Hi, It might be a dumb question but is it possible to run mgcamd server on normal computers (Linux, windows, Raspberry Pi) with card readers attached? I am able to run Oscam on Linux with many (100+) but someone recommend me to use mgcamd.
Thank you for your time,
Hi, It might be a dumb question but is it possible to run mgcamd server on normal computers (Linux, windows, Raspberry Pi) with card readers attached? I am able to run Oscam on Linux with many (100+) but someone recommend me to use mgcamd.
Thank you for your time,
Just to confirm you are currently running with 100+ clients with no problems ?
Hi, It might be a dumb question but is it possible to run mgcamd server on normal computers (Linux, windows, Raspberry Pi) with card readers attached? I am able to run Oscam on Linux with many (100+) but someone recommend me to use mgcamd.
Thank you for your time,
Yes you can use a normal computer linux or windows and get much better ecm time with the correct card reader like omnikey,
Just to be sure i ask what CARD is your LOCAL :welcome:?
I am running OSCAM with 3 SlyUK with OmniKeys, sometimes ecm goes as high as 1000-1200ms when too many requests comes together.
Here is my dumb question? where to download mgcamd server for windows/linux?
There is a limited number of ecm`s a card can handle before it starts to overload, this is why the ecm time is so high.. 3 cards should handle 100 clients easily, how many exactly do you have on there ? Do you have load balancing or any cache setup ?
Prophet: Yes, 100+ with no problem (almost)
I am using 3 x Sly UK with 3 x OmniKey
ecm some times goes as high as 1000-1200
any recommendation?
Use some of the proceeds from your pay server to buy more cards and readers.
61e98f512eb7f.gif..........
Its my oscam.conf, any suggestion please?
[global]
logfile = /var/log/oscam/oscam.log
nice = -1
maxlogsize = 10000
waitforcards = 0
preferlocalcards = 1
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
emmlogdir = /var/log/oscam/
lb_mode = 1
lb_save = 100
lb_savepath = /var/log/oscam/lbstats
resolvegethostbyname = 1
[anticasc]
enabled = 1
numusers = 1
samples = 5
penalty = 3
aclogfile = /var/log/oscam/aclog.log
denysamples = 4
[cache]
delay = 0
max_time = 30
max_hit_time = 30
wait_time = 350,0960:260
cacheexenablestats = 1
cwcycle_check_enable = 1
cwcycle_check_caid = 0963
cwcycle_maxlist = 4000
cwcycle_keeptime = 20
cwcycle_sensitive = 0and oscam.server
[reader]
label = U0
protocol = pcsc
device = 0
caid = 0960
detect = cd
group = 1
emmcache = 1,3,2,0
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
[reader]
label = U1
protocol = pcsc
device = 1
caid = 0960
detect = cd
group = 1
emmcache = 1,3,2,0
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
[reader]
label = U2
protocol = pcsc
device = 2
caid = 0960
detect = cd
group = 1
emmcache = 1,3,2,0
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1Can I improve this?
Are you running a payserver???
Not yet, but thinking.
Oops, Thread closed..
Think about reading the rules while your on holiday:
http://linuxsat-support.com/misc.php?do=vsarules
Bye for now.../..ever.
Don’t have an account yet? Register yourself now and be a part of our community!
