Posts by master G

changelog v.0.7-r2
- lang-folder fixxed (po changed to pl)
- menues recreated for better setup
- mainmenu-bug fixxed

Quote from newtolinux

so with that comment ten you are pretty much saying if you already have one of the big european providers i.e italia germany uk then you dont need to exchange shares at all . So my question is why do in that case people with them cards even share bother sharing. Simple ; because it is human nature to always try and better ones self. Why do we even bother with any of this ?? Because as you stated it is a hobby !! If you play rugby you always want to be better than the other team . If you play football you always want to be better than the other team. Human Nature !!!!!! What i dont get is people that have in excess of 50 peer/server connections to the server. Because as you quite rightly said only 1 pemium is needed. So why all them connections ; why do you need them. Why do people take from hop2 hop3 because it is human nature. A hobby is just that a hobby !! If we sat on our laurels and never strived to better ourselves or present ourselves with new challenges then there would be no hobby.

i refer again to this statement

"My point is simple & clear.
any single premium european sub will allow a hobbyist to watch every package via cs.
There is no argument, its a fact. "

So why then do people have in excess of 50 connections to there server . Human nature or greed or an other agenda !!

new2

Display More

New2 i am really struggling to understand you now.
I said with one premium package you will easily get shares of anything you want. In football of course you want to be better than the rest, in c/s we are sharing not competing, explain how you want to be better!
Do you have competitors ?
Is this more than a hobby for you?

Quote from newtolinux

if someone had the same sub 4 times over then this would certainly be a worry. I am not missing any point. 4 subs identical would be a worry for sure. would ring alarm bells. Best advise would be know your peers always have msn contact for them etc and only share if you need to like ten said. One premium package ( full package ) is adequate to watch all that you need

new2

My point is simple & clear.
any single premium european sub will allow a hobbyist to watch every package via cs.
There is no argument, its a fact.

Quote from newtolinux

Fair point ten if all the cards were for instance full packages and all current 24/7 at the same time. Best thing in this scenario would be one look at ecm's to make sure your peer is not faking the cards . Two check what actually opens ( this will determine which package your peer has ; for instance a *** italia card can be grabbed for £150 at mo on ebay for 6 months prepaid which is cheaper than most to be honest and would put you in a good sted for getting shares. Three ask the peer directly rather than jumping to your own conclusions.

new2

You are missing the point completely here, testing new shares is something everyone should/does do. Just because a channel opens doesn't mean the peer owns the card. Anybody who has been part of this hobby for a while will soon realize that a single premium package subscription is enough to watch any European package you want so why would any one pay the price of the sub 4 times over ?

Quote from newtolinux

Another great bit of advice would be to not have more than 1 local card. Otherwise you may be thought of as a payserver !!!!

Don't get shares just for the sake of it. You can only watch so much TV !!

Ping your peers once a week and it is good practice to make sure your peers dns's don't appear public in google otherwise they could have been hacked , a payserver etc etc.

New2

Display More

Having more than one local is perfectly acceptable,
but when you see a server with sly uk/it/ger/d+ locals you must stop & think how much are they paying every month or more likely,
how much are they charging people to watch your card ?
any one of these cards alone would give you enough to watch everything via cs do not be fooled by the bull.

Quote from ornontowice

in the image of rami maher what I use is no Pauli plugin, can i install this plugin in the image? so yes can anybody tell me how?

Ftp the file to tmp, then manual install via your images addons panel, i cannot guarantee it will work with your image.

