i have installed image open atv 5.1 image plz guide me i use cccam 2.3.0 my line c line tell me i can use this c line in oscam tell me which version installed oscam and how to put line which folder
Sent from my GT-I9300I using Tapatalk
There are 10 replies in this Thread which was already clicked 1,899 times. The last Post () by wasimafzal786.
i have installed image open atv 5.1 image plz guide me i use cccam 2.3.0 my line c line tell me i can use this c line in oscam tell me which version installed oscam and how to put line which folder
Sent from my GT-I9300I using Tapatalk
Which receiver do you have ?
my receiver dm800hd se sim 2.10
Sent from my GT-I9300I using Tapatalk
you can install any version to oscam in your dreambox image menu
here is the config how to enter the cline in oscam
first open oscam via web or dcc if you opening via dcc then go to ftp/usr/keys/oscam/oscam.servers
[reader]
label = peer
protocol = cccam
device = sharer.dyndns.com,12000
user = user
password = pass
group = 1
i have installed oscam_ymod 18.64 in open atv feeds and put line oscam servers but no ok
[reader]
label = peer
enable = 0
protocol = cccam
device = cccam servers.no-ip.org,12000
user = admin
password = admin
fallback = 1
group = 1
lb_weight = 100
cccversion = 2.3.0
cccmaxhops = 10
cccmindown = 0
ccckeepalive
change
enable = 0
to
enable = 1
Try this
[reader]
label = nameofprovider
enable = 1
protocol = cccam
device = cccam servers.no-ip.org,12000
user = admin
password = admin
fallback = 1
group = 1
cccversion = 2.3.0
cccmaxhops = 3
ccckeepalive = 1
P.S. and must have minimum 2 files, oscam.user and oscam.conf.
Tomorrow you can send me personal message on this forum to help you with detail.
Послато са Lenovo a536 користећи Тапаток 2
The attached oscam-emu has dvbapi configured in oscam.conf & .user. Convert your C line with CCcam2Oscam, then add to oscam.server..
Display Moreyou can install any version to oscam in your dreambox image menu
here is the config how to enter the cline in oscam
first open oscam via web or dcc if you opening via dcc then go to ftp/usr/keys/oscam/oscam.servers
[reader]
label = peer
protocol = cccam
device = sharer.dyndns.com,12000
user = user
password = pass
group = 1
What is the method to open oscam via web
It is go to web browser like Chrome or Firefox, then in address bar type IP adress of your receiver and port, example 192.168.1.102:12000 where is 192.168.1.102 is IP adress and 12000 is a port.
Which is IP adress you can see in Menu, Settings, Network, Adapter settings of receiver.
But Port number you have to read from file oscam.conf into section [webinfo].
Sent from my A536 using Tapatalk 2
thanks my friend radja
are u using wicard radja
Sent from my GT-I9300I using Tapatalk
Don’t have an account yet? Register yourself now and be a part of our community!