hi,
i have a problem with a tnt sat card. i can't read with the openbox, so i decide to use oscam with dream 500. but i don't work. please
rootdream
TNT Help
-
- Viaccess Cards OSCam
- ROOTDREAM
- Thread is marked as Resolved.
-
-
Well nobody here are mind readers as far as i know, so if you want help you need to give alot more info about your setup & what you have tried.
-
Hello
i hav dm7000using gemini 4.70 oscam and cccam2.21 with original card tnt not working since 3month te carde exp dec 2013 any help guys i tried everythink
thks -
Show us the oscam configs you were using and tell of any errors in webinfo.
-
hej how can i show you oscam.conf and oscam web erreur
thks -
Copy and paste the config or attach them to this thread, open oscam webinfo and copy, paste any errors you see.
-
hej her the information you need thks for help
-
You need to post oscam.server and oscam.user files also.
-
thks for reply her oscam user and oscam server i hope it will work
Code
Display More# # reader configuration # # serial reader #[reader] #label = reader1 #protocol = mouse #detect = CD #device = /dev/ttyS0 #group = 1 #emmcache = 1,3,2 #services = services1 #caid = 0100 # USB serial reader #[reader] #label = reader2 #protocol = mouse #detect = CD #device = /dev/ttyUSB0 #aeskey = 000102030405060708090A0B0C0D0E0F #group = 2 #emmcache = 1,3,2 #services = services2 #caid = 0200 # remote newcamd reader with fallback for group 1 #[reader] #label = remote1 #protocol = newcamd #key = 0102030405060708091011121314 #device = 192.168.0.2,66666 #account = login1,password1 #group = 1 #fallback = 1 # remote camd 3.78x reader with fallback for group 2 #[reader] # # user configuration # # user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled #[account] #user = user1 #pwd = password1 #monlevel = 0 #uniq = 1 #group = 1 #au = reader1 #services = services1 #betatunnel = 0300.FFFF:0100,0400.FFFF:0100 #ident = 0100:000000 #caid = 0100 # user for group 2 with monitor access, AU enabled #[account] #user = user2 #pwd = password2 #monlevel = 1 #uniq = 0 #group = 2 #au = reader2 #services = services2 #ident = 0200:000000 #caid = 0200 # user for group 2 without monitor access, AU disabled, account disabled #[account] #user = user3 #pwd = password3 #disabled = 1 #group = 2 #services = services2 #ident = 0200:000000 #caid = 0200 # user for group 3 without monitor access, only one connection possible, AU disabled, multiple idents #[account] #user = user4 #pwd = password4 #monlevel = 0 #uniq = 1 #group = 3 #ident = 0300:000000,FFFFFF;0400:FFFFFF #caid = 0300 #device = 192.168.0.6,56789 #group = 5 #caid = 0500 # PCSC reader #[reader] #label = mypcscreader #protocol = pcsc #device = 0 #aeskey = 0102030405060708090a0b0c0d0e0f10 #group = 6 #caid = 0600 # Smargo Smartreader+ #[reader] #label = mysmartreader #protocol = smartreader #device = 001:002 #aeskey = 0102030405060708090a0b0c0d0e0f10 #group = 7 #caid = 0700 # internal reader #[reader] #label = myinternalreader #protocol = internal #device = /dev/sci0 #group = 8 #caid = 0800
-
Buddy there is nothing active in your configs related to TNT card, everything has # infront.
Let me look for the configs for you buddy.
-
Oscam + CCcam 2.1.3 config
Code
Display More####oscam.conf#### [global] nice = -1 logfile = /dev/null clienttimeout = 5000 fallbacktimeout = 2500 clientmaxidle = 120 cachedelay = 120 bindwait = 120 resolvedelay = 30 serialreadertimeout = 1500 maxlogsize = 10 waitforcards = 1 preferlocalcards = 1 saveinithistory = 1 keepalive = 1 [webif] httpport = 8888 httpuser = httppwd = httprefresh = 5 httphideidleclients = 0 httpallowed = 192.168.0.0 - 255.255.255.255 debug = 255 [newcamd] key = 0102030405060708091011121314 port = 34001@0500:030B00 ####oscam.server#### [reader] label = TNTSAT protocol = internal device = /dev/sci0 emmcache = 1,3,2 group = 1 caid = 0500 ident = 0500:030B00 aeskey = A79AC0DBEC9C9251D1915F058862AF26 #SD aeskey = 439726EBB6A939A456C05FF6AA606C43 #HD ####oscam.user#### [account] user = linuxsat pwd = support monlevel = 0 uniq = 0 group = 1 au = TNTSAT caid = 0500 ident = 0500:030B00
Put this N line in your CCcam.cfg
-
hej stil not working i did exactly to same with oscam server , user ,conf plus i put N LINE CCCam cfg
what can i do
best regard -
You are using cccam2.21, you need to be using version 2.1.3 or below for your card to show HOP0 local.
I cant help any further until you show us errors from oscam webinfo, then we can find what your problems are.
-
oscam web info how can i do it? and i will download oscam2.13
my best regard -
-
her my card information
Welcome to CCcam 2.2.1 servercard reader /dev/sci0
no or unknown card insertedcard reader /dev/sci1
handled 0(0) ecms and 0(0) emms
Viaccess card
Caid 500
Cardserial 11e4c2
ident fff400 - 11e4c2
ident 30b00 - 11e4c2
valid from 29-10-2009 untill 1-12-2012card reader /dev/usb/tts/0
no or unknown card inserted -
Hej:
access forbiden in my webinf using oscam1.00 -
Hej:
access forbiden in my webinf using oscam1.00You get this message when the httpallowed = in oscam.conf isnt configured to your network.
Make it like below and it will connect.
Attached is oscam+CCcam2.1.3 ipk for gemini image, install this and add the oscam configs i gave you.
-
Hej this file is for E2 and Iam using E1 gemini for dm7000s thanks budy
-
The main problem you are going to have is oscam + CCcam2.1.3 starting together, because they are separate emulators there is no script to connect both when you start in softcam manager.
If you are finding it difficult to add oscam configs then editting scripts will be a real headache for you.
I suggest you look for an image that allows you to install oscam+CCcam2.1.3 as a combo, with scripts already editted.
Or just use oscam as server with dvapi enabled, without separate CCcam.
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!