Posts by Rizin

Was redest du?

Seit wann wird hier Deutsch gesprochen?
Wenn du nicht weisst wozu die Datei gut ist, wieso kommentierst du überhaupt diesen Beitrag?

i need for mipsel

is this 1 file the same like this 2 what i have write in message? thanks

hello, where i can finde this files:

libcrypto-compat-1.0.2 (1.0-r0).ipk

libcrypto-compat-1.1 (1.0-r0).ipk

i search them in ipk format, thanks

on dm 500 v1 the openpli 8.3 image works good and the full backup script works too, and flashing back the .nfi from full backup works too.
but thats for v1 box.

Problem is only the image for v2 box. but now i using alternative the openatv 7.2 and all works good. thanks to everybody for help

yes i know, thats why i have asked Aliraza, because he send me a link to a IPK File, but he said he flashed the Bootloader after he flashed his backup image.

Quote from Aliraza63

Just a tip try it .

Update image via browser but dont restart the box.

Now send the ssl 89 loader via browser again and now restart the box .

check it .if it works

how you can send .ipk bootloader via browser to the box?
thanks

Quote from toysoft

Tried to build the backup on the DM500HDv2, with the built-in bin ssl (88), and also the ssl (89), same result, backup is built successfully but once flashed the box doesn't start.

If the backup tool works with the OpenATV, I find strange it doesn't with the OpenPLi... so no clue why the successfull backup fails then to boot the box.

TS

yes thats what i saying.... after once flashed the box doesn't start....

but with openatv works perfect, backup making and flashing... and all

Quote from toysoft

Quote from Rizin

Just refresh my memory,

Did you download and installed our image, and done a backup ?

Code

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm500hdv2.nfi

TS

Display More

yes i flash this image, but after flashing the box dont start. perhaps i must ssl89 again after flashing with this image, i will try like alizara says

Quote from Aliraza63

Just a tip try it .

Update image via browser but dont restart the box.

Now send the ssl 89 loader via browser again and now restart the box .

check it .if it works

ok i will try it, send me ssl89 loader what one u are using for refresh after you flash the image back.

hello again i today tested this bouth images:

openpli-12.3_dm500hdv2_original_20230729.zip

openpli-11.3_dm500hdv2_original_20220714.zip


the 12.3 from 29.07.2023 have same problem like the version what is some months later made... it works but not possible to make full backup without problems, at booting the nfi image.

and the openpli 11.3 dont booting. so its a faulty image.

thats what i can say for now, the only normal image what works and where is possible to make full backup is openatv 7.2

all others not work or not possible to make full backups with them.

ok understand, thanks, i will try today this other versions

openpli-12.3_dm500hdv2_original_20230729.zip
openpli-11.3_dm500hdv2_original_20220714.zip

and perhaps in this version i can make full backup what can later booting normaly, will let you know. ;)

hello, today i have time to try it. i flashed the image what you send in the url link. but after flashing the box dont booting. it stay on the dm500 picture.

this is what i can tell, for now the openatv image 7.2 works ok, and works to backup it with the script what you send here.
./backup.sh /hdd

after making a fullbackup of openatv, i try to reflash it, and it works. it boots normaly.

but same procedure i do at openpli 12.3 and it not worked. ;)

Sorry my Fault. Link Works i will try it in next days...

when i go on the link, i get this picture

here update...
1.
this message:
INVALID IMAGE (YOU NEED A IMAGE WITH AT LEAST 2ND #89)

i get when i try to flashing "secondstage-dm500hdv2-89.nfi" from ourdreambox i have download it.
perhaps the file is not ok? i am not sure, but it not works with my box.

2.
i have also try like you said:
make new backup with this: ./backup_original.sh /hdd

But after that doing, the box make new nfi file and all is 100% ok, but after i try to flashing the box, the box is dead after flashing. haha
so i must repair it with dreamup and flash a normal image to make it working. after flashing original dreambox image, box works again.

3.

i have tryed to flash this file too:

openpli-enigma2-8xstar-20230624-dm500hdv2_Original.rar

from the link (ourdreambox) what you send me, after flashing with this box is again, flashed 100% but after starting it dont boot. it stay on the dm500 picture.

so i have tryed now all options

when i flash openpli-enigma2-12.3-dm500hdv2.nfi, the box booting normal without problems, but only when i flash the original download file.
so there can not be a problem at my side if this file normal works, i think there is some problem in the image, to not allowing making full backups after once installed.

4.

i tried this image too: DM500HDv2 : OpenPLi 8.xStar 20240319 GSt 1.20.5

openpli-enigma2-8xstar-dm500hdv2_Japhar

but same result... with not booting after box flashed. it stay on the dm500 picture and not booting....

5. now i tryed openatv-7.2-dm500hdv2-fhd-20230201.nfi
this image works after flashing, it boots normaly. same like openpli-enigma2-12.3-dm500hdv2.nfi

here is screenshot of it

1000%

Because all other v2 Images works on it.
And i have checked the bootloader before Flashing. Its SSL89

Thank you i will test it again and let you know...

I have now first... flash the self made full backup. And after webinterface was at 100%, i dont reboot box, i go back i try to flash the ssl 89 bootloader.

but it gives me this error:
INVALID IMAGE (YOU NEED A IMAGE WITH AT LEAST 2ND #89)

now i will try the other steps...

Interesting Update....

I have do now full backup with backupsuite from plugin download.
same problem... the nfi is 100% made, but after flashing this NFI normal from webbrowser, after 100% flashed, box is not booting. only shows picture of dm500hd and thats all.

and i try Automatic Fullbackup 7.0 ipk install. and same all like before, box is not booting. with the prodused NFI File from Full Backup.