Posts by master G

Try using this

PHOENIX READER PATH : /dev/tts/0

Lately on the net there were a lot of rumours about a CCCam 2.011 based modified server that is capable to take control and modify the hop level of any local card from the connected peers to this server - his name is 2MyCAM R02 (second release) server".
Unfortunatly it's not a rumour - this exist and I have got the pricelist of this server - and if it's not spreaded it's for his quite high price.
To be clear - I'm not making publicity to this - this is a REAL threat to the cardsharing users... THIS is a WARNING for ALL cardsharing users...

Before I was thinking to realease this bad info I was wrote with one of the moderators named uttnls and he had agreed that this information can be realeased for the comunity - I hope the other moderators won't ban me for this thread and will speak first with him.

So here is the original pricelist and information about this

Quote

MyCam R02
This version of MyCam is working with Linux 32 and 64 bit Operating Systems. Recommended operating System is UBUNTU, CentOS or Fedora
MyCam R02 will be limited to 100 users. The requests are counted after payment confirmation. If more payments at same time, then the 100 limit will be increased with a few licences.
The MyCam R03 realease is scheduled to 2012.

Memberships Levels :

MyCam Reshare Feature Basic-> Membership Level (donation fee) (Title)
Reshare 1->100 euro (Basic I)
Reshare 2->150 euro (Basic II)
Reshare 3->200 euro (Basic III)
Reshare 4->210 euro (Basic IV)
Reshare 5->220 euro (Basic V)

MyCam Version Report-> Extra Membership Level (donation fee) (Title)
CCcam 2.0.11-> + 0 euro (Extra I)
CCcam 2.1.0-> + 20 euro (Extra II)
CCcam 2.1.1-> + 20 euro (Extra III)
CCcam 2.1.3-> + 30 euro (Extra IV)
CCcam 2.1.4-> + 20 euro (Extra V)
CCcam 2.2.0-> + 30 euro (Extra VI)
CCcam 2.2.1-> + 30 euro (Extra VII)

Special Features-> Super Membership Level (donation fee) (Title)
MyCam Freeze HOPs-> + 100 euro (Super I)
MyCam Bring all to HOP0-> + 100 euro (Super II)
MyCam Bring all to HOP1-> + 50 euro (Super III)
MyCam Bring all to HOP2-> + 25 euro (Super IV)

Support Subscription-> Dummy Membership Level (donation fee) (Title)
Installing Support-> + 150 euro (Dummy I)

1. MyCam Reshare Feature – means the level of reshare ( it will ignore your peer settings and you will get the specified reshare level , even he is not giving any reshare rights in F line)
Example : For Reshare 2 all your C lines cards can be reshared two more hops even you are not allowed to.
F: sample sample { 0:0:1 } will be equivalent to F: sample sample { 0:0:2 } (this is reshare2 case)
Obs.: On peer’s side the only method to detect MyCam is a huge ECM rate, if you have enough peers is impossible to detect

2. MyCam Version Report – Is the version that will be reported to your clients and also to your peers. Using this feature you can choose what version of MyCam will be displayed on clients and peers side.

Obs.: This feature is simply impossible to detect

3. Special Features :
- MyCam Freeze – Means that you won’t lose any additional hops on reshare, if you see for example 5 cards in hop 1 from your peers, you will reshare those cards as being in hop1 to your clients. Same thing will happen with cards from hop2, hop3 and so on (shortly hop freeze)
Example :
Your Server What YourClients See
Hop 1 = 5 => Hop1 = 5
Hop 2 = 40 => Hop2 = 40
Hop 3 = 100 => Hop3 = 100
- MyCam Bring all to HOP 0 – All the cards from your peers will be reported as being in HOP 0 to your clients

Example :
Your Server What Your Clients See
Hop 1 = 5 => Hop1 = 145
Hop 2 = 40 => Hop2 = 0
Hop 3 = 100 => Hop3 = 0
- MyCam Bring all to HOP 1 – All the cards from your peers will be reported as being in HOP 1 to your clients

Example :
Your Server What Your Clients See
Hop 1 = 5 => Hop1 = 0
Hop 2 = 40 => Hop2 = 145
Hop 3 = 100 => Hop3 = 0
- MyCam Bring all to HOP 2 – All the cards from your peers will be reported as being in HOP 2 to your clients

Example :
Your Server What Your Clients See
Hop 1 = 5 => Hop1 = 0
Hop 2 = 40 => Hop2 = 0
Hop 3 = 100 => Hop3 = 145

Obs.: This features can be detected only on client’s side, if they have a very good understanding of CCcam Servers and Protocols
Membership Examples and donation fee :
1. Basic II + Extra I = 150 euro
2. Basic II + Extra VII = 180 euro
3. Basic III + Extra VII = 230 euro
4. Basic II + Extra IV + Super I = 275 euro
5. Basic III + Extra I + Super II = 315 euro

Issuing method :
One MyCam Server on one Physical Host for one Membership Package

There are only two files MyCam binary and the licence. It has the exact options like a regular CCcam server, so it has no support because it will work by following any CCcam tutorial. That is why the price for Dummy is so expensive and in fact that is why the package is called dummy. And if there are real problems you will have free support, but not for stupid questions !

