Posts by n95k

Below is FW file contents, userdb and updaetdb seems the only change from previous versions, and also that annoying avatarcam and pin request for cam screen is gone. CCcam is still ver 2.14, So far the box is stable.

Encontrado en Bloque : 23010010
Offset : 0
Tamaño : 65536
Nom : bootloader
Version : SMT---1.0.0
Datos :2009-08-27

Encontrado en Bloque : 01FE0101
Offset : 65536
Tamaño : 1900544
Nom : maincode
Version : SMT 1.0.0
Datos :2009-08-27

Encontrado en Bloque : 02FD0100
Offset : 1966080
Tamaño : 65536
Nom : Radioback
Version : 1.0.0
Datos :2009-08-27

Encontrado en Bloque : 02FD0200
Offset : 2031616
Tamaño : 65536
Nom : Bootback
Version : 1.0.0
Datos :2009-08-27

Encontrado en Bloque : 05FA0100
Offset : 2097152
Tamaño : 65536
Nom : upgcode
Version : upg 1.0.0
Datos :2009-05-4

Encontrado en Bloque : 03FC0100
Offset : 2162688
Tamaño : 130944
Nom : defaultdb
Version : 1.1.0
Datos :2011-11-17

Encontrado en Bloque : 04FB0100
Offset : 2293632
Tamaño : 1900672
Nom : userdb
Version : 1.0.0
Datos :2011-11-17

yojiatech.com/a/Support/

or you can run a local server and add the cline to that and make the boxes login to the the local server. You must have atleast 1 hop reshare on the cline.

Try the september 14th firmware, the avatarcam version is buggy.

Sweeet! got it going just as I connected the box (was trying a loop back), proxy works fine. The cline providers were informed to be on the same page. Box performance is much better. now to look for that old laptop to make a proxy proper.

Hi I have two clines that work on different providers and one common provider. my box keeps hanging when the peers reset or change on the two clines, I have to change channels to get the picture back. So can I create a oscam server on my internel net and filter the providers I need from the clines and then point my box to one cline or nline on my private net server?

Got it it was a typo in a ip allowed line, 195 was wrong should be 192 works fine now.

Hi all I am trying to setup a oscam win server using

http://tekreaders.com/oscam/cygwin/oscam-cygwin-svn-6018.zip

the config is ok and the I can start oscam however, when I access with webif port (http://192.168.xxx.50:81 ) it does not load the page and puts the fol error in the log, what can be the reason?

--- snipped from oscam .log ---
2011/11/09 15:18:33 0 s waiting for local card init
2011/11/09 15:18:33 82E4B8 h HTTP Server listening on port 81
2011/11/09 15:18:34 0 s init for all local cards done
2011/11/09 15:18:34 0 s anti cascading disabled
2011/11/09 15:19:02 82E4B8 h unauthorized access from 192.168.xxx.50 flag 1
--- end smip ---

--- snipped oscam.conf ---
[webif]
httpport = 81
httpuser = test
httppwd = test
httpallowed = 195.168.xxx.1-192.168.xxx.100
httphelplang = en

-- end snip --
appreciate your advise!

You are welcome, we are here to help each other, Glad that you got it going!

Hi, Are all your boxes on the same firmware? I found that the version OPENBOX_S10_110914 as the most stable. There is OPENBOX_S10_1011.RAR unless you need to hide your clines and avatarcam, this is almost the same as before. Also are you sharing one nline? or have a nline each for the boxes?

You can also do a factory reset on this box and manually add the nline and try. lastly are you all using the same internet provider? if so try the problem box on another provider, ie via mobile broadband if available.

Does anyone know if I can use Yumatu Full HD MINI firmware on a OPENBOX S10?

Hi all and MasterG the title has to change like above, I do not have betacrypt cards. I need to know how the data was obtained from the box/s? thanx.

I came across this post, see the post by maiser he had posted the data received from a dreambox and openbox. Can anyone kindly explain to me to how this data is extracted. My message to him went unanswered.

This might help me fix a problem I have with my S10

This is the problem you see ! Sky Deutschland 19.2E caid:1702 000000 S01/S02/P01/P02 Betacrypt 93

Don't set 89 for HD Channels. Use Autotunnel / Betatunnel.

nfo: DREAMBOX         [14:38:27.887] Data received from CCcam client DREAMBOX, data length: 160:
17 02 00 00 00 00 00 00 00 6D 00 72 [size=12][COLOR='#FF0000']93[/COLOR][/SIZE] 81 70 90
C7 00 00 00 01 10 10 00 87 13 07 84 00 85 2C 09
73 EF B5 D4 32 72 53 17 FA 12 32 72 91 79 25 4F
1D FD DD 38 CF 4E 21 73 B2 E5 05 A1 C8 FC 0B 21
B8 11 8F E8 CA 85 F5 FE 00 27 76 1B E6 BE 38 7E
96 44 8A B4 0B 5B AD AD 15 D6 DD EE 92 D1 63 B7
E6 5C 7F F6 02 F6 EB DA 3B 6A 02 2B 24 F1 44 AC
43 CA ED B8 26 22 54 22 64 FA D0 78 06 A0 DD 38
CC 3D 41 7E 89 8A 99 CB 37 91 BB 66 F6 AB A4 6C
81 F1 32 56 DA DB C9 43 7F 76 47 59 9A F0 03 71

and this is the openbox s9 cccam logfile

Info: openboxS9         [15:00:28.492] Data received from CCcam client openboxS9, data length: 150:
17 02 00 00 00 00 00 00 00 6D 00 72 [size=12][COLOR='#FF0000']89[/COLOR][/SIZE] 81 30 86
07 84 00 51 A9 CD DD A2 68 1A 1E 71 85 4E 59 6D
B0 F2 8F 5B D0 FB D0 0F 38 8D E8 F9 57 9F 88 67
64 FD 41 27 30 79 C8 ED EE 86 EA 64 BD D4 BE 49
C9 AA BF 01 2A 7F 1F 81 A4 5A A9 15 A1 61 EE BA
1E 91 CE B7 7D 1A C1 26 ED F5 A8 C4 53 CD 2D 4B
92 D0 DE BD 8B 34 A6 61 29 3A 74 D2 27 C9 04 E7
8F A1 92 E5 1F DD A0 A7 B4 36 1F 5D 26 70 1F 08
9C D0 25 81 9E 29 18 C1 B9 FC 1A CE A1 8C EB 70
4A 70 A0 EE 08 A8

Hi Jack welcome to the club, if your box is an original, then rest easy that dump is not very important as we all have good dumps that we can send you. As for the cccam.cfg, the box comes with a blank most of the time unless you got it from a server holder. So you can either enter the cline straight via the remore, or create a file using a text editor and then upload using USB or using the Lan Manager tool. find a good cline for your birds and then use any of the above three methds to open the channels. I believe that you have scanned the bird and got the channels. good luck!.

Does the transponsder show signal strength/quaity? if not your LNBV freqauncy range may be wrong, change that and try, also there are three scan modes, preset scan, blind scan and single transponder scan, which scen is that returns no channels. Using lan_manager or usb backup your tp_prog.dbs, then delete all transponders of your satellite, and do a blind scan. that should find the live transpondrs and channels. Good luck.

Yes and thanks mate, same here have not found any though found this in a forum where the pids were changed from 6100 to 6103. It is on a dreambox I guess, when I tried this with the replace.list nothing happens.

The pic is in webp format, cat direct upload hence the zip file.

Thanks mate, I believe that you pointed me in the right direction to replace the channel, doing that with replace.list for vpid did not work, however it might work if I can find the correct PMT pids and use setedit as I managed to get it working. So now to look for the PMT pids for nss6. any tips will be appreciated.

Thanks masterg, no luck with that either, says error opening file.

No luck cazuela, dreamset does not talk to the box. there is hardly any software that can see what is going on on the box. so that option is out. is there any cccam/mgcam/newcam config file that can replace pids?

Thanks for the prompt reply, the chanels were loaded off a published list and since it didnt work did a blind scan and both the lists are the same. Have tried with 3 different piers result is the same and I am not using softcam or other config files are used than the clines in cccam.cfg.

can you kindly explain the pid change method? how do I do that?