Hi all
Can anyone tell me if KiddaC Slyk Q 1080 (Version 1.30 works on ATV 6.5? including abm, as i ready a few weeks back there was some issues on python etc?
thanks in advanced
Hi all
Can anyone tell me if KiddaC Slyk Q 1080 (Version 1.30 works on ATV 6.5? including abm, as i ready a few weeks back there was some issues on python etc?
thanks in advanced
Hi,
Can anyone tell me if there is a way of watching IPTV on the Prismcube? Excluding repo options. Can anyone point me in the right direction please? :/ for example
Anyway of adding an app like emu stb
yeepee its working! so for chatham and some parts of kent its actually croydon 40979. Really please thank you for the guidance.
not sure if you want to close the thread or keep it open to assist anyone that needs the help in the area. leave to you guys. :36_002::36_002::36_002::36_002::36_002:
Hi all
i ve tried 41069 lewisham even no joy
heres the postal location im tried to pick up for ME5 chatham.
also tried bromley.
the dvb-c tuner is sat as vm pure uk
Thanks everyone, you've all been helpful! The only snag there is no TiVo or any sort of vm box. I'm using enigma2 set top on OpenVix. Just decided to switch from satellite to cable and use redundant wires. I'll give it ago.
I'll also update the thread if I get a fix hopefully this might help anyone else in that region
Sorry on sam knows it comes up as Medway but that's not an option on in provider area
Hi all
I have setup a DVB-C option on OpenVix but I'm struggling to find which exchange area I should select for Chatham in Kent. I've scrolled through the list on 'provider areas' and not really sure which is the correct option.
I've checked 'Sam knows' website and marine is the nearest exchange however thats not listed in autobouquetmaker.
Any help will be appreciated.
Thanks
Hi All,
I was hoping to get some fix on a Gigablue HD Quad Plus. The problem i'm getting is whenever i install a 'OE a lcdskin' from plugins/display/ the install causes the receiver not to complete full reboot. it gets stuck on about 39/49%. It only occurs when installing any oe a lcdskin display files from that folder.
The image i have used is openvix 4.2 build 021. I have a HDD mounted but it still occured prior to installing the HDD.
Whenever this occurs i have to reflash again and avoid installing the oe a lcdskin for the receiver to boot 100%.
any ideas?
thank you
h2014
Hi Abu, build 015 works great! thank you. thank you all
Hi Guys
OK i had tried Lraizer autobouquetmaker and still no joy. Its really strange as no image works on the cable tuner side. when i try the exact same setup on a vu+ model it works a treat. i'm 100 percent using the correct cable tuner.
I decided to reflash the image again for the Gigablue Ultra UE to: OPENVIX 3.2 37 build. Hopefully the images attached may help you guys to get an idea of my setup.
What i had found is that it will only find 19 channels from 33% scan onwards at qam256.
323ccbb73363ef31.png726b28c96a5f.pngd0d8b5ed95c123c.png0f97214afdf1aa2260c1b.pnga38b3bd9fb0.pnga06217.pngd4065b766dc78718ed0.png
- - - Updated - - -
I also get time out for tuner lock when it reached vm scan via autobouquetmaker or Lraizer option. i know its seperate issue from a cable scan but thought id mention this in case it helps
Hi Abu Baniaz and Digi247,
I will try this asap and get back to you. thank you
Hello,
I have a new ultra UE and X3 from gigablue but it only scans/works with satellite and terrestrial. I have tried all 3 different tuner types.
1) hybrid tuner
2) hybrid t2 tuner
3) hybrid twin tuner
none of them scan cable with ABM (autobouquetmaker) or normal cable scan. i have selected OpenTV proivders sly and Rytec vm uk. still doesn't work. It says 'time out for tuner lock'. I know ABM is ok because the tuner does not scan with standard automatic or manual scan. it only finds satellite.
i have tried with openvix openatv and the offical firmware image. no luck!
any help here?? ;(
Hi Thank you for the quick response. guess its the end of the road for this duo.
click right on progarme boardcom.exe and chose kompatbiltet, then in the windowos below
chose Wndoes 8.
Hi I have Windows 10 and it does not have the option to change to windows 10 in capabilities. Do you have a solution please?
- - - Updated - - -
Hi all
I have windows 10 and when i turn on the bbs tool and connect to the laptop via usb it doe NOT detect the tool. Therefore when i start broadcom studio 3/devices/bcm97335 for Duo. its still says disconnection.
Im guess its because i haven't installed the 'recommended installation in the screenshot for the bbs tool. but windows 10 does not detect the tool.
any ideas please???
- - - Updated - - -
Sorry attached screen shot
Hello Members,
I guess this is for those who have Vu+ and for myself who really want to know how to set up KODI / XBMC on our Vu+ Receivers. Can anyone help with a guide to how we can set this up specifically for Vu+ receivers??
WOULD BE A MASSIVE HELP TO US ALL!!!
h2014:59:
Hi hullstorage,
a little baffled... do you have the same receiver as your friend? why not replicate his set-up to yours?
thank you guys for your feedback and help
Hi Master G,
I have sent the receiver back to have it replaced or refunded. Thank you for the link but that was the first thing i tried and no joy!
Thank you once again!!!
Hi all,
I have a ET10000 HD, its brand new but when i power up from the rocker switch it shows the power button on a blue light but no display on the front display screen of the receiver. Also I cannot flash with bootloader or image as there's no picture on TV screen and receiver display??
any ideas?
Thanks
H2014
Hi Everyone,
I have always wanted to learn how developers such as vix team and openatv create firmware images. I want to learn how to create my own, Can anyone guide me on the tools/programs used to develop such firmware. I would be very grateful.
Many Thanks
H2014