EMP DiSEqC Profiline Relais 9/1 P.168-W V2
Table 1: P.168 V1 / P.168-W V1 <--- this you need if you have a version 1
Sat System A: committed AA uncommitted 0
Sat System B: committed AB uncommitted 0
Sat System C: committed BA uncommitted 0
Sat System D: committed BB uncommitted 0
Sat System E: committed AA uncommitted 1
Sat System F: committed AB uncommitted 1
Sat System G: committed BA uncommitted 1
Sat System H: committed BB uncommitted 1
Table 2: P.168 V2 / P.168-W V2 <---- this is the table we need
Sat System A: committed none uncommitted 0
Sat System B: committed none uncommitted 1
Sat System C: committed none uncommitted 2
Sat System D: committed none uncommitted 3
Sat System E: committed none uncommitted 4
Sat System F: committed none uncommitted 5
Sat System G: committed none uncommitted 6
Sat System H: committed none uncommitted 7
[Step 01]
QuoteInstall tvheadend
if you have do this all ready skip this step
[step 02]
Quotewe need to know the ip number from openelec
if you know your ip number you can skip this step
[step 03]
Quote
Quotereplace the ipnumber with your own
[step 04]
QuoteClick on "Configuration" then click on "DVB input"
Quoteclick on "Availink AVL6211+AV2011 DVB-S/S2 : DVB-S #0"
Quoteby SatConfig: clink on the pull down menu and choose "Advanced (Non-Universal LNBs, Rotors, etc.)"
Quotecheck the box by "Enable" then click on [Save]
[step 05]
QuoteAdvanced (Non-Universal LNBs, Rotors, etc.)
QuoteBy Orbital Positions: replace the 0 into 8 then click on [Save]
[step 06]
LNB 1 = 28.2E
LNB 2 = 23.5E
LNB 3 = 19.2E
LNB 4 = 16.0E
LNB 5 = 13.0E
LNB 6 = 7.0E
LNB 7 = 4.8E
LNB 8 = 0.8 W
QuoteClick on Networks
QuoteClick on "Add"
Quotei have have a wetek with 2 satellite tuners so i need to click on "dvb-s Network"
QuoteClick on "Create"
Quoteafter we do this by all 8 sat we get this to see
Quotethe sats on the blue lines, tvheadend have not there "Pre-defined Muxes:" for
you must add your self
[step 07]
QuoteThis are the setings for this lnb
click then on [Save]
QuoteUncommitted:0 is lnb1. Uncommitted:7 is lnb8
Quoterepeate this by every lnb
Quotethis you get if you have do all lnb
if you have Enable all lnb it wil take a very long time by scan the sats
the zip file is my back with this settings and tvheadend and oscam is so you dont need do this all :)
first unzip the file then do copy to /storage/backup see tutorial