On each release we add new features, so you will have to pay for it, any patch on same release is free

There is no online demo !

The only reason for the high price is to protect the cardsharing community, and for this reason it will never be free.

Display More

Originall posted by kiss_ro

You have been warned, be very careful who you are sharing with.

Are you still getting errors in the log now you`ve changed the configs ?

You can also try using a differant version of oscam, if you need help with that let me know.

Have a look through this thread buddy, Tutorial: How to install Infinity USB programmer on a Debian with CCcam.

No solution yet as far as i am aware mate.

Quote from JediBUZ

With Glass System Utility UCM there seems to be no cccam.cfg. Whare can I tell cccam my boxkey?

Hi JediBUZ,
Firstly it is good manners to make an Introduction.
You have gave us no info about your setup at all so im guessing this is what you are looking for.

How To Use Your Sly UK Card In Your Dreambox

I see, Cannot open device: /dev/sci1, there is a problem with reading the card in the bottom slot of the Vu+.

Try changing the line Device in oscam.server to /dev/sci0 and put the card in the top slot, reboot the Vu+ and let us know if that helps.

Quote from roble

hi thanks

can same one help me i need to block all the adult channel in hotbird 13e and 28.2e
i need all the adult channel SID

F: user pass 2 0 0 { 0:0:2 } { 0963:000000:SID, 0963:000000:SID } and and and

thanks

Display More

It has already been explained how to do this in post 3, if you are having problems using sid assigner or creating boquets there are already guides on the forum.

If there is nothing written on the sim try using this to detect the version.

When it boots up you can see the bootloader version displayed on the led panel, also if sim 2.0.1 there should be a sticker on the underside of the box.

Update Features:

-Added DM8000 For [Normal Mode]
-Added RS232 Serial Interface Comunication
-Added RS232 Serial Interface Port Detection
-Added Embedded Flash Loader For 2nd Stage work
-Added Performing IMAGE Writing Operation [NFI] Bypassing 2nd Stage [Advanced Mode] + Flashing On [Normal Mode] (This features used for users that
have problems to comunicate with Network or that have Error on DM Lcd).
-Added Performing Bootloader Writing/Update Operation [NFI] Bypassing 2nd Stage [Advanced Mode] + Flashing On [Normal Mode] (This features used for users that have problems to comunicate with Network or that have Error on DM Lcd).
-Added [NO CA FOUND] Repair Option with Embedded bootloaders selection

Definitions :

Normal Mode : This mode for All features under ***STOP*** Mode with network connection only !

Advanced Mode: This mode for All features under RS232 serial comunication type + network connection after 2nd Stage & Supporting For now DM800 Original/Clone ! [Other models will be added soon] !

Main Features:

-Performing IMAGE Writing Operation [NFI]
-Performing IMAGE Backup Restore [NFI] [not ready yet]
-Performing Boot Loader Writing/Update Operation [NFI]
-Performing Manual/Auto Reboot
-Performing [Repair NO CA FOUND] & Other Errors

Quote from kerrs69

Hi Ten

Do you know why the openpli wallpaper screen stays on after full power down reboot.As ive said previous i have to select a *** encypted channel before i get video on any channel.

Its as if im starting something running by selected the *** encrypted channel.

This is now the 3rd box i have imaged all with the same issue.Apart from this its great.

Thanks

Display More

I didnt notice either of the problems you mention. I will test it some more this week & correct any problems i do find.

What config are you using in the CCcam.cfg ?

You will need to have the latest CCcam channelinfo to get up to date SID`s.

Tutorial : Convert CCcam channel info to Oscam.srvid for channel names in webif .

Load the latest Enigma2 setting like Catseye into dreamset and make a bouquet that has your channels only, then load this bouquet into CCcam SID Assigner v0.6.0 by B16MCC.

This will create up to date SID`s for your channels.

Just to confirm also different from the ports in use by newcamd
e.g
port = 10000@0963:000000,port = 10001@0963:000000

Quote from kemestri

yes i have oscam and cccam connected with N line but still second box not working when oscam is active

Do the ports used clash at all, also how have you made the fline for second box it should be like this.

In server box
F: box2 pass2

In second box
C: ip_of_server_box port box2 pass2

e.g 192.168.1.5

e.g 12000

On the server box you have cccam & oscam connected by nline, is this correct ?
If so then just share to the second box using cccam as normal.

Point your phone towards the *** and see on the live camera screen where the satellites are, any line of sight (LoS) issues and the look angles. Couldn't be easier to install your sat dish with this augmented reality satellite finder.

+ SCREEN Capture: show your customers no line of sight issues, save it to the sd card or email it to back office.
+ Works with all geostationary satellites
+ Works everywhere around the world
+ No Internet access needed to operate it (occasionally it is required)
+ Add, edit and delete satellites
+ Select favorite satellites
+ Azimuth, elevation and skew results

It sounds like something has changed in your configs, compare them to the ones you were originally using, it is easy to make changes using oscam web info without realizing it.