhz = 450
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-g = 1
    saveemm-u = 1
    saveemm-s = 1

    Was a bad idea putting it into a drx 890 chances are its now lost you will just get family pack


    - - - Updated - - -


    Thid card should still read make sure you are using the correct settings on the reader might need to be 2700 mhz with auto speed enabled like dm 500 need for example

    Quote

    Are you sure it's oscam version r1124 ???????


    Probably modern rev no. Actual oscam may be 9875.
    Did anything change which led to this (new card /entitlements run out/ order extra channel etc) before you decided to insert it into original receiver for testing?
    Was your card always paired to the drx 890 (I think I remember reading that this has happened with cards paired to hd receivers without ever being placed in the receivers but may be mistaken)
    Only asking these questions to narrow the cause so other users may not get caught with the same problem.
    You could try and upgrade oscam to a newer version but i doubt it will help as your more than likely paired at this stage since you inserted in the receiver. (only takes an instant as far as I know)
    Only other way out of it is to try and get your card paired to sd receiver i'm afraid, and i dunno if they will do this anymore tbh.

    iBffBYU.png

    Edited once, last by codar ().

    This card should still 100% read in oscam as the ATR 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
    is that of SYAV-40LF card what will read in a box standard oscam , the worst that may occur is only getting the family pack with you saying it works in the DRX-890 it hasnt lapsed so please help us with more information on what box you have it setup in and oscam version ,this seems to be just a setup issue

    I'd agree steve, the card should still be read (especially if the op didn't changed anything and it happened overnight / all of a sudden) , i'm just wondering if something more is at play here (with new entitlements rumored not to show dates maybe, only guessing though)
    I hope it's only a setup issue.
    More info is definitely required.
    Full configs, and receiver details for starters.

    iBffBYU.png

    Edited 2 times, last by codar ().

    I dont think so buddy because it will still read the rom is the same ,we dont even know if his box has a root password could be a few things ,if it was anything else there would be more than 1 case most card have not long updated till may

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login