Latest drivers for DM 800HD..

21-08-2011

dreambox-dvb-modules: update dm800 hardware drivers

- added 3D framebuffer support (for side by side and top and bottom 3D services)
(no auto detection yet)

- fixed audio sync problems on playback to live transition

- bcm4505/06

• experimentally added blindscan support (needs e2 changes)
• experimentally added "Turbo FEC" support (needs e2 changes)
• added constellation buffer read support
• fixed problems when more than one 4505/4506 tuner is used in the same box
• fixed standby problems
• added possibility to use SCPC optimized search ranges

- alps-bsbe1-c01a

• experimentally added blindscan support (needs e2 changes)
• added constellation buffer read support
• fixed locking problems (better performance)

- bcm4501:

• added possibility to use SCPC optimized search ranges

- cxd1981: fixed tuner problems after bootup from deepstandby in DVB-C mode

- added Nagra rev. 1.1 CI support to dm8000

- small alsa signed / unsigned fix

hello
thanks how do i install these drivers
thanks again

dm800hd

update dreambox hardware drivers
- fixed possible locking problems (deadlock)
- fixed hybrid tuner (cxd1981) init problem,
add possibilty for faster mode change via
FE_SET_PROPERTY DTV_DELIVERY_SYSTEM ioctl
- bcm4505 small typo fixed
- better /proc/stb(vmpeg/X/dst_* handling via dst_apply

http://sources.dreamboxupdate.com/opendreambox/1.6/dm800/experimental/dm800/dreambox-dvb-modules_2.6.18-7.4-dm800-20110902-r0_dm800.ipk

THESE DRIVERS ARE FOR GENUINE DREAMBOX RECEIVERS ONLY DO NOT USE ON CLONES

dm800hd

dreambox-secondstage: update dm800, dm800se, dm500hd, dm8000 2nd stage loaders
dm8000: compatibility for other 256MB flash chips (EOL of old type)
dm800, dm800se, dm500hd: added enhanced flash error correction (only used with new firmware images)

http://sources.dreamboxupdate.com/opendreambox/1.6/dm800/experimental/dm800/dreambox-secondstage_84-r0_dm800.ipk

THIS SSBL IS FOR GENUINE DREAMBOX RECEIVERS ONLY DO NOT USE ON CLONE MACHINES.

10-11-2011

dreambox-dvb-modules.bb: update dreambox hardware drivers

dm800/dm8000:

- fixed sometimes inoperable hdmi audio after code change to AAC/MP3

dm7020hd:

- fixed bcm4505 tuner detection problems on boot from deep standby

- fixed support for high bitrate transponders (no CI support yet)

all:

- dont allow to allocate a demux pid filter for fake pid 0x2000

- fixed inoperable AUDIO button on DM7020HD remote control (dip switch depending)

- optimized blindscan (ignore duplicate found TPs, low SR crash)

dreambox-dvb-modules_2.6.18-7.4-dm800-20111109-r0_dm800.rar (2.11 MB)
dreambox-dvb-modules-dbg_2.6.18-7.4-dm800-20111109-r0_dm800.rar (856 Bytes)
dreambox-dvb-modules-dev_2.6.18-7.4-dm800-20111109-r0_dm800.rar (830 Bytes)

10-11-2011

dreambox-dvb-modules.bb: update dreambox hardware drivers

dm800/dm8000:

- fixed sometimes inoperable hdmi audio after code change to AAC/MP3

dm7020hd:

- fixed bcm4505 tuner detection problems on boot from deep standby

- fixed support for high bitrate transponders (no CI support yet)

all:

- dont allow to allocate a demux pid filter for fake pid 0x2000

- fixed inoperable AUDIO button on DM7020HD remote control (dip switch depending)

- optimized blindscan (ignore duplicate found TPs, low SR crash)

dreambox-dvb-modules_2.6.18-7.4-dm8000-20111109-r0_dm8000.rar (2.44 MB)
dreambox-dvb-modules-dbg_2.6.18-7.4-dm8000-20111109-r0_dm8000.rar (907 Bytes)
dreambox-dvb-modules-dev_2.6.18-7.4-dm8000-20111109-r0_dm8000.rar (871 Bytes)

update dm500hd, dm800se, dm8000, dm7020hd and dm800 hardware drivers

- fixed overflow on aspect ratio calculation
this fixes possible wrong scaled content

- fixed scale factor calculation for dm800
i.e. fixes wrong scaled IPTV services

- fixed non transparent framebuffer after bootup
this fixes not visible bootlogo before e2 starts on dm800