Posts by master G

It sounds like cccam is starting first stopping oscam from finding the card reader, check the entitlements in cccam info & see if you can see your card there.

Prince's Panel Full 7.5 By Persian Prince (Enigma2-OE1.6-Mipsel)

Release Date : 7-September-2011

Published By : Persian Professionals Team

======================
Available 26 Emulators
======================

enigma2-cam-persianpros-avatarcam_0.1-r2_mipsel.ipk
enigma2-cam-persianpros-camd_3.908L-r2_mipsel.ipk
enigma2-cam-persianpros-cccam_2.2.1-r2_mipsel.ipk
enigma2-cam-persianpros-dreamcrypt_1.2.3-r2_mipsel.ipk
enigma2-cam-persianpros-evocamd_2.17c-r2_mipsel.ipk
enigma2-cam-persianpros-firecam_0.1-r2_mipsel.ipk
enigma2-cam-persianpros-gbox_2.25-r2_mipsel.ipk
enigma2-cam-persianpros-gboxnet_1.0-svn798-r2_mipsel.ipk
enigma2-cam-persianpros-hypercam_2.15Full-r2_mipsel.ipk
enigma2-cam-persianpros-mbox_0.6-0010-r2_mipsel.ipk
enigma2-cam-persianpros-mgcamd_1.36-r2_mipsel.ipk
enigma2-cam-persianpros-mpcs_0.52.0-r2_mipsel.ipk
enigma2-cam-persianpros-newcs_1.70-r2_mipsel.ipk
enigma2-cam-persianpros-opencam_2.1.1-r2_mipsel.ipk
enigma2-cam-persianpros-oscam_1.10-r2_mipsel.ipk
enigma2-cam-persianpros-rqcamd_1.31-r2_mipsel.ipk
enigma2-cam-persianpros-rqcs_1.11-r2_mipsel.ipk
enigma2-cam-persianpros-rqechoclient_1.06-r2_mipsel.ipk
enigma2-cam-persianpros-rqsssp_1.04-r2_mipsel.ipk
enigma2-cam-persianpros-sbox_0.0.5-1-3-r2_mipsel.ipk
enigma2-cam-persianpros-scam_3.60-r2_mipsel.ipk
enigma2-cam-persianpros-scemu_1.8-r2_mipsel.ipk
enigma2-cam-persianpros-spcsnasscamd_2.5.45-r2_mipsel.ipk
enigma2-cam-persianpros-vizcam_1.15-r2_mipsel.ipk
enigma2-cam-persianpros-vucrypt_1.1.1-r2_mipsel.ipk
enigma2-cam-persianpros-wicard_1.08-r2_mipsel.ipk

==============
Script Manager
==============

- Swap Manager
- Mount Manager

-- USB
-- HDD
-- Mount
-- Format
-- UnMount

- Update Modules
- Delete Crash Logs
- IPK Server Manager

-- Size Check
-- MD5Sum Check
-- SHA1Sum Check
-- USB
-- HDD

- Picon Path Manager

-- USB
-- HDD

- Plugin Path Manager

-- USB
-- HDD

- Software Informations

-- Date
-- Swap
-- System
-- UpTime
-- Activity
-- Emulator
-- Host Name
-- Process List
-- File Systems
-- Kernel Version
-- Kernel Informations
-- Installed Packages Informations

- Hardware Informations

-- CPU
-- MAC
-- Memory
-- Free Space
-- Free Memory
-- Kernel Modules
-- HDD Performance

--- HDD Status
--- HDD Temperature
--- HDD Informations

-- Internet Performance

--- Ping
--- Netstat
--- NS Look Up
--- Trace Route
--- Reset Network
--- Use Open DNS - Temporary

- Timeshift Path Manager

-- USB

- Time Update
- OPKG Update + Upgrade
- Persian HD Project By Persian Prince - After Update

-- Fix Spinner
-- Fix Boot Logo
-- Fix Ajax Loader
-- Fix WebIF - Xtrend
-- Fix WebIF - Vuplus
-- Fix Remote Pictures - Xtrend
-- Fix Remote Pictures - VuPlus
-- Fix Remote Pictures - DreamBox
-- Fix Enigma2 Settings - Xtrend
-- Fix Enigma2 Settings - VuPlus
-- Fix Enigma2 Settings - DreamBox

