Posts by pheonix

update dm500hd, dm800se, dm8000, dm7020hd and dm800 hardware drivers

- fixed overflow on aspect ratio calculation
this fixes possible wrong scaled content

- fixed scale factor calculation for dm800
i.e. fixes wrong scaled IPTV services

- fixed non transparent framebuffer after bootup
this fixes not visible bootlogo before e2 starts on dm800

update dm500hd, dm800se, dm8000, dm7020hd and dm800 hardware drivers

- fixed overflow on aspect ratio calculation
this fixes possible wrong scaled content

- fixed scale factor calculation for dm800
i.e. fixes wrong scaled IPTV services

- fixed non transparent framebuffer after bootup
this fixes not visible bootlogo before e2 starts on dm800

update dm500hd, dm800se, dm8000, dm7020hd and dm800 hardware drivers

- fixed overflow on aspect ratio calculation
this fixes possible wrong scaled content

- fixed scale factor calculation for dm800
i.e. fixes wrong scaled IPTV services

- fixed non transparent framebuffer after bootup
this fixes not visible bootlogo before e2 starts on dm800

update dm500hd, dm800se, dm8000, dm7020hd and dm800 hardware drivers

- fixed overflow on aspect ratio calculation
this fixes possible wrong scaled content

- fixed scale factor calculation for dm800
i.e. fixes wrong scaled IPTV services

- fixed non transparent framebuffer after bootup
this fixes not visible bootlogo before e2 starts on dm800

update dm500hd, dm800se, dm8000, dm7020hd and dm800 hardware drivers

- fixed overflow on aspect ratio calculation
this fixes possible wrong scaled content

- fixed scale factor calculation for dm800
i.e. fixes wrong scaled IPTV services

- fixed non transparent framebuffer after bootup
this fixes not visible bootlogo before e2 starts on dm800

your getting your self a wee bit confused my friend.

as Ten Below has said if you have installed the cam and you can see it in the softcam manager via the blue button, you have no further need of the .ipk file ( a ipk file is just the same as a windows .exe install file / once it's installed it's programe the .exe is of no further use ).

what you need to do now is setup your CCcam.cfg ( config ) file and place it into /ETC on the receiver so that the cam can read the details and do it's magic.

people will reply to and post in threads that interest them. others prefer to read rather than jumping in to a thread asking a question that may have already been answered. others such as my self well i'm just a total post whore and i tend to accumulate a rather high post count where ever i go but the vast majority of my posts will be images / picons / bouquets and other such download related posts, along with the odd bargain that crosses my path and where i can help in the areas i know i will.

as far as this site goes it's a rather active one for a satellite and general interest forum, where i know of plenty that may have 25 members through the forum all day in a 24 hr period, you have no worries on that score here.

Also worthy of note, the OP of this thread has him self only accumulated 3 posts since February so he must not have been overly bothered after all. ?

really looking forward to XBMC my self and the VU+ apps. this for me will be a total DM killer.

My apologies to the staff as i know there is already a thread here for this in this very section but as it's a locked thread i can not reply or update it.

- added "start in background" in oscam start configuration - default: enabled

Quote

Mgcamd mips and ppc binaries based on the last public version 1.35a patched by D2MAC.

1.37 - Removed this very annoying log message: "[mgcam] read error error 145: Connection timed out"
Added Zee TV support -
Use attached replace.list and write "I 626 XX 16B_key" instead of "I 608 XX 16B_key" into the SoftCam.Key
Small fixes in the ppc version

sorry dont have time to make a full reply as it's me birthday and i'm off to get smashed but the single best place to fine info on jailbreaking and all things iphone is

http://www.iphonehacks.com/

Quote from cazuela

PLEASE ,PLEASE ,PLEASE USE THE SEARCHBAR AS YOUR QUESTION MAY HAVE BEEN ANSWERED PREVIOUSLY!!!
EXAMPLE: http://linuxsat-support.com/ca…ge-dreambox-password.html
Its as easy as that!!!

it's all good and well asking people to use the search bar ( and i agree with you ) but it wont change the way most users operate on forums, i have used and staffed forums such as this one for well over 15 years and it's the same now if not worse as it always has been. people who spend a good deal of time on forums such as my self will always use the search bar but the hit and runners will not and sadly there is very little any of us can do about it.

personally i find it easier to either navigate the user to the thread which already deals with the question or answer it any way. unless of course it's one of the many that pop up every flaming time a frequency change is performed on $ly those just pee me rite off.

iCVS-Image-DM500hd-06.09.2011

PLEASE UPGRADE THE BOOTLOADER USING ONLINEUPDATE AND RESTART YOUR BOX BEFORE INSTALLING THESE IMAGES

iCVS image from 24.03.2011

Version details:
Enigma2 from 06.07.2011
Plugins from 06.09.2011
Skins from 06.09.2011
Treiber from 02.09.2011 (DM500hd, DM800, DM800se, DM8000)
Treiber from 06.05.2011 (DM7025)
Secondstageloader 84 (DM500hd, DM800, DM800se, DM8000)
Secondstageloader 83 (DM7025)

