Hi,
I don't think I need to open any ports since I run this inside my own local network?
Hi,
I don't think I need to open any ports since I run this inside my own local network?
Hi,
Running 2 vu+solo boxes at home.
In my "main" box I have 0B00 CD Nordic card in internal and 093E Via in Smargo.
On my other box, I see "0 of 2 cards" and can't figure out how to solve this.
I can see both cards/channels on my main box, but not the 093E card on my second, for some reason.
oscam 1.20-untable_svn build r11222
Please, any oscam guru out there, take a look and see if I do something wrong.
Thank you.
Main-box:
oscam.conf
[global]
serverip = 192.168.0.110
logfile = /var/log/oscam.log
nice = -1
block_same_ip = 0
block_same_name = 0
[cache]
[newcamd]
port = 10001@0963:000000
key = 0102030405060708091011121314
[cccam]
port = 11000
serverip = 192.168.0.110
nodeid = 999E4E1210E114BC
version = 2.2.1
reshare = 4
reshare_mode = 0
[dvbapi]
enabled = 1
au = 1
user = internal
boxtype = dreambox
[webif]
httpport = 8888
httpuser = xxxxx
httppwd = xxxxx
httptpl = /etc/piconwebif/
httprefresh = 15
httpshowpicons = 1
httpallowed = 192.168.0.0-255.255.255.255
Display More
oscam.user
[account]
user = internal
description = dvbapi
caid = 0B00,093E,090F,0919
keepalive = 1
au = 1
group = 1
cccreshare = 4
cccignorereshare = 1
[account]
user = box2
pwd = xxxxx
description = yyyyy
caid = 0B00,093E,090F
keepalive = 1
au = 1
group = 1,2
cccreshare = 4
cccignorereshare = 1
Display More
oscam.server
[reader]
label = canal_digital
description = canaldigital
protocol = internal
device = /dev/sci0
caid = 0B00
detect = cd
mhz = 500
ident = 0B00:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
cccreshare = 4
ccchop = 4
[reader]
label = viasat
description = viasat
protocol = smargo
device = /dev/ttyUSB1
autospeed = 0
caid = 093E
boxid = removed
detect = cd
mhz = 369
cardmhz = 369
ident = 093E:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
cccreshare = 4
ccchop = 4
Display More
Box-2
oscam.conf
[global]
serverip = 192.168.0.120
logfile = /dev/null
nice = -10
maxlogsize = 0
block_same_ip = 0
block_same_name = 0
usrfile = oscam.user
failbantime = 60000
failbancount = 3
[cache]
[cccam]
port = 11002
serverip = 192.168.0.120
nodeid = 5E5B522E10C31440
version = 2.2.1
forward_origin_card = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = internal
boxtype = dreambox
[monitor]
port = 988
nocrypt = 127.0.0.1
monlevel = 4
[webif]
httpport = 8888
httpuser = xxxxx
httppwd = yyyyy
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255,127.0.0.1,255.255.255.255,255.255.255.255,192.168.0.0-192.168.255.255
Display More
oscam.user
[account]
user = internal
description = dvbapi
caid = 0B00,093E,090F,0919
keepalive = 1
au = 1
group = 1
cccreshare = 4
cccignorereshare = 1
oscam.server
[reader]
label = box2
description = kitchen
protocol = cccam
device = 192.168.0.110,11000
user = xxxxx
password = yyyyy
inactivitytimeout = 30
caid = 0B00,093E,090F
group = 1
blockemm-unknown = 1
blockemm-g = 1
cccversion = 2.1.4
cccmindown = 1
ccckeepalive = 1
Display More
Hi,
I have a 093e card running for a very long time in my vu+. Nothing done to the image, box or reader during this time.
Now I see this in my log:
viasat [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
viasat [videoguard2] classD3 ins54: no cw --> Tier expired
Is it just for me to run it in my SD tuner for some time? What can I do to prevent this?
Strange that this happens now, because the card updates with new dates all the time.
Thanks for your reply.
Hi,
Found this guide here on the forum, but just can't get it to work...
http://linuxsat-support.com/showthread.php?t=17164
I edit the /var/etc/enigma2/userbouquet.favourites.radio
#NAME
#SERVICE 1:0:2:DB9:1C:56:300000:0:0:0:
#SERVICE 1:0:2:5EB:1C:56:300000:0:0:0:
#SERVICE 1:0:2:1252:1A:56:300000:0:0:0:
#SERVICE 1:0:2:5E1:1C:56:300000:0:0:0:
#SERVICE 1:0:2:DAD:23:46:E060000:0:0:0:
#SERVICE 4097:0:0:0:0:0:0:0:0:0:http%3a//stream.sbsradio.no%3a8000/radiorock.mp3.m3u:Rock
#DESCRIPTION Rock
The first 5 stations is "normal" one, but when I add the .m3u link it renames the last radio station to "Roc" and still play the 5. station.