==============
Backup/Restore
==============

- Plugins

-- Restore
-- USB
-- HDD

- Skins-Picons

-- Restore
-- USB
-- HDD

- CCcam Settings

-- Restore
-- Backup
-- Backup With Date
-- USB
-- HDD

- Enigma2 Settings

-- Restore
-- Backup With Date
-- USB
-- HDD

- Restore Skin.XML Backup
- Restore Language Backup

================
Emulator Manager
================

- Old Cams

-- GBox
-- RqCS
-- MPCS
-- FireCam
-- RqSSSP
-- RqCamd
-- OpenCam
-- EvoCamd
-- GBox.NET
-- Rq Echo Client
-- SPCS NassCamd

- Multi Cams

-- ScEmu + CCcam
-- SBox + CCcam/MgCamd
-- OSCam + CCcam/MgCamd/SBox
-- NewCS + Camd3/CCcam/EvoCamd/MBox/MgCamd

- Single Cams

-- SCam
-- MBox
-- Camd3
-- CCcam
-- WiCard
-- VizCam
-- MgCamd
-- HyperCam
-- AvatarCam

- Original Cams

-- VuCrypt
-- DreamCrypt

=========================
Keys - SoftCam Downloader
=========================

- Keys Downloader

-- Uydu
-- LuxSat
-- MiniCat
-- TechSat
-- PandaSat
-- SatAngels
-- DemoniSat
-- NewNigma2
-- MasterElant

- IRIB TV3 Keys Adder

- SoftCam Downloader

-- MiniCat
-- DVBFiles
-- SatAngels
-- DemoniSat
-- SatSharing

- CCcam Files Downloader

-- qpoe
-- comlu
-- sasa.000page

- Golden Union CCcam Servers

-- PersianPros G01
-- PersianPros G02
-- PersianPros G03
-- PersianPros G04
-- PersianPros G05

- CCcam.channelinfo To oscam.srvid Converter

-- qpoe
-- comlu
-- sasa.000page

- Keys - SoftCam Converter

-- XCam To MgCamd
-- EvoCamd To MgCamd
-- MgCamd To EvoCamd
-- MgCamd To NewCamd
-- NewCamd To MgCamd

=============================
Channel - Settings Downloader
=============================

- RR Settings
- Dona Settings
- Likra Settings
- Cyrus Settings
- Rytec Settings
- Cajton Settings
- AdelSat Settings
- Vhannibal Settings
- Farshadmb Settings

- Remove Channels - Settings

-- Remove Settings
-- Remove Channels
-- Reset Factory Defaults

- Data Channels Converter (*** 19.2E)

=====================================
Satellites-Terrestrial XML Downloader
=====================================

- DVB-C Official (cables.xml)
- DVB-C PaphosAL (cables.xml)
- DVB-S Clone (satellites.xml)
- DVB-S Gemini (satellites.xml)
- DVB-S SatXML (satellites.xml)
- DVB-S SatHunter (satellites.xml)
- DVB-S SatLoader (satellites.xml)
- DVB-S FastSatFinder (satellites.xml)
- DVB-S By Persian Prince (satellites.xml)
- DVB-T Official (terrestrial.xml)
- DVB-T By Persian Prince (terrestrial.xml)

====================================
Persian Tools For Persian People
====================================

- Persian Weather
- Tehran Traffic Map
- Persian Language Adder (Translated By Persian Prince)

=======
Cleaner
=======

- USB
- HDD
- Temp
- Key

=========
Installer
=========

- USB
- HDD
- Temp

- Xtrend Drivers-Modules - ZIP

-- ET5000HD
-- ET9000HD

- DreamBox Drivers-Modules - IPK

-- 7025
-- 500HD
-- 800HD
-- 7020HD
-- 8000HD
-- 800SEHD

- VuPlus Drivers-Modules - TAR.GZ

-- Duo
-- Uno
-- Solo
-- Ultimo

==============
File Extractor
==============

- IPK
- NFI
- ZIP
- RAR
- TAR.GZ

==================================================
Font Changer (DejaVuSans 2.33) - Supports 42 Fonts
==================================================

- Bold Font
- Normal Font
- Read Me Before Do Anything !