Experimental / own update feed

Extras / included changes:
- Gemini plugin reade (GeminiWizard already included)
- switch ON/OFF EPG-Progress in %, adjoustable in the customization menu
- Set space between channelname and EPG info, adjoustable in the customization menu
- Picture-rotation if exif tag available, adjoustable in the customization menu
- dcccamd removed from the image
- sambaserver removed from the image
- own iCVS bootlogos by yvessun
- Support for Smargo usb Cardreader FTDI_SIO and PL203
- CrossEPG Release 179
- Spinner fix (bootlogo)
- Startvolume set down to 30%
- Expert mode as standard in the customization menu
- Adapted view in screen HelpMenuList
- GraphMultiEPG incl. Picons
- GraphMultiEPG colored
- Adapted view in screen PluginList
- iCVS adapted Keymapxml
- Adapted view in screen Pictureplayer
- Adapted view in screen Serviceinfo
- Adapted view in screen Movielist
- Adapted view in screen ClockToText
- Change of Yes/No in the startwizard at the child safety pin question
- MHW EPG activated
- Ready for Karatelight from @mamba0815 and LowFat from @gutemine
- DVD Burn removed from 8K image, can/should be installed over the feed.
- rt2570 and rt3070 WLAN
- IPv6 and CPU FREQ Kerneladaptions
- myChannelSelection by @adenin
- listbox_fix by @adenin
- on/off bouquet + button (direct access to the bouquet with +, selectable in menu -> customize

Further Informations:
There are no Cams, Cam Configs, Settings,... availabe on the feed.
This image can be used as a base for the Gemini plugin.

Although can be installed userscript, if you don't want to use the Gemini plugin.

http://www.megaupload.com/?d=108ZGSLE

or if your using windows 7 / vista and have telnet enabled ( it's disabled by default )

bring up a command window by hitting the windows button and typing CMD into the search bar, this will open a windows command prompt window then type telnet and hit enter you should now see the windows telnet prompt.

type o<space>followed by the ip of your receiver for example

Quote

o 192.168.0.19

then enter your user name as asked usually this is root then as instructed above enter passwd and follow the same procedure. i use this method my self rather than a third party telnet client.

another wee update for the licher 28.2 HD pack

latest pack for E1 06-09-2011

Quote from n@ser

Temporary injunction
09.05.2011
Temporary injunction against Satco Europe
Dream proceeds against trademark infringements

Dream Multimedia, the leading supplier of Linux-based set-top boxes, has brought a temporary injunction against Satco Europe GmbH. At the Anga Cable show in Cologne, Satco presented, among other items, its TV player VU+ Duo, and promotion for this infringes the brand rights of Dream.

Satco is illegally using the designation „Enigma“, which is a registered brand name of Dream. In an advertising flyer, Satco promotes the Linux operating system installed on the VU+ with the designation „Enigma 2“. Moreover, the designation „Enigma“ appears when the set-top box boots up.

With the temporary injunction, the district court in Düsseldorf prohibits Satco from using the designation „Enigma 2“, including offering for sale set-top boxes equipped with operating systems so designated. Contravention of the court order can lead to a fine of up to 250.000 Euros, or a prison sentence of up to six months.

This court order is only the first step. In future, Dream also plans to proceed against other producers who illegally use brands owned by Dream.

Dream spokesperson Alpaslan Karasu: „We will definitely no longer stand around and watch while competitors exploit our good name in order to sell their products.“

district court of Dusseldorf, 2a O 140/11

The district court of Dusseldorf enacted the temporary injunction without hearing of Satco Europe.
Satco Europe can object to this.

Code

[url=http://www.dream-multimedia-tv.de/en/temporary-injunction]Temporary injunction | dream-multimedia-tv.de[/url]

Display More

VERY very old news so i'm not really sure why it's been posted now or in this thread for that matter.

Quote from ILM16

Worked fine and well packaged, so it's easy to put back and return. :smile:

To be honest i'd seriously recommend you keep the cable, they can be a real life saver when things go belly up and you never know when your going to need it again ( which i bet you will one day ).

dm800se

dreambox-secondstage: update dm800, dm800se, dm500hd, dm8000 2nd stage loaders
dm8000: compatibility for other 256MB flash chips (EOL of old type)
dm800, dm800se, dm500hd: added enhanced flash error correction (only used with new firmware images)

http://sources.dreamboxupdate.com/opendreambox/1.6/dm800se/experimental/dm800se/dreambox-secondstage_84-r0_dm800se.ipk

THIS SSBL IS FOR GENUINE DREAMBOX RECEIVERS ONLY DO NOT USE ON CLONE MACHINES.

dm800hd

dreambox-secondstage: update dm800, dm800se, dm500hd, dm8000 2nd stage loaders
dm8000: compatibility for other 256MB flash chips (EOL of old type)
dm800, dm800se, dm500hd: added enhanced flash error correction (only used with new firmware images)

http://sources.dreamboxupdate.com/opendreambox/1.6/dm800/experimental/dm800/dreambox-secondstage_84-r0_dm800.ipk

THIS SSBL IS FOR GENUINE DREAMBOX RECEIVERS ONLY DO NOT USE ON CLONE MACHINES.

dm800hd

update dreambox hardware drivers
- fixed possible locking problems (deadlock)
- fixed hybrid tuner (cxd1981) init problem,
add possibilty for faster mode change via
FE_SET_PROPERTY DTV_DELIVERY_SYSTEM ioctl
- bcm4505 small typo fixed
- better /proc/stb(vmpeg/X/dst_* handling via dst_apply

http://sources.dreamboxupdate.com/opendreambox/1.6/dm800/experimental/dm800/dreambox-dvb-modules_2.6.18-7.4-dm800-20110902-r0_dm800.ipk

THESE DRIVERS ARE FOR GENUINE DREAMBOX RECEIVERS ONLY DO NOT USE ON CLONES