please help me i want to flash hdmu image in my et8000 box i flash hdmu image but in my box show booting ...not booting up my box so how can i flash please help me
et8000
- asif111
- Thread is marked as Resolved.
There are 6 replies in this Thread which was already clicked 1,191 times. The last Post () by THE FUGITIVE.
-
-
Booting to a new image can take several minutes are you sure you are waiting long enough
CHOOSE a image of your choice for ET8000
have a USB pen drive preferably kingston lower than 8gb ready
Format the pen drive to FAT32 on your computer
Download your chosen image and unpack /unrar/unzip and send the unpacked file to your FORMATTED usb stick
TURN OFF your reciever using rocker switch at back
PUT YOUR usb in front or rear usb port and switch on machine
WHEN you are prompted press OK on front of box not remote
the box should go through the process of loading image DO NOT DISTURB AT THIS POINT it will take several minutes and will boot to new image ONLY WHEN it starts booting take out usb pen drive and not beforeIf you have flashed wrongly or it is failing to boot try again using a formatted pen drive
-
thanks mate
As per the forum rules bud please do not post "Thank-you" posts, they will be deleted........ they use up valuable server space. Use the thanks & like tabs (coloured green) at the bottom of the box in which a post has been made.
-
i try half hours but steel on booting mate i ask hdmu side too he say you need to created bootlog with 232 something so i dont know how to make if you know then tell me please .....i try all urs image working fine but only hdmu image was not booting up i dont know why please help mate thanks
-
If other images are working vfine when you have flashed them then i dont understand why you cannot flash THE HDMU image are you sure you are flashing the latest for the ET8000 and do you really want HDMU i know images are a personel preference but if aqn image gave me issues i would use another --VIX is a very good image to try i use it myself on the ET8000
-
i try all hdmu image but all stuck on boooting yes i want that image if you have it please and yes vix image was best i have that too i backup
-
-
master G
Moved the thread from forum Clarke-Tech | Xtrend Support to forum Xtrend - All Models. -
master G
Moved the thread from forum Xtrend - All Models to forum Xtrend ET-8000. -
master G
Moved the thread from forum Xtrend ET-8000 to forum Xtrend - All Models.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!