===================================
Default Channel Audio Configuration
===================================

- English
- Persian

====================
About Prince's Panel
====================

- Informations
- Last Server Update
- Upgrade To Latest Version

===========
File Hashes
===========

CRC32: 80BF1121
MD5: A9B0EECD61EA543861BD170250B4501B
SHA-1: 52069CF6009D37DFD8866C242CEEEC4E9C4973F9

==========
ChangeLogs
==========

- DVB-C "Official" and "PaphosAL" added
- Backup "Plugins" and "Skins-Picons" added
- "Xtrend Driver-Modules - ZIP" added (*)
- "DreamBox Driver-Modules - IPK" added (*)
- "VuPlus Driver-Modules - TAR.GZ" added (*)

* ability to download and install latest drivers automatically

- some "Shell Scripts" updated
- supports "Persian Weather 2.2" , stable version
- supports "EvoCamd 2.17c" , updated version
- supports "NewCS 1.70" , updated version
- supports 42 fonts (Font Changer)
- install/uninstall works good
- you can install it on any previous versions
- you can uninstall it via "opkg remove" command
- it will reboot your box if you do install or uninstall , don't worry

All 1.x , 2.x , 3.x , 4.x , 5.x , 6.x Versions Are Outdated/Unsupported

Please Remove Them From EveryWhere , Thanks In Advance

Isn't It Nice That "Persian Prince" Always Brings New Features For You ?

===========
ScreenShots
===========

https://persianpros.com/phdp/princepanel/ScreenShots/

##################################################################################

Feel Free To Contact Me : persianprince@persianpros.com

You Can Provide Direct Links For Settings , Satellites.XML , Keys , SoftCams , ...

I Will Add Them To The Next Version

Good Luck

##################################################################################

dflash_0.104

dFlash hast to be adapted for the new images, hence use 0.104 ONLY for testing with these new images.

Quote

I now have time to test the new build image with the-B flag is used for boxes where now the broadcom NAND Flash is installed in a 0104.

Please pass this first time on the boxes where there are new images using (se 800.800, 8000.500 hd) ONLY for those new images, it ensures that an old image because it will not boot kernel / loader / driver for the missing image!

For the old images continue to use the secure so 0103!

Only when we have extensively tested and it works properly with the new images I'm considering whether I install a corresponding recognition that there is again a dflash image types for both!

LG
gutemine

Display More

If you have ignored the Disclaimer and the box doesn't boot after Flashing it, please Flash the Dreambox with DreamUP as the Disclaimer says, and better enable recover bad sectors in DreamUP. And please don't spam the thread by asking all over again what you can do instead of doing it !

You can change the port to anything you like as long as its not conflicting with anyother protocols.

Have you setup the smargo with the windows tool that came with it to dreambox mode ?

Follow step3 from where we left off on post 4 of this thread, you can # out anything relating to logs in step 3`s script.

If you are using a linux pc server you dont need to worry about logfiles filling your HDD unless you have a very small HDD.

My oscam log has been running for months on VU+ and is still under 1MB.

In step 3 # out any lines in the script that have tail -8 /var/log/oscam.log and it will not create logs.

Try both and see what works best as that tutorial is not mine buddy, so not 100% sure.

Create the script;

vi /emu/oscam/oscript

and then paste this text to the file:

#!/bin/sh 
CAMNAME="Oscam Server" 
# end
# This method starts Oscam
start_cam () 
{ 
pkill -9 oscam.x86 
sleep 2
/var/oscam/oscam.x86 -c /emu/oscam &
} 
# This method stops Oscam
stop_cam () 
{ 
pkill -9 oscam.x86 
} 
case "$1" in 
start) 
echo "[SCRIPT] $1: $CAMNAME" 
start_cam 
;; 
stop) 
echo "[SCRIPT] $1: $CAMNAME" 
stop_cam 
;; 
restart) 
echo "Restaring $CAMNAME" 
stop_cam 
sleep 7
start_cam 
;; 
*) 
"$0" stop 
exit 1 
;; 
esac 
exit 0

chmod 755 /emu/oscam/oscript

Restart oscam.

