edit the netid in autobouquets_c2.sh
with just 4 digts for your area
then scan
example
# 40965 (0xa005) "Knowsley 1"
netid="a0 05"
What have you set your tuner as?
Have you performed a scan? AB C2 needs to be on a cable channel to work.
Have you installed DVBsnoop?
What is your tuner configured as?
Do you have an active signal where receiver is located?
You do not need to chnge tuner priorities or disable teh satellite ones. Enigma2 will select the correct tuner as required. Any greyed out chanenels means that those channels are unavialable because the tuner has no access to them owing to a config issue or otherwise occupied.
If the tuner was faulty, you would not be able to scan them in. I suspect you have misconfigured your tuners.
if they are greyed out
its the cable.xml
xml not right or in the wrong place
for blackhole
cable.xml goes in /etc/tuxbox
main plugin folder 755
.sh files always 755
Display MoreFinally done it
Ftp autobouquets C2, changed attributes folder and everything inside to 744
Did bruteforce scan which picked up 109
Went on live channel ran
autobouquets C2 for my area
Picked up just over 1000 channels
All freeview SD channels work fine but freeview HD channels don't work,
Does anybody know if they should work
There are no Free HD channels on Cable everything is encrypted in HD including what is free on say 28.2° east like BBC1 HD and ITVHD.
The only free channels are the SD ones in the FTA SD bouquet which equates to Channel 1-5 and a few variation's
Display MoreFinally done it
Ftp autobouquets C2, changed attributes folder and everything inside to 744
Did bruteforce scan which picked up 109
Went on live channel ran
autobouquets C2 for my area
Picked up just over 1000 channels
All freeview SD channels work fine but freeview HD channels don't work,
Does anybody know if they should work
No HD is ftv on vm
& only a ltd few SD are ftv
sky sports 2 is
is called sky world cup
while the cricket is on
Don’t have an account yet? Register yourself now and be a part of our community!