Pauli Plugin

enigma2-plugin-extensions-pauli_0.6.12_all.ipk

===============================================
Version History
===============================================
Version 6.12- bugfixes to prevent crashes with lates Images
Version 6.11 - long/short Info
Version 6.10 - make Timer action patch more flexible - thanks weiherer
Version 6.9 - fix mediaPlayerActions - thanks southside
Version 6.8 - add repatch function
Version 6.7 - fix 50/60 Hz problem (hopefully)
Version 6.6 - add Rednax's trick for getting HD channel resolution
Version 6.5 - workaround for standby on boot
Version 6.4 - bugfixes to prevent crashes
Version 6.3 - use enigma2 resolution for SD/HD zapping
Version 6.2 - bugfixes to prevent crashes
Version 6.1 - add SD/HD resolution switch list
Version 6.0 - add Radio startup channel
Version 5.6 - add audio delay
Version 5.5 - add Plugin List reload and PVR Play symbol patch
and artwork from Nemesis
Version 5.4 - add zapping with OK in EPG and < > in Listbox
Version 5.3 - add forgotten BACK/FORWARD, and pageUp/Down
Version 5.2 - add keymap save/restore
Version 5.1 - add more Neutrinos
Version 5.0 - Use AliAbdul's code for keymap switching
Version 4.9 - Up/Down swappable in Neutrino Mode
Version 4.8 - Page changeable in Listbox
Version 4.7 - Page Up/Down changeable in Listbox
Version 4.6 - Keymap switch without restart - thanks AliAbdul!
Version 4.5 - enigma2 restart optional, default Timer action
deepstandby
Version 4.4 - fix Channel on Boot bug
Version 4.3 - support Power Down short also with new images,
and add Standbyonboot
Version 4.1 - use all config.tv settings
Version 4.0 - Change Systemtime
Version 3.0 - Current Channel as Startservice
Version 2.1 - enabel/disable the Record Timer Info
Version 2.0 - toggle the Powerbutton between Standy and
Deepstandby
Version 1.0 - first version

===============================================
HOW-TO
===============================================

Hello, hard-core fans of the Neutrino style remote control
keys layout. With the Pauli Neutrino Keymap Plugin for the
DM 7025/800 you can easily toggle in an Enigma2 image
between the Enigma2 and the Neutrino style keys.
You can also change lots of other small things like toggle
the Standby with DeepStandby Funktion and you can disabel
or enable the Record Timer Info Popup.

Why Pauli ? Wolfgang Pauli was an Austrian physicist who
discovered the Neutrino particle.

Neutrino Keymap for the Remote control:
---------------------------------------------------------------------------

various possibilities to adapt the remote control to your
needs. Besides the 2 predefined key layouts "Enigma2" and
"Neutrino" are other minor changes possible which you can
find in the menu screen.
===============================================

Enable/Disable Standby on boot:
---------------------------------------------------------------------------

the box starts, but goes directly into standby mode
===============================================

Enable/Disable Deepstandby with Power long/short:
---------------------------------------------------------------------------

If you prefere to put your dreambox directly into deep standby
===============================================

Enable/Disable of the Record Timer Info popup:
---------------------------------------------------------------------------

on special request for the people who are annoyed by this
info popup when a timer starts a recording
===============================================

Standard Timeraction deepstandby
---------------------------------------------------------------------------

who preferes that after a recoding the box goes into
deepstandy as the default action when adding a timer here is
the possibility to change it this way.
===============================================

Current Channel as Starting Channel:
---------------------------------------------------------------------------

current Channel will become the starting channel which is
tuned on booting the box. Interesting for example to get the
current system time properly ! Now also with teh possibility
to choose the last radio channel as starting channel. So you
can use the box as a radio clock (e.g together with the
Elektro Plugin)
===============================================

Changing of System Time:
---------------------------------------------------------------------------

allows you to manually change the date and the time of the box
===============================================

Audio Delay
---------------------------------------------------------------------------

Users who use the digital audiosignal via a Toslink cable to
a an amplifier offen have complaints about non-lip-synchronity.
Now you can get by presing the audio button an extended audio
menu where you can choose some delays for manual correction.
===============================================

SD/HD resolution
---------------------------------------------------------------------------

The standard way to change the resulution is within the
enigma2 Menu/Settings/AV-Settings for all channels. It would
be great if the resolution could be set for every channel,
especially the HD ones. Via Enigma2 Menu/Information/Channel
you can ged the needed informations (Service reference,...)
out of Enigma2

Pauli now usesa "*.channels" liste from which it gets
a) the Service reference (and for information purpose it
contains also the channel name) and b) via the filename
of the liste (720p.channels or 1080i.channels) it identifies
the correct reslution. Based on this lists it then changes
the resolutions in the DM800 when you are zapping.

