mgcamd -> cccam Server: problems with HD+

_dYna_ · Mar 28th 2015

Hello,

recently i have some problems with HD+ (Sky HD works flawlessly)
The picture comes and goes.
As can be seen in the logs, sometimes i can connect, sometimes i don´t.
I don´t know wether it is a problem of the server, or a config issue on my side.

Logs:

Code

[cccamd] My nodeID aba3f840a881d7e
[cccamd] =============== Connecting to SERVER:19702... ===============
[cccamd] Connected to SERVER:19702 as USER (57ms)
[cccamd] Login to SERVER:19702 as USER accepted (94ms)
[cccamd] Server intro from SERVER:19702
[cccamd] Server NodeID 1122334455667788 version 2.1.2
got 561 cmd 9F
[mg0] namespace 0 t-id 0 on-id 0
[mg0] descramble on 1, source 0
[mg0] service EF75 index 0 pmt pid 61 (1), pids: video 0x01FF, audio  0x0021 0x0203
[mg0] ECM: CaID: 0x1830  -> CaPID: 0x1CEC ProvID: 000000
[mg0] ECM: CaID: 0x1843  -> CaPID: 0x19EC ProvID: 000000
[mg0] ECM: CaID: 0x098C  -> CaPID: 0x1AEC ProvID: 000000
[mg0] ECM: CaID: 0x1860  -> CaPID: 0x1EEC ProvID: 000000
[mg0] ECM: CaID: 0x186A  -> CaPID: 0x1DEC ProvID: 000000
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2849ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2852ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] <- CW from cccamd SERVER:19702 (163ms)
[mg0] 163 msec -- Sat Mar 28 12:07:57 2015
system: Nagra
caid: 0x1830
pid: 0x1cec
prov: 000000
cw0:0 49 B6 E1 E0 66 72 E5 BD
cw1:0 19 B7 C4 94 81 60 65 46
[mgcamd] emm started
*EMM: CaID: 0x1830  -> CaPID: 0x1003 ProvID: 000000
*EMM: CaID: 0x1843  -> CaPID: 0x1005 ProvID: 000000
 EMM: CaID: 0x09C4  -> CaPID: 0x1008 ProvID: 000000
 EMM: CaID: 0x098C  -> CaPID: 0x1008 ProvID: 000000
*EMM: CaID: 0x1860  -> CaPID: 0x1007 ProvID: 000000
*EMM: CaID: 0x186A  -> CaPID: 0x1013 ProvID: 000000
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] <- CW from cccamd SERVER:19702 (122ms)
[mg0] 122 msec -- Sat Mar 28 12:07:57 2015
system: Nagra
caid: 0x1830
pid: 0x1cec
prov: 000000
cw0:0 8E 2D D3 8E F7 8B 95 17
cw1:0 19 B7 C4 94 81 60 65 46
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2844ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2849ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2847ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] <- CW from cccamd SERVER:19702 (527ms)
[mg0] 527 msec -- Sat Mar 28 12:08:11 2015
system: Nagra
caid: 0x1830
pid: 0x1cec
prov: 000000
cw0:0 8E 2D D3 8E F7 8B 95 17
cw1:0 E4 90 DB 4F BE 87 33 78
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] <- CW from cccamd SERVER:19702 (356ms)
[mg0] 356 msec -- Sat Mar 28 12:08:12 2015
system: Nagra
caid: 0x1830
pid: 0x1cec
prov: 000000
cw0:0 E5 8B FD 6D BE 57 3C 51
cw1:0 E4 90 DB 4F BE 87 33 78
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2844ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2848ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2847ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] <- CW from cccamd SERVER:19702 (186ms)
[mg0] 186 msec -- Sat Mar 28 12:08:25 2015
system: Nagra
caid: 0x1830
pid: 0x1cec
prov: 000000
cw0:0 E5 8B FD 6D BE 57 3C 51
cw1:0 A6 8F 68 9D 99 3A 75 48
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2847ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2853ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2849ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2846ms)
[mg0] network can't decode
[mg0] pid 0x1CEC failed to decode.
[mg0] network can't decode
[mg0] pid 0x19EC failed to decode.
[mg0] network can't decode
[mg0] pid 0x1AEC failed to decode.
[mg0] network can't decode
[mg0] pid 0x1EEC failed to decode.
[mg0] network can't decode
[mg0] pid 0x1DEC failed to decode.
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2850ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2848ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2852ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] <- CW from cccamd SERVER:19702 (129ms)




[mg0] WARNING, both cws changed !
[mg0] 129 msec -- Sat Mar 28 12:08:49 2015
system: Nagra
caid: 0x1830
pid: 0x1cec
prov: 000000
cw0:0 41 17 6D C5 E3 98 AD 28
cw1:0 9F A7 F0 36 F3 41 58 8C
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2848ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] cccamd route SERVER:19702 cant decode (2859ms)
[mg0] -> ECM to cccamd SERVER:19702 (00000088)
[mg0] <- CW from cccamd SERVER:19702 (137ms)
[mg0] 137 msec -- Sat Mar 28 12:08:57 2015

Display More

My config mg_cfg:

Code

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 02 }




# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }




# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 01 }




# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 02 }




# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }




# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32    cccamd netclient, card list saved as /tmp/cccamd.info
#        (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }




# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 }




# network ecm timeout in seconds
K: { 07 }




# newcamd dead routes connect retry, sec
Q: { 10 }




# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }




# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password




# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 11 } 88




# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 04 } 127.0.0.1 28007 /tmp/mgcamd.log
#L: { 00 }




# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }




# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 04 }




# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }




# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }




# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 10 stapi/openbox
# 11 enigma/ipbox
# 12 octagon
B: { 11 }




# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

Display More

Does anyone have an idea what is wrong?

Thanks a lot!

**master G** · Mar 28th 2015

Either there is interference on your network from a wireless network, another device using the bandwidth or the server has a problem. The ecm times are more than x5 times higher than they should be.

Code

[mg0] cccamd route SERVER:19702 cant decode ([COLOR='#FF0000']2852ms[/COLOR])

_dYna_ · Mar 31st 2015

Hi there,

after some help in another forum "i" figured it out.
It had nothing to do with the server, but with my config.
There where a lot ECM requests which could not be solved; can be seen in the logs.
So i added this to the ignore.list:

Code

X: { 18 43 }
X: { 18 60 }
X: { 18 6A }
X: { 09 C4 }
X: { 09 8C }
X: { 09 AF }
X: { 0D 95 }
X: { 06 48 }
X: { 17 02 }
X: { 0D 98 }
X: { 06 50 }

Display More

Also i tweaked mg_cfg a bit:

Code

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }




# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }




# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 00 }




# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 02 }




# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }




# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32	cccamd netclient, card list saved as /tmp/cccamd.info 
#    	(ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }




# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 3 10




# network ecm timeout in seconds
K: { 03 }




# newcamd dead routes connect retry, sec
Q: { 10 }




# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }




# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password




# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 11 } 8080




# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 04 } 127.0.0.1 28007 /tmp/mgcamd.log
#L: { 00 }




# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 } 




# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 04 }




# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 01 }




# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }




# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 10 stapi/openbox
# 11 enigma/ipbox
# 12 octagon
B: { 11 }




# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

Display More

No it works...
Maybe this can help someone else in the future. *who knows*

**bundersuk** · Apr 20th 2015

Thanks Dyna, adding the text to the ignore.list file has made my solo2 more stable, though i have no idea what it is doing. Can u please explain what it is doing or point me in the right direction, tried to search for info on ignore.list and priority.list but info pretty vague.

Thanks Again

bundersuk

mgcamd -> cccam Server: problems with HD+

MGCamd Support Forum

Participate now!

Share

Tags