Hi all. Just to confirm alt image is definitely the best. ABM, XMLTV Rytec, OSCAM, Record, Play, Record subscription channel and watch another subscription channel all works great. This is the best image for this box by far. Running from sd card and also have logitech harmony remote working with it so no need for loads of remotes. The image I used is 3/1/2016.
PBNIGMA VX 6.1 WeTekPlay
-
- WeTek Enigma2
- birali
- Thread is marked as Resolved.
-
-
-
Bleeding edge:
WeTekPlay PBNIGMA VX 5.1. SDcard 27.01.2016
http://pb-download.com/images/…X-5.1-20160127_sdcard.zipEDIT 26.1.2016
- updated feeds
- major E2 changes
- new kernel
- new drivers
- different libs
- REFLASH needed- built in AutoBouqetsMaker seems to work fine
- multi channel passthrough (for now) must be enabled thru WeTek Extra menu (PCM->RAW) soon to bee changed
- fixed Radio mode
- improved AV sync
-
Hello,
beautiful image except on the kodi lack the flash disk (HDD).
Thank you. -
EDIT 26.1.2016
- fix for vmodes and policies - on line update
- - - Updated - - -
Bleeding edge:
WeTekPlay PBNIGMA VX 5.1. SDcard 28.01.2016
http://pb-download.com/images/…X-5.1-20160128_sdcard.zipEDIT 28.1.2016
- fix recording drama
- - - Updated - - -
Bleeding edge:
WeTekPlay PBNIGMA VX 5.1. SDcard 29.01.2016
http://pb-download.com/images/…X-5.1-20160129_sdcard.zipEDIT 29.1.2016
- correct server build, caused faulty images
- new dvb drivers
- new e2 low level drivers
- E2 misc changes for wetek
-
guys need help.. I have flashed this image but cant seem to set it up properly as the remote will not work. The colored buttons on my remote do not work with this image or openatv for that matter.
Is there a way around this?
-
What remote do u have? If it's the wee egg shaped remote with the wetek play then u press the back key. It's an arrow pointing left on ur remote. This turns buttons 1-4 into red green yellow and blue in that order.
If u have the bigger wetek remote then u need to press menu, settings, system and scroll down to keymap, choose openelec hwtest
Think u also have to set the rc to openelec. Both options are a few menu choices apart and all can be done with the basic remote setup as u only need menu, up, down and ok. (Also usually green)
If ur stuck, open a web browser on ur phone or laptop and stick in the IP address of the box. U should be able to click remote and control it that way on screen
-
WeTekPlay PBNIGMA VX 5.1. SDcard 31.01.2016
http://pb-download.com/images/…X-5.1-20160131_sdcard.zipEDIT 31.1.2016
- minor E2 fixes
-
WeTekPlay PBNIGMA VX 5.1. SDcard 09.02.2016
http://pb-download.com/images/…X-5.1-20160209_sdcard.zipEDIT 9.2.2016
- minor E2 fixes- analog video modes should work
- some iptv improvements
- misc kernel fixes (30W tested ok)
- driver fixes
- feeds renewed
-
WeTekPlay PBNIGMA VX 5.1. SDcard 11.02.2016
http://pb-download.com/images/…X-5.1-20160211_sdcard.zip11.2.2016
- feeds
- yet another AV sync fix -
Hi can somebody help me with getting oscam to work on this build? Thanks
-
WeTekPlay PBNIGMA VX 5.1. SDcard 17.02.2016
http://pb-download.com/images/…X-5.1-20160217_sdcard.zip17.2.2016
- misc E2 changes
- OpenElec keympap ELEChwtest updated
- feeds updated
-
Hi
I have installed the image from above link and it seems to be working well. I am trying to log into the box via ftp and it keeps saying user/password wrong. I have tried user = root and password = wetek are these correct? thanks for your help.
lolo1
-
Hi
I have installed the image from above link and it seems to be working well. I am trying to log into the box via ftp and it keeps saying user/password wrong. I have tried user = root and password = wetek are these correct? thanks for your help.
lolo1
password = powerboard
-
WeTekPlay PBNIGMA VX 5.1. SDcard 29.02.2016
http://pb-download.com/images/…X-5.1-20160229_sdcard.zip29.2.2016
- feeds updated- E2 misc updates
-
Quote
Kernel is changed, therefore re flash needed.06 March 2016 Bleeding edge edition
http://anonym.to/?http://pb-do…X-5.1-20160306_sdcard.zip
I have tested ABM, it works fine
Cross EPG downloader also works. However be sure to use the same location in EPG settings as well as in Cross EPG downloader. -
WeTekPlay PBNIGMA VX 5.1. SDcard 09.03.2016
http://pb-download.com/images/…X-5.1-20160308_sdcard.zip8.3.2016
- feeds updated
- E2 major update, dozens of files to make it PB mainline compatible
- misc, INFO-epg switched to graphic mode- on-line update safe
- added support for new RCs from wetekwala: GI LX3, SkyBox, Technomate Nano
9.3.2016
- On line E2 update-fix for possible EPG problems
-
cross EPG does not for me with new update....
-
WeTekPlay PBNIGMA VX 5.1. SDcard 12.03.2016
http://pb-download.com/images/…X-5.1-20160312_sdcard.zip12.3.2016
- E2 update
- misc update from the mainstream
- Wetek gst audio releated stuff
-
WeTekPlay PBNIGMA VX 5.1. SDcard 13.03.2016
http://pb-download.com/images/…X-5.1-20160313_sdcard.zip13.3.2016
- feeds fixed and updated
- the whole samba package installed again by default
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!