Posts by master G

You add the config files to /etc/tuxbox/config/
You havn`t said what package you are trying to install, let us know and we can find the configs for you.

Teamviewer is used only as a last resort, which card do you require configs for?

You can download the oscam+CCcam2.1.3 combo from the addons panel, Dream elite is the only image im aware off that you can do it this way.
Or you can add the oscam binary manually to /usr/bin/ chmod 755 and edit the CCcam2.1.3 script in /usr/camscript/ with the attached file.
The script allows you to use softcam manager to restart oscam+CCcam, it starts oscam first then CCcam 15 seconds later.

Follow this guide, How to install an ipk on any enigma2 receiver

Youtube made some changes to their feed, My TubePlayer has been fixed and you can find the latest version ~ My Tube Fixed 5/8/11

Mytube fix: 06/08/2011

I have updated the link & sent you a pm to say i had done so well before you posted this.

Regards
Under ten beer10

We missed your openbox expertise, nice to have you back hooley.

An nline from newcamd can be entered in the dm500 cccam.cfg if this is what you are asking.

I`m not sure how to setup openbox as newcamd server, why not run the dm500 as server and openbox as client.

Download Dreamup

The flash process is explained in part2 of this guide.
Dreambox DM-500 DM500 DM500S Setup Guide Instructions
Any probs just ask.

Remove old version before installing.

You could check that the recording path is actually recording to /media/hdd/movie, it could be set to somewhere else.

Hi MaryQ, here are two threads which will have some interest to you.
HOW To make Cccam and NewCs fully work
How to configure NewCs + Cccam accurate

You need to take a look at this thread, How to setup two (LISTEN PORT & Host name) in one Cccam.

Diema is not working for me.

Nova Sport (bulgaria) is working ok on 39E.
What other channels have 3pm kickoffs and i will test them.

Quote from sunlight786

please write the whole proceess in details as you do normaly so we can follow.

Omnikey readers are not ready to go using this auto install script but installation is simple just follow this guide.

How to install Omnikey readers on Linux PC

Wifi Plugin

Description:

What's new in 1.2:

- a signal strenght, noise measurement and so on.
- support for an adhoc connection.
That's a peer-to-peer connection without a router.
Nice for testing...
- after stopping the wifi interface you don't need to start the plugin twice.
Thus, a bug fix.
- the buttons are a bit changed.
"Save" is to save the settings but the plugin will not quit.
So you can check your link status directly.
Use "exit" to quit the plugin (after saving if you want to preserve the settings).

These adapters are supported and tested:

{PRISM_USB_DEVICE(0x04bb, 0x0922, "IOData AirPort WN-B11/USBS")},
{PRISM_USB_DEVICE(0x07aa, 0x0012, "Corega Wireless LAN USB Stick-11")},
{PRISM_USB_DEVICE(0x09aa, 0x3642, "Prism2.x 11Mbps WLAN USB Adapter")},
{PRISM_USB_DEVICE(0x1668, 0x0408, "Actiontec Prism2.5 11Mbps WLAN USB Adapter")},
{PRISM_USB_DEVICE(0x1668, 0x0421, "Actiontec Prism2.5 11Mbps WLAN USB Adapter")},
{PRISM_USB_DEVICE(0x1915, 0x2236, "Linksys WUSB11v3.0 11Mbps WLAN USB Adapter")},
{PRISM_USB_DEVICE(0x066b, 0x2212, "Linksys WUSB11v2.5 11Mbps WLAN USB Adapter")},
{PRISM_USB_DEVICE(0x066b, 0x2213, "Linksys WUSB12v1.1 11Mbps WLAN USB Adapter")},
{PRISM_USB_DEVICE(0x067c, 0x1022, "Siemens SpeedStream 1022 11Mbps WLAN USB Adapter")},
{PRISM_USB_DEVICE(0x049f, 0x0033, "Compaq/Intel W100 PRO/Wireless 11Mbps multiport WLAN Adapter")},
{PRISM_USB_DEVICE(0x0411, 0x0016, "Melco WLI-USB-S11 11Mbps WLAN Adapter")},
{PRISM_USB_DEVICE(0x08de, 0x7a01, "PRISM25 IEEE 802.11 Mini USB Adapter")},
{PRISM_USB_DEVICE(0x8086, 0x1111, "Intel PRO/Wireless 2011B LAN USB Adapter")},
{PRISM_USB_DEVICE(0x0d8e, 0x7a01, "PRISM25 IEEE 802.11 Mini USB Adapter")},
{PRISM_USB_DEVICE(0x045e, 0x006e, "Microsoft MN510 Wireless USB Adapter")},
{PRISM_USB_DEVICE(0x0967, 0x0204, "Acer Warplink USB Adapter")},
{PRISM_USB_DEVICE(0x0cde, 0x0002, "Z-Com 725/726 Prism2.5 USB/USB Integrated")},
{PRISM_USB_DEVICE(0x0cde, 0x0005, "Z-Com Xl735 Wireless 802.11b USB Adapter")},
{PRISM_USB_DEVICE(0x413c, 0x8100, "Dell TrueMobile 1180 Wireless USB Adapter")},
{PRISM_USB_DEVICE(0x0b3b, 0x1601, "ALLNET 0193 11Mbps WLAN USB Adapter")},
{PRISM_USB_DEVICE(0x0b3b, 0x1602, "ZyXEL ZyAIR B200 Wireless USB Adapter")},
{PRISM_USB_DEVICE(0x0baf, 0x00eb, "USRobotics USR1120 Wireless USB Adapter")},
{PRISM_USB_DEVICE(0x0411, 0x0027, "Melco WLI-USB-KS11G 11Mbps WLAN Adapter")},
{PRISM_USB_DEVICE(0x04f1, 0x3009, "JVC MP-XP7250 Builtin USB WLAN Adapter")},
{PRISM_USB_DEVICE(0x0846, 0x4110, "NetGear MA111")},
{PRISM_USB_DEVICE(0x03f3, 0x0020, "Adaptec AWN-8020 USB WLAN Adapter")},
{PRISM_USB_DEVICE(0x2821, 0x3300, "ASUS-WL140 Wireless USB Adapter")},
{PRISM_USB_DEVICE(0x2001, 0x3700, "DWL-122 Wireless USB Adapter")},
{PRISM_USB_DEVICE(0x2001, 0x3702, "DWL-120 Rev F Wireless USB Adapter")},
{PRISM_USB_DEVICE(0x50c2, 0x4013, "Averatec USB WLAN Adapter")},
{PRISM_USB_DEVICE(0x2c02, 0x14ea, "Planex GW-US11H WLAN USB Adapter")},
{PRISM_USB_DEVICE(0x124a, 0x168b, "Airvast PRISM3 WLAN USB Adapter")},
{PRISM_USB_DEVICE(0x083a, 0x3503, "T-Sinus 111 USB WLAN Adapter")},
{PRISM_USB_DEVICE(0x2821, 0x3300, "Hawking HighDB USB Adapter")},
{PRISM_USB_DEVICE(0x0411, 0x0044, "Melco WLI-USB-KB11 11Mbps WLAN Adapter")},
{PRISM_USB_DEVICE(0x1668, 0x6106, "ROPEX FreeLan 802.11b USB Adapter")},
{PRISM_USB_DEVICE(0x9016, 0x182d, "Sitecom WL-022 USB Adapter")},
{PRISM_USB_DEVICE(0x124a, 0x4017, "Pheenet WL-503IA 802.11b USB Adapter")

How to install:
Unzip the zip file using the directory structure and store the files on the dreambox.
The files are already in directories like var and var/plugins so that's not too difficult.
You must edit the file manually /var/etc/init if you want to startup the plugin automaticly during booting:

/var/wifi/wifistart.sh

You need to post the log showing us the error and your configs so we can help edit them.