These /etc/enigma2/*.channels files can be edited/adapted
by yourself in the scheme which you can see from the
existing values.
===============================================

********************* !! Attention !! ********************

for adding the Audio Delay and SD/HD resolution feature the
file /usr/lib/enigma2/phyton/Plugin/Screens/InfoBarGenerics.py
is patched.

If you do a Softwareupdate of your image this file will be
over written with a new one and hence all changes that Pauli
did to it get lost. You have to re-install Pauli to get this
Patches back in this case.

===============================================
And now have fun using Pauli on your DM 7025 / 800 / 8000!
===============================================

Quote from scorpionoir009

hi could you please tell how to run the script: )

with this command

/tmp/CCcamOscamInstall.sh

Thanks markez, glad you are enjoying the forum, thats what we like to hear.

Nice one Njl glad you are sorted mate.

There is a problem with this card at the minute, have a read of this thread Protect your s@y italia card !!!!!!

You should try the advice you have been given and try using usuals.
Also since you cannot be bothered to do it yourself.

Satellite installers in yorkshire

We will try to help you as much as possible as a forum but you sound like you want somebody to turn up and do every thing for you. There is obviously nothing wrong with your reading or typing so start reading & learn something.

Rant over

I have just read that the prepaid cards can be activated in cccam by leaving your receiver on tp1, i would first contact the seller as there may be an activation signal that needs to be sent.

Quote from arcadia

Could it be in the Positioner Setup ,where it says Positioner Storage 1 .Could it be in Default services lists ,or could downloadind E2 Settings 2 Sats 16 July 2011 [ Black Hole E2] able to fix it.

If you are using usals then you dont need to use positioner setup, its only used for manually storing positions.

Login to your server as root user with putty.
Copy & paste in the code in step 1.
A new window will open, copy & paste in the code from step 2.
Press ctrl & o then ctrl & x, this will save and exit back to original screen.
From there just copy & paste in the rest of the codes.
Done!

Quote from humphrey3000

No I've left it in there glenviewjf. Only taken out the cline which I thank you for putting me right on. Could it have been the typo difference between your version of my fline and the one I used?
Thanks also to Ten Below and previous posters for being really helpful along the way here. I can't tell you how much more interesting this has been when you know someone is there ready to help. It's fantastic!

Can you bare be with me just a couple of more posts to see me get off the ground a little bit further :)

I've followed Ten Below's instructions above to check entitlements by clicking on the icon circled, but I don't think I'm even entitled to a glass of water! :0. I assume I should see a list of things quite interesting but instead I only get:

->[videoguard2-reader] type: VideoGuard B***B (0963), caid: 0963
[videoguard2-reader] serial: 0xCxBx6x, BoxID: 001x1x1x, baseyear: 1997

Does that mean it's over for me? Instead of proceeding to the Working Local(s) Forum am I going to be directed to the "GoToCoventryUntilYouHaveSomethingInteresting" Forum?

Ahh well...

Display More

Below that info you should see several lines that look something like this like this

videoguard2-reader] tier: 1234, expiry date: XXXXXXXX

Leave it on one of those channels for some time & it may come to life, if you have the original sly box this may be worth a go also.

How to force updates to your sly card

If none of the above works its not the end of the world as you can still use

No Local But I Like To Experiment

Quote from glenviewjf

It seems you may have a problem mate!

The line you sent me has never been active..

Although putting the cline you sent me in your own cfg along with the fline is probably the problem!

I can confirm Humphrey has everything working, you may want to check your own end though lol.

So you are ready to share but first make sure the card is working, try the following channels Pick TV, Five US, Five*.
If they do not open look at the entitlements in oscam web info by doing the following.

In your web browser type

http://[COLOR='#FF0000']IpOfDrembox[/COLOR]:8888/

E.G 192.168.0.9

Click Readers

Then view entitlements

This will show you if the card is still active.

If all is good your next stop is here to let us all know you have it working. beer10

Working Local(s) Forum