Anyone that know how to to this, that can test and help me with the correct setup?
I tried adding several other stations that I found on the forum, but no change..
The link to the webradio is: http://stream.sbsradio.no:8000/radiorock.aac.m3u
It's game over. Viasat now use the same system both on cd and hd channels :stoned:
That is not any good news, but anyway to confirm this?
Regarding your error in first post, I read someplace else that "not paired" is because of no or wrong box id?
I have not found much info about this, beside Stuken's post here: http://linuxsat-support.com/showthread.php?t=70579
They clearly did something, for all settings are the same.
I thought the box-id was the pairing.. but clearly it is not... :(
Well, never going back to the crappy original tuner, running 2 tuners, with all those problems... so 1 less customer. Viasat broadcast mainly commercial-crap channels running soap, "reality".. just on viasat for F1, but F1 is found on other channles as well.
Thank you stuken, for clearing that out. Then via!"#¤ has done SOMETHING to force me back to their crap original tuner :( :(
- - - Updated - - -
This is my error:
2014/11/04 18:35:31 5AB478 r viasat [***********] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
This is what I get, but all entitlements is OK. :(
That is on all SD TV3 channels.
- - - Updated - - -
Any progress stuken?
Startet having issues my self yesterday. But it was at the same time as i was forced to reflash my vu+ solo.
I run oscam with a smargo reader, but I do not get the same error.
The card report "Card ok" but the "user" don't get any picture. :(
Did it work earlier, or is this a new setup?
Box ID missing?
Box id is there, and is the same as I have used for at least 1 year.
Maybe dvbapi config?
Not sure what you mean, please explain?
I have the dvbapi settings ok. I will post picture of the whole info-screen when I am home.
Hi,
I have been strugeling to find a working oscam for my vu+ solo running Black Hole image.
I thought I had a backup om everything, and after a (fatal) crash of my vu+solo I can't make it run OK on one caid, so it might be the oscam version.
Can someone tell me (and hopefully a direct link) what version that work with a smargo-reader?
Thank you :)
Hi
VU+ BH and OScam 1.20 r9127
093e card in smargo reader. Worked for a very long time.
Today my box crashed, and I had to flash and put everything back. I have backup, but still something is wrong.
5ec2278751a8.jpg
The status is OK like it allways is, but the "client" do not get OK or any picture.
My other 0B00 card works just fine.
The entitlements is also OK for the rest of the year on the 093E card.
Anyone with a working 093E card in Smargo that can send me their config?
Hi
Looking into this picon thing :)
Can I have picons in my channel list on a vu+ solo with Black Hole image?
I use oscam, and read that I also can show picons in the web-info page?
Sent from my iPhone using Tapatalk
Hi,
I wonder if it is possible to reshare a mgcamd line to my second box? I get one connection and would like to reshare this to my second box :)
I have newcs on it aswell, can that do the trick?
Hi
I'm only on my phone now, but will gladly help later with files and paths. If you are not helped by someone else :)
Sent from my iPhone using Tapatalk
Ok. Thank you again for your (fast) help!
For the non-linux users, what file should I choose in the future? (for the same box, with usb smargo reader)
Is this the correct one: Dir/ mips-tuxbox-oe2.0 File: oscam-svn9127-mips-tuxbox-oe2.0-webif-libusb-Distribution.tar.gz
What file did you use? I might not been patient enough to wait and see, but this one worked! Thank you. Since I had all my other config files, except the binary, everything just poped up like a charm :)
I hope I am not all that lost, but I tried with oscam-svn9125-mips-tuxbox-oe2.0-webif-libusb-Distribution.tar.gz from download directory here at the forum: mips-tuxbox-oe2.0(All Dreambox HD & VU )
Is it the same, just that the one I found is 9125 and yours 9127?
Hi,
Tried to download every .ipk package from 6073 to 9125 I can find, but with no luck :)
Can someone tell me what I need to download?
I want to have my vu+ solo with latest BlackHole 2.0.8 running oscam with cccam and to read my smargo reader.
Every .ipk file I download tell me that during the testing of the file, it is not supported... :(
Please help, the kids are asking a lot to see TV :)