Good evening
Looking for some help with a box i just bought xtrend 9500 open vix latest
after using a ferguson ariva with no freezing i am wondering what im doing wrong
using cccam 2.3.0 downloaded from plugin downloader
put my line in etc folder works fine for about an hour but then starts freezing
do i need a config file?
which one is best
should i try oscam? again which is best
Thanks again
Cccam freezing
-
- Various Support
- fionncorp
- Thread is marked as Resolved.
-
-
CCcam doesn`t require any configuring when you are just a peer. Copy/paste/save the C line in CCcam.cfg and that`s it..
Oscam is worth a try. Use the attached configs that have dvbapi enabled and an [account] setup for it. Use CCcam2oscam to convert the c line to a [reader] > Copy/paste/save the [reader] into oscam.server file > FTP oscam configs to /etc/tuxbox/config folder..
-
Just peer yes
So all I have in my cccam config file is like bellow
N: example.com 18888 username45 password 01 02 03 04 05 06 07 08 09 10 11 12 13 14And this should work cccam 2.3.0 but when I record one channel and watch another I get freezing
Will try oscam in a while
-
Does this N line have reshare ? If it doesn`t, when you try to record CCcam will use a different N or C line / share. If you don`t have another suitable share it will freeze because it`s using a poor server.. Which hop is being used and what is the ecm time when you record (look at the infobar for these details) ?
-
hop 1 ecm around 250
- - - Updated - - -
SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /var/log/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000N: server.com 18888 username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
(256 i left out)this is exactly the cfg file i have put into var etc and changed to 755 (is this correct? if so and does not work ill try oscam)
cheers- - - Updated - - -
the above configuration seems to be working for me,fingers crossed little or no freezing:09:
next step oscam
CCcam Support Forum
Configs, discussion, downloads and guides for CCcam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!