Posts by abu baniaz

Define channels disappeared. Channels not clearing or channels not being received.

If not clearing, check with your peer.

If not receiving, check the Virgin webiste for localised issues. Check FTA channels.

Quote from bodiddly

I don`t use snps,maybe that`s the problem? I use the default skin in the latest Blackhole image for Duo2.

Thanx.
bo.

Blackhole added SNP code a while back IIRC. It is most likley the skin you are using.

A monoblock is essentaill two lnbs with a built-in diseqc switch. If you get tune failed with the settings above, reverse the ports. i.e

Configuration mode = simple
Mode = diseqc A/B
Port A= 19.2 E Astra.
Port B = Hotbird 13.0 E

Quote from marts

when i run this its say something about this channel has no data aborting any help

Please try latest version

http://linuxsat-support.com/showthread.php?t=18085&p=347270&viewfull=1#post347270

2016-04-20
Reader files rebuilt on older architecture so that they work on older images.

The readers were compiled on newer software and wont work on older images. Until this is sorted out, use an older version. Do not use "HD first" or "swap".

Quote from Sparkyuk

Is there a newer version available ?

No. 25th Jan 2016 is the current version

Quote from SatelliteJunkie

I'm getting all the ITV HD channels on my official Sky HD boxes but I can't get them on my VU+ Duo2.

Are you using this card in your Duo2?
(i.e Are you using a card that has HD entitlements)

Note:
white card paired to HD box (not Thomson) = won't work
red card paired any HD box = will work

Quote from SatelliteJunkie

I did believe you. Not sure what you're referring to but on the forum we're on now I said my card is red.

To save any hassle I'm in the process of pairing my Red card to my official Sky+HD box and my white card from that box will be paired to my VU+ Duo2 so I don't need to enter the boxkey,etc.

You cannot pair a sky card to your duo2. If it is relevant, you cannot pair two different sky cards to one sky receiver either.

If I may make a suggestion, explain your intended outcome in the simplest terms possible. Then expalin your current setup, people will assist. If you want to, you can have configs so that you use two cards. MasterG has offered to help you with the box key. Hopefully, your issue will be resolved.

Posting box serial numbers in the open is not a good idea.

On the other forum, I told him that he can pair the red card to a HD receiver and it will still work. I dont think he believed me. He said he had a white card on that forum.

I also suspect that he is mixing up cards between the three receivers. Linux, SD and HD. Or he is and using two different cards on his Linux receiver depending on what he is doing at the time. I post not to cause offence but to give some background information for those assisting him by PM.

2016-04-11 combined version

Has modified reader file so that when selecting HD first, total number does not affect other bouquet
Custom swap is based on England numbers. If you are not in England, please edit the swap section so that it contans your numbers for BBC 1 HD and BBC 2 HD Use Notepad++

#swap local SD with HD.
141=101
115=102

Continue to use the "Central Midlands Custom" selection. In the configure menu, enable the "include non-indexed channels" option. You must rerun ABM after enabling the option.

Try tomorrow's build. There was a fix a couple of hours ago

https://github.com/oe-alliance/oe-alliance-core/commit/77dd819408f66147b54758f77e167eef0e41664a

Legacy cams will stop working at some stage. Best to learn how to use oscam. If you get stuck, ask.

There was arecent fix to resolve the issue. The basic fault was that the last movie location was not available.

However, for those on older images, the workaround is to stop enigma2 with "init 4" command. The settings file in /etc/enigma2 needs to be edited. The movie location needs to be deleted.

Quote from CG121

When you say remove, remove the previous bouquets?

It removes the previous version of the plugin preinst file has the following

#!/bin/sh




echo "Checking for an older version of AutoBouquets for cable in the system..."




if [ -d /usr/lib/enigma2/python/Plugins/Extensions/AutoBouquets_C2 ]; then
	rm -rf /usr/lib/enigma2/python/Plugins/Extensions/AutoBouquets_C2 > /dev/null 2>&1
	echo "An older version of AutoBouquets Cable was found and removed"
	echo "Proceeding to installation..."
else
	echo "AutoBouquets C2 was not found in the system"
	echo "Proceeding to installation..."
fi




exit 0

Quote from CG121

The DVBSnoop idea is good (can't believe we didn't consider it beforehand lol)

The versions I uploaded to ukcvs had this. I shared notes with MasterG to ensure we sing from the same hymn sheet. postinst file has the following

#!/bin/sh




echo "*                               *"
echo "* plugin installed successfully *"
echo "*                               *"
echo "* Enigma2 restart is required!  *"
echo "*                               *"
echo "* By LraiZer - www.ukcvs.org    *"




if [ ! -e /usr/bin/dvbsnoop ]; then
echo "dvbsnoop not found!"
echo "Please install it"
fi




exit 0

You are on a really old version. Install latest version, go to last post of this thread
http://linuxsat-support.com/showthread.php?t=18085&p=344018&viewfull=1#post344018

P.S
When people posts a screenshot like this, all the settings can be seen.

AB 28.2 is now on github and the image teams should always have the latest version when they build images. So, when you update your image, you will have latest AB 28.2. In those versions, there is no option for selecting the architecture. This is because you will have the one appropriate to your receiver.

For the benefit of those who do not want to be on latest image, here is the 20160331 version (you must select architecture) which will have the amendments for BBC One HD going to channel 115.

Without knowing what settings you are using or even the version of the plugin you are using, impossible to find out what is wrong. All te valibal HD chanensl should be pulled in for you.

Post a screenshot of the settings page.

Transfer the ipk to /tmp and install by command line. This will reveal any errors and allow for fixes (if possible).

opkg install /tmp/*.ipk

After installation, start it by command line

cd /usr/softcams/
./mgcamd

report back with any errors

Or use CCcamswitcher