Hi folks,
Im new to the forum and to the Nbox 5800sx. previously i have had DM800hd, DM500s and have never had a problem getting them up and running.
I didnt realise that the nBox doesnt work with CCcam, which is why im needing assistance.I have read the previous threads on this and tried to follow the instructions given but its not happening for me.
I would need step by step advice,where to put what file etc. I just need to unlock a n line nothing else.
Any help would be greatly appreciated,
thanks in advance.
Totally lost, help needed.
- redsky
- Closed
- Thread is marked as Resolved.
-
-
this worked for me
Change the values and copy to var/keys/ oscam.server using dcc[reader]
label = remote
description = CCcam Example
reconnecttimeout = 5
protocol = cccam
device = DNS GOES HERE, PORT GOES HERE
user = USERNAME
password = PASSWORD
group = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
caid =
cccversion = 2.1.4 -
Thanks al70,
I just tried it with my own line but still no joy, i must be doing something wrong.Do i need to put the 1-14 number anywhere. -
Thanks al70,
I just tried it with my own line but still no joy, i must be doing something wrong.Do i need to put the 1-14 number anywhere.Yes you do! What image are you running?
-
Hyperian 4 was on the box when it came.
-
Use CCcam2Oscam to convert the N line to a [reader]. This tool will save it as oscam.server file, or copy the config and save it into the attached oscam.server..
You also need to use an oscam.conf and oscam.user file which has been configured for dvbapi/viewing (included in the attachment)..
FTP oscam.conf, .server and .user configs to /var/keys folder..
-
Hyperian 4 was on the box when it came.
How to setup and configure Oscam for use with your clines.
First click Menu -> PluginsNow click the Green button to Download Plugins
Click on EMU
Select and Install config oscam and sh4CAM
Next select and Install Oscam 7750 bin only once installed you may exit the Menu
Now you will need to run DCC, and transfer your converted oscam.server file over to the nBox,
click /var/keys and transfer over your oscam.server file, which should now contain your cline dataClick the Blue button twice and select EMU: oscam 7750
you should also Enable Mapping, by pressing the up arrow on your remote.[reader]
label = <anything>
protocol = newcamd
key = 0102030405060708091011121314
device = DNS_address,port_number
account = username,password
group = 1
fallback = 1 -
Thanks guys,
That worked a treat, i was about to give up.
Happy days -
Good stuff, glad it`s sorted buddy.
Thread closed..
-
master G
Moved the thread from forum nBox 5800S | SX HD Support to forum nBox 5800S | SX HDTV [BSKA HD TNK].
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!