In CCcam.cfg allow these;

ALLOW WEBINFO: yes
WEBINFO USERNAME :root #( change to your own )
WEBINFO PASSWORD :dreambox #( change to your own )

Try using CSstudio, its a much better tool for CCcam.

You could try this to keep oscam alive, How to: Oscam stop/start script + anti-crash monitor.

Quote

SERIAL READER : /dev/usb/tts/0 smartreader+

# out this line and restart the cam.

In CCcaminfo can you see then N line active like this ? ( port 10000 will be yours 44445 )

There are no errors to correct, can't open file is nothing to worry about as those oscam files are not needed to connect to CCcam.

Have you added the N line to CCcam.cfg and removed anything relating to cardreader ( boxkey & smartcard clock frequency ) ?

Oscam will read the boxkey on its own, but if you have the line BoxID= in oscam.server you will need to add your boxkey.

Thats why i have removed BoxID so it will read automatically.

When you are testing later view oscam webinfo or log files to see if there are any errors, will help us help you better.

If you dont know how to do this buddy just let us know.

Oscam.conf

global]
usrfile                       = /emu/log/oscamuser.log
logfile                       = /var/log/oscam.log
disablelog                    = 0
disableuserfile               = 1
fallbacktimeout               = 2500
nice                          = -1
maxlogsize                    = 200
preferlocalcards              = 1
saveinithistory               = 1




[monitor]
port                          = 988
nocrypt                       = 
aulow                         = 120
hideclient_to                 = 0
monlevel                      = 0
appendchaninfo                = 0




[newcamd]
port                          = 44445@093E:000000
key                           = 0102030405060708091011121314
allowed                       = 
keepalive                     = 1
mgclient                      = 0




# logging
#pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
maxlogsize = 1000




[webif]
httpport                      = 8080
httpuser                      = username
httppwd                       = password
httprefresh                   = 0
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients           = 0
httpreadonly                  = 0
httpsavefullcfg               = 0

Oscam.server

[reader]
Label                          = Viasat
enable                         = 1
Protocol                       = mouse
Device                         = /dev/ttyUSB0
services                       =
reconnecttimeout               = 30
CAID                           = 093E
ident                          = 093E:000000
Group                          = 1
EMMCache                       = 1,1,2
ecmcache                       = 1
blockemm-unknown               = 1
lb_weight                      = 200
audisabled                     = 1

oscam.user

[account]
user                          = user
pwd                           = pass
group                         = 1
au                            = viasat
caid                          = 093E
ident                         = 093E:000000

Here is the N line put it in CCcam.cfg.

N: 127.0.0.1 44445 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

You don`t need to open a port for oscam if you are sharing internally and using as cardreader.

New Version WebMedia v3.2

Thx pcd.

Quote

Right now I´m trying with the CCcam 2.1.4-Oscam combo.

If you want to continue using CCcam to control your server you will need to use CCcam2.1.3 and versions below to show the card as HOP0, all other vesions show HOP10.

Quote

At the moment I´m the only user, do I have to use N or L line in the configs now?

Oscam is the cardreader and CCcam controls the server, so the N line or L line will connect the two cams.

You will be able to create C and F lines as normal within CCcam for your peers.

Quote

First of all, do I need to use/change anything in the cccam config when I use Oscam?

Delete or # out anything related to cardreader in CCcam.cfg, add an N line or L line to CCcam.cfg depending on what protocol you use in oscam.

Quote

I know I have to change some in the oscam.config, server, and user right? Just have to figure out what.

Tell us what card you are trying to configure and we will find and modify the configs for smargo cardreader.

Quote

Im using Newnigma latest image.

Is oscam+CCcam2.1.3 installed as a combo or separate cams ?

Quote from babajohar

i dont have a serices = in oscam.server

Ok then i would delete all other files and replace your oscam configs so they are exactly as they were when you installed your server, something has changed. I could ask you to post all your configs but this way will probably be quicker.

Remove the line
services =
in the reader section of your oscam.server file if you have it there.