Posts by master G

24/11/2010

CCcam-2.2.1 for Technomate 500/600 with Ur image

:download:

Spotted this today, 12 month red hot sub for ?55.
The cheapest i have seen it anywhere from wizard sat HERE

Have you checked the c line is still in the cccam.cfg on the dm800..
Also check cccam info from your debian server to see if its recognising the share on your network..

Ten i know two differant people that use this model,,
DEVOLO 1145 dLAN duo HomePlug Adaptor Starter Kit..they got them from pc world for under ?50

Since you have enabled dhcp has the ip address of the dm800 changed ?
Check to see if the port is still open..

I checked the solwise website HERE and there is a setup utility that needs to be run on your pc.

Turn on DHCP in the communication settings on the dm800,, reboot everything and check to see if its being recognised..

While were on the subject i need to get a pair to use my dm500 in the bedroom, can anyone recommend a good make.

I bought a set for my dad and they were plug and play,, no drivers or special installation needed..
With one plug the ethernet cable connected the router and the other plug connects the dm500.
So you would need two sets of plugs if you wanted to connect both the dm500 and dm800.

Just swap the x86 file, chhmod the new one 755 reboot and your done.

If it does what it says on the tin then please forward the link of where we can find one.
Ideal for a backup should my own give up.

?22, keep us updated when its running.
Back of a lorry or ?20 P&P? haha

Quote from al1968

I think i read somewhere you have your card overclocked in your smargo, if you don't mind what do you have it running at?

and i just wondered roughly how high i could run mine at.

Should be no problems at that speed mate, are you having trouble?

Quote from tennents

its not on the other espn in the all programs in services its just i never seen it before lol

Your watching the pub channel mate,Beer1

your card will work fine using via4 cccam mate,
If there are any probs activating the help is here.

Why not try to download a channel setting from the vix server/ plugins panel..
I use dreamset from HERE with no problems at all..

This is my settings in the av menu...

The early feedback on this one is exellent on this one guys, let us now how you get on with it.

Online EPG for Commando12 Dreambox 500 Satellite Image

install:
ftp install.tar to /var/etc/ then reboot box to install

required:
reboot box prior to processing epg to free box memory!
box must have an active connection to the internet!

press BLUE BUTTON > BLUE BUTTON > RED BUTTON to add current channel to the processing list for online epg.

select Load Online EPG at StartUP>ON and reboot box to have online epg auto download and run 60 seconds after you turn your box on. this is the recomended option!

edit the following files to modify the /var/etc/e1_UK.dat channel list file during a new channel list download process:
/var/etc/e1_UK_add.dat
/var/etc/e1_UK_delete.dat

:download:

Hi guys i have worked very hard to bring you my all new Enigma I settings for 28.2E with corresponding Licher Picons fixed by me to correct Channel refs and delete UN-needed ones.

Licher Picons have been fixed by me to delete all old and UN-needed ones and fixed some incorrect refs. [SBO & Anytime added] [please note this picon set is same as E2 set containing HD picons too]

*All Channels correspond perfectly to the SLY SD Box.
*Sly Box Office completely fixed all 50 SBO channel numbers correspond perfectly to the SLY SD Box.
*Sly Anytime SD channels added in own bouquet. Tested and working
*A test bouquet has been added with channels in test.
*Radio channels have been added and channel numbers added to corespond perfectly to SLY SD Box.

Please note all regional channels on main bouquet are based on London

:download: