U brick Wetek play

There are 9 replies in this Thread which was already clicked 2,735 times. The last Post () by busman.

    About to give up on this, I have downloaded USB Image Tool exe and
    WeTeK Play rescue but can't get the rescue file onto a SD card,any
    pointers as to what I'm doing wrong. I have been following the link
    by snifferdsx (howto-u brick-Wetek-play).

    the program above as admin ;)

    PM for support 0nly with a Link to Y0ur
    P05t w1Th Wat5 up 0r 155u3 thaT5
    B33N ....... P05T3D


    0D3R PATCH3D 3H ;)
    much <3 th0ugh in d0 a5 Ab0v3
    1n Wh3n 533N r3plY n PM n 58PP0rt G1v3n ;)



    "I'm against Piracey so please DONT ATTACK SHIPS"
    :p

    toothfairy


    also make sure you format the card to fat32.


    i found the format tool and my lappie card reader didn't like each other, so i went and got a usb card reader.


    I used that and the windoze format tool, and the win32disc manager now everything formats and installs perfectly.


    Not saying go and buy a usb device, but sometimes the avaliable devices/progs are not up to the job.


    best regards and good luck: canthackit

    Thanks canthackit I have the card formatted to Fat32 for sure but what I would really need is a step by step guide leaving nothing out because I'm doing something wrong along the way.I have got to the point where
    I'm ready to put it away. I might see if I can get someone to do it for me.


    Cheers.

    right click on Win32DiskImager run as administrator select device on right hand side for the sd card,to left of side of the device is little blue folder thats what you need to import rescue file, click on write that's it Win32DiskImager will do the rest, if you need teamviewer we ll do it tomorrow evening

    Thanks busman for your reply,I followed your instructions as far as clicking on the blue folder
    which brings up a window entitled downloads and I have to click on a window called file name
    which has a drop down menu with a file named c:\f2\documents\wetek-OpenElec.img which
    I open and click write which it does successfully but does nothing when I put the card in the Wetek.
    Where am I going wrong,this is the most successful I've been.


    - - - Updated - - -


    Quote from toothfairy

    Thanks busman for your reply,I followed your instructions as far as clicking on the blue folder
    which brings up a window entitled downloads and I have to click on a window called file name
    which has a drop down menu with a file named c:\f2\documents\wetek-OpenElec.img which
    I open and click write which it does successfully but does nothing when I put the card in the Wetek.
    Where am I going wrong,this is the most successful I've been.




    Disregard the above post


    - - - Updated - - -


    Hi busman,do I put the 3 files from inside the recovery folder on the SD card?

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login