- hotfix freeze after some channel changes
- throttled mpeg decoder debug output a bit
- fixed bcm4506 tuner crash (no hab ack messages in kernel debug)
- fixed bcm4506 manual LDPC FEC modes
- fixed readback of current pilot state for dvb-s2 frontends (needs a linuxtv api fix)
- readback corrected symbolrate and frequency for bcm4501 and bcm4506
- cxd1981 DVB-C optimizations
Latest drivers for DM 800HD..
- master G
- Thread is marked as Resolved.
-
-
21-08-2011dreambox-dvb-modules: update dm800 hardware drivers
- added 3D framebuffer support (for side by side and top and bottom 3D services)
(no auto detection yet)- fixed audio sync problems on playback to live transition
- bcm4505/06
- experimentally added blindscan support (needs e2 changes)
- experimentally added "Turbo FEC" support (needs e2 changes)
- added constellation buffer read support
- fixed problems when more than one 4505/4506 tuner is used in the same box
- fixed standby problems
- added possibility to use SCPC optimized search ranges
- alps-bsbe1-c01a
- experimentally added blindscan support (needs e2 changes)
- added constellation buffer read support
- fixed locking problems (better performance)
- bcm4501:
- added possibility to use SCPC optimized search ranges
- cxd1981: fixed tuner problems after bootup from deepstandby in DVB-C mode
- added Nagra rev. 1.1 CI support to dm8000
- small alsa signed / unsigned fix
-
hello
thanks how do i install these drivers
thanks again -
dm800hd
update dreambox hardware drivers
- fixed possible locking problems (deadlock)
- fixed hybrid tuner (cxd1981) init problem,
add possibilty for faster mode change via
FE_SET_PROPERTY DTV_DELIVERY_SYSTEM ioctl
- bcm4505 small typo fixed
- better /proc/stb(vmpeg/X/dst_* handling via dst_applyCodehttp://sources.dreamboxupdate.com/opendreambox/1.6/dm800/experimental/dm800/dreambox-dvb-modules_2.6.18-7.4-dm800-20110902-r0_dm800.ipk
THESE DRIVERS ARE FOR GENUINE DREAMBOX RECEIVERS ONLY DO NOT USE ON CLONES -
dm800hd
dreambox-secondstage: update dm800, dm800se, dm500hd, dm8000 2nd stage loaders
dm8000: compatibility for other 256MB flash chips (EOL of old type)
dm800, dm800se, dm500hd: added enhanced flash error correction (only used with new firmware images)
Codehttp://sources.dreamboxupdate.com/opendreambox/1.6/dm800/experimental/dm800/dreambox-secondstage_84-r0_dm800.ipk
THIS SSBL IS FOR GENUINE DREAMBOX RECEIVERS ONLY DO NOT USE ON CLONE MACHINES. -
10-11-2011
dreambox-dvb-modules.bb: update dreambox hardware drivers
dm800/dm8000:
- fixed sometimes inoperable hdmi audio after code change to AAC/MP3
dm7020hd:
- fixed bcm4505 tuner detection problems on boot from deep standby
- fixed support for high bitrate transponders (no CI support yet)
all:
- dont allow to allocate a demux pid filter for fake pid 0x2000
- fixed inoperable AUDIO button on DM7020HD remote control (dip switch depending)
- optimized blindscan (ignore duplicate found TPs, low SR crash)
dreambox-dvb-modules_2.6.18-7.4-dm800-20111109-r0_dm800.rar (2.11 MB)
dreambox-dvb-modules-dbg_2.6.18-7.4-dm800-20111109-r0_dm800.rar (856 Bytes)
dreambox-dvb-modules-dev_2.6.18-7.4-dm800-20111109-r0_dm800.rar (830 Bytes) -
10-11-2011
dreambox-dvb-modules.bb: update dreambox hardware drivers
dm800/dm8000:
- fixed sometimes inoperable hdmi audio after code change to AAC/MP3
dm7020hd:
- fixed bcm4505 tuner detection problems on boot from deep standby
- fixed support for high bitrate transponders (no CI support yet)
all:
- dont allow to allocate a demux pid filter for fake pid 0x2000
- fixed inoperable AUDIO button on DM7020HD remote control (dip switch depending)
- optimized blindscan (ignore duplicate found TPs, low SR crash)
dreambox-dvb-modules_2.6.18-7.4-dm8000-20111109-r0_dm8000.rar (2.44 MB)
dreambox-dvb-modules-dbg_2.6.18-7.4-dm8000-20111109-r0_dm8000.rar (907 Bytes)
dreambox-dvb-modules-dev_2.6.18-7.4-dm8000-20111109-r0_dm8000.rar (871 Bytes) -
Latest updated DMM hardware drivers 16.02.2012
update dm500hd, dm800se, dm8000, dm7020hd and dm800 hardware drivers
- fixed overflow on aspect ratio calculation
this fixes possible wrong scaled content- fixed scale factor calculation for dm800
i.e. fixes wrong scaled IPTV services- fixed non transparent framebuffer after bootup
this fixes not visible bootlogo before e2 starts on dm800 -
master G
Moved the thread from forum Dreambox Drivers to forum DM800 HD.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!