Posts by abu baniaz

What is teh version date of your AB 28.2 plugin? Latest version is 24/09/2014.

Why are you sending all files with DCC? Lamedb is kept in RAM and will cause you issues unless you put it to enigma to sleep first before transferring. The previous post was specific to missing satellites.xml. Apologies if this is waht led you to do so.

You may have configured your DBedit setting incorrectly/or as above something wrong with your chanenl list. Post screenshot of your settings for dbedit and uplaod your channel list.

Using ftp client such as DCC/Filezilla, can you navigate to /etc/tuxbox and post a screenshot of contents.

Glad to hear and well done. May it bring you years of usage with no further issues.

In the config of ABM, have you said yes to "keep all bouquets" or words to that effect? You will have to change config from simple to expert to see option.

Run ABM after transferring lists and you'll be OK.

Are you using AutoBouquetsMaker or AutoBouquets?

You cannot have two channels in the same position.

If you have enabled other/extra, you will find the channel in the other bouquet. If you are using custom sort, you can add the channel to your entertainment bouquet. The plugin is very customiseable, so withpout knowing what your exact setup of plugin is, hard to advise.

This is 24/09/2014 version. No HD regions available on this version. (This does not mean FTA and odd working HD channels are not available.) If you insist on using a HD region, please do not use this version. Ipk is for mipsel receivers and won't work on SH4 receivers without replacing the reader. Reader is included

Not Lraizer's edits so he may reject these at a later date.

24-09-2014 Not by Lraizer
Readme file amended. Installation at top. Removed reference to dvbsnoop installation
Added Dundee region. Thanks to Jimbo.
Temporarily commented out HD regions
Orphaned news channels moved out of documentaries for sort files 1/2/3
Swap/ordering defaulted to True in line 166.




Sorting options:- to stop people saying "numbers don't match"
> "Default" renamed "Large 1st Bouquet"
> "Out of the box" option is now "HD first". Will lead to Entertainment bouquet starting at 101.
> People wanting the large first bouquet to use < & > buttons can still select it.

Quote from abu baniaz

You cannot connect to tuner A and then use loop through

Should add that this is an issue/limitation on Solo2 and TM Nano 2 Super. On other receivers it works both ways.

When you edit the file, no change to filename will occur.

Location was mentioned above, it is

Quote

/usr/keys/

As above, the tuner should havea cable from LNB port to it directly. You should not split a feed.

Until you arrange for new cabling/lnb, you can connect cable to Tuner B, and set tuner A = loophtough to Tuner B. (You cannot connect to tuner A and then use loop through)

Simplest option:
Uninstalll the current one, install the version that is in the Vix plugin feeds. Those chanenls will just be skipped intead of being renamed.

An aside
With regards to ABM, yuo can achieve teh same thing by using ZoomZomLukes' xml

Quote from rumpole

if it's to use one box at a time on the set up, and as the op has
a duo2 that dos'nt have a loop out i would have thought a twin lnb
fitted on a motorised dish. then send the second cable to the other room
and as long as box a was on standby then box b would move the dish and visa versa for box a
this could be the easiest and simplest way to set up the two boxes.

You can only move teh dish by coax connected to motor. The other cable direct to lnb is limited to view the satellite that the dish is pointing to. No limitations as to what chanenl on that satellite and no need to have first receiver on standby.

Any E2 receiver with remote stream converter will allow you to view what is on the "server receiver"

I'm sure you can use a Pi to do it too.

If you are flashing an image by GJstroom, they have 84D bootloaders included. You can flash on receiver with any 84* bootloader. As it is not working, you may wish to try a different browser. I tend to use I.E for flashing DMs

Rat/Snapman's picons for UK DTT. Many thanks to both of them for the picons, I just did the service references. (Should work anywhere in the UK).

Channels not done

ITVbe
Movie mix
Pop+1
The store
TBN UK
truTV+1

Following programs should be all you need

Any FTP program..............e.g Filezilla
A linux compatible editor....e.g Notepad++
Any telnet program...........e.g Putty
Any channel editor............e.g Dreamboxedit/Dreamset.

You are limited to Openvix/OpenATV/4D's Pli based images. Openvix will not include the applications for which TM do not have licences. Most E2 images work the same anyway. Best to try them and use the one you like most.

ABM will also work on PLI images.

On Black Hole, you get an error about expecting two arguments. It's open source, so can be forked/edited to work on Black Hole.

No feed available for images below Apollo 32.

These readers omit HD channels that are not FTA.

ITV HD , and the other working encrypted chanenls can have their attributes changed by editing the supplement file.

#FTA conversion for available channels
####################################################




#ITV HD    
95:6502::::::FTA:
96:6503::::::FTA:
1033:6505::::::FTA:




178:6502::::::FTA:
178:6503::::::FTA:
178:6504::::::FTA:
178:6505::::::FTA:




103:6502::::::FTA:
103:6503::::::FTA:
103:6504::::::FTA:
103:6505::::::FTA:




    
#RTE TWO HD        
224:1270::::::FTA:

#Film4 HD
315:4044::::::FTA:
342:4044::::::FTA:







#BT Sport 2 HD            
427:3627::::::FTA:
427:3628::::::FTA:
1076:3628::::::FTA:




#ESPN HD            
433:4040::::::FTA:
433:4041::::::FTA:    
1072:4041::::::FTA:




#BoxNation HD            
490:5039::::::FTA:




#*** News HD            
501:4050::::::FTA:
516:4050::::::FTA:





#BT Sport 1 HD            
426:3625::::::FTA:
426:3626::::::FTA:
1074:3626::::::FTA:




####################################################################