Posts by abu baniaz

Hardware:
Connect signal wire to Tuner B

Software:
Tuner B: Leave configured as you described.
Tuner A: Configure as loop through to Tuner B

The channels are showing N/A because they are not available. This usually happens when people have a set of bouquets and the channel data in the bouquets is no longer applicable or they changed their tuner configuration and removed the "no longer configured satellites".

ABM updates bouquets and services, but only the ones it maintains.

Can you post a picture showing these N/A channels.

As you have decided not to say what image you are using, the following covers all options."

Download the oscam version you want. Stop oscam. Replace the existing one in your receiver. Make sure you use same name as existing one. Restart oscam"

These are Hos777's picons in SNP format for dvb-c/s/t. As they are from 2014, a few channels will be missing.

On DW there is an option to exclude sections. I use it to exclude the betting section as sometime you get a lot of posts that I know I won't be viewing, so nice to be able to exclude those.

Sent from my HTC One M9PLUS using Forum Fiend v1.3.3.

Good grief! An admin/mod deleted the picture with your modem on it, and you go and post another one!

If you are having picture breakup, it is signal issue.

- - - Updated - - -

Quote

Can I upload channels via dreamboxEdit together with Cable channels?

Simple:
Yes

Comprehensive:
How you make your bouquets is up to you. You can have a mixmatch between cable and satellite and send them to receiver

Quote

can you also forward me some iptiv ipk file please..... to upload via dreamboxedit please

The various Installation packages are posted on the forum. Download them.

You transfer them to the receiver using FTP clients such as Filezilla, DCC, VuCC

See this thread
http://linuxsat-support.com/showthread.php?t=4392

Streaming from box is treated same as recording. Maybe someone helping themselves to your receiver?

Sent from my HTC One M9PLUS using Forum Fiend v1.3.3.

Quote from difficult

here is my cable modem......

Edit your post and delete the picture.

If you are going to post a picture of your modem's serial number and MAC address, you might as well as post your name and address too.

Skin has no impact on these matters.

Just because you have spot on speed internet, it does not mean you have correct signal for TV reception.

Not fair on seller if you have localised issue. Not fair on you if tuner is faulty. But we don't know what the case is.

Post 15, DVB-C:
They do not add filters. The signal levels are adjusted for what you subscribe to. You may have too little power (you would need to use an amplifier or subscribe to TV services) or you can have too much. You would need to use an attenuator.

Post 16.
I don't understand what you are stating/asking.

Post 14:
I had asked to connect to an aerial to check if the tuner functions for that aspect.

Sorry out of ideas.

One last thing, can you connect to an aerial. Set tuner as terrestrial and perform a scan. This will check tuner.

Remove the splitter and connect cable directly. You will lose internet while you do so.

1. Can you confirm that you have an active DVB-C signal?

2. If your image allows you, perform a scan with these settings.

Note: When you take a screenshot using web interface, you can right click on the picture and save it.

So what happens when you use that in ABM?

Do you get any Cable channels that are viewable when you perform a normal scan (not use ABM)?

have you confirmed that you are using the correct net id?

Commando 15.1e for DM500S or DM500C Release image 05/05/2016

Here we are at last, phew! Welcome to Commando 15.1e for DM500C or DM500S boxes, built today, Thursday 5th May 2016 at around 1330 (but thoroughly tested last 3 days in beta stages)

Main innovation with this release is that Online Updates are back! With a subtle difference from before though... Now, it's automated in the background during restart, taking seconds. The BLUE > BLUE menu page for Updates is now a simple status report, with info. Three possible messages:

Your C15 image is bang up to date!
Image has auto-updated! Press BLUE
Unknown! Press BLUE for more info

In the last two cases, further advice is given. We have resown the seeds for possible root image updates, but currently have no plans to implement this, as it needs time for the dust to settle...

Other enhancements are a big makeover on Renny's caminfo feature (BLUE > MENU > GREEN) which now smart detects if your box is Sat or Cable AND if it's in UK (or not).

Helpfiles have been updated as well, with a new one, too. Find it!

Not to mention LraiZer's revamped 4 year old nitscan tool for UK DM500C, which creates a new local vm cables.xml for you, direct from the feed, in under 30 seconds, ready for a reliable AutoBouquets VM scan (typically 3 mins)

Naturally, the schoolboy errors (or rather, dopey Old Git errors) present in the last C15.1d release have also been attended to. But this time, TC are rather hoping for a silly bug feedback report that we can fix in the first Online Update, the next time you restart your box, LOL!

As always, have fun!

Team Commando (and Apprentice) ;)

Copy and paste of [MENTION=220217]pap[/MENTION]hosAL's thread on another forum

The HDDs in the Sky receivers do not have error checking in them. Do not use it for critical files. You should be able to connect it and just format it.

the Vu USB tuner and Sundtek work. I prefer Sundtek as it works on any receiver as well as on PC. Any issues are fixed quickly.

Sent from my HTC One M9PLUS using Forum Fiend v1.3.3.

You have connected lnb incorrectly or dish size is incompatible with lab.

what satellite is the dish focussed on? Post a picture of your dish/lnb

Edit:
Are you not able to select 19.2 at all? If that is the case, your satellites.xml has been stripped, it only contains 13e. You need to replace it. There is a downlaod link on the drop down menu of of forum.

May I ask why you have two PC/Servers in the mix. Would it not be easier